Recommended
Likes
Comments
Share
Va tutto come previsto. Crescono rapidamente e già hanno iniziato a prendere la forma di piantine vigorose. È stata una germinazione impeccabile! I cloni di Orange Bud con calma stanno prendendo vigore e forza, sono posizionati in penombra e le radici sembrano più evidenti! Le piante madri in rigenerazione sono enormi già! Si procede con passione ed amore, un abbraccio a tutti!
Likes
1
Share
@TTerpz
Follow
Start of week 5 (day 1) 8/20/25 Flushed with sledgehammer: 5/21/25
Likes
20
Share
Cruising through the week. Stopped stretching around 4 ft 1 inch. From measuring from top of soil to the top. Such a beautiful plant. Dark purple on all the leaves. Bud sites are really starting to come in now. Going be a nice yield. So happy to have gotten the purple pheno. Beyond thrilled. Currently she getting fed every 2 days about about a gal of water each time. I 4 grams of mega crop 2 gram of sweet candy 1 gram bud explosion Ppms at runoff using my Tds meter is 2250. I usually keep this high during early and mid flowering then towards then boost it up until I notice some burning then cut back with water. No issues at the moment everything seems to be growing fairly smoothly :). Another 4 weeks should be close to harvest ^_^
Likes
142
Share
Hi everyone 🤗. Everything is going great 👍. There are no defects or anything unusual :-). Today the Blue Cheese Pheno 1 became the first time rinsed, and now only gets 0.4 Ec water for the next 10 days ca :-). Everyone else needs a while. otherwise there is not much to report this week. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱
Likes
126
Share
You can find tbe first week of all girls on my profile, second week is missing coz its just boring and now i start week 3 so its day 15 today from placing seeds to germination. Uploaded a video of their habitat, i still wont name each one indifidually coz i still didnt choose winners / keepers. Unfortunatelly i have a bit low RH for this stage of growth but they obviously dont mind, i spray them twice a day, no burns from spraying with lights on, no electroshocks caused by spraying so all good now. I tried it all enough to be able to say i cant be assed anymore :D Since @growdiaries are not keen on resolving a problem with uploading each pic individually on androids, i will keep one diary for all girls, dont even mind not being able to compete in dom. Stay tuned these girls will rock.
Likes
4
Share
@Urunascar
Follow
Vienen muy lindas, por ahora solo estirandose sin formar mucho las preflores, al final de la semana que viene planeo hacer defoliacion y poda de bajos
Processing
Likes
24
Share
8/2 some parts of the plant look like they have enough pistils to consider her to be flowering 8/5 gave her some open sesame, since she's shooting out so many pistils 8/7 shes 66 inches and id say shes officially flowering
Processing
Likes
13
Share
Defoliated and fully leaf stripped. I am going all out to see what happens. Wedding gelato is a fairly tall plant for my tent and future grows will have to be properly trained and tied down. Live and learn. So far happy with the results from hydro grow. Roots have worked their way into the res so I have added an air bubbler to the submerged roots.
Processing
Likes
7
Share
@Mrg7667
Follow
Still looking a little bit phosphorus deficient on the girls, one of the. Big girls where not looking as good especially one, started introducing mammoth p and they seem to enjoy it and recovered!
Likes
7
Share
@ShotoCann
Follow
Getting closer to the end and it's showing. Upping the BioPK still a little bit. I think they'll be ready in a day or 10. A couple more rounds and I'll start flushing. Even though everybody keeps telling me flushing has been scientifically debunked, I dont really feel comfortable not doing it. Any comments on that from you guys?
Likes
21
Share
Hello Diary. We have reached the 9th week, 6 weeks of flowering and are slowly coming to an end. My estimate is another week until harvest, although the flowers look different on Mimosa # 1 and Mimosa # 2, the appearance of the trichome tells me it will soon be time to harvest. Most trichomes are milky and now I am waiting for the brown ones to start appearing. It’s a sign to me that it’s harvest time. Along with Mimosa, there is also a Sherbet Queen on the "Farm", so it's quite crowded in the grow-box. That's why it became quite difficult for me to take them out of the grow box so as not to damage them. So this week I only photographed Mimosa # 2 on a black background while I take photo of Mimosa # 1 inside the grow box. The color of the leaves slightly takes on a lighter green color which slowly becomes yellowish, the flowers are nicely filled as far as Mimosa # 2 is concerned, although it grew almost 120 cm high and the lower branches were quite far from the light. Bending clips helped a lot by throwing the branches outwards and thus giving them more light. The branches are heavy under the weight of the flowers so I had to tie it a bit to a stick. As for Mimosa # 1, the flowers are full of trichomes, the smell is divine, much stronger than in Mimosa # 2, but the flowers remained small and airy, not filling and hardening. Probably most of the flowers will go into the trim. Due to the height of the plants that are inside my 180 cm tall grow-box, the lights are much closer to the top of the plant than recommended by Migro, but I didn’t notice that their light is too strong, so bravo Migro. The temperature was high this week, around 30 degrees, and this is caused by the great heat outside which was above average this week. Humidity is a little above 50%, which is more than would be ideal, the cause is also heat, so the soil evaporates more and releases moisture. I have two fans that blow for 24 hours and thus prevent the potential occurrence of mold or similar problems. Ventilation also works at maximum power. Watering is still every two days, and more or less that’s all that happened this week, I’m patiently waiting for the harvest. Here is a brief overview of the week. 11/07/2021 - Day 57. Watering. I always prepare about 8 liters of water, p.H I adjusted to 6.4 and watered all three plants evenly. Temp / Humidity on the farm - 30 degrees and 50% humidity. 13/07/2021 - Day 59. Watering. Same procedure as two days earlier. Temp / Humidity on the farm - 31 degrees and 55% humidity. 15/07/2021 - Day 61. Watering. p.H - 6.2 Temp / Humidity on the farm - 30 degrees and 53% humidity. 17/07/2021 - Day 63. Watering and photography. Temp / Humidity on the farm - 30 degrees and 60% humidity. That’s it for this week, we’ll see more of what it will look like next week but it will very likely be harvesting all three plants at the same time. Until then, enjoy.
Likes
12
Share
@Donbehzad
Follow
I tried defoliating two days ago but just the leaves that are underneath and started to bend toward the soil, 1-2 leaves per plant not that serious defoliating because its an autoflower and I won’t stress it to much. I did another defoliating an hour ago, 1 leaf per plant again just those trap inside the bottom part. Low stress training still on going but no new tie, i’ll try to leave it like that until the end i’ll just tuck the leaves blocking the developing pistils. I noticed that out of 3 plants, 1 is taller and bushier than the rest. Looks like the other two stunned their growth or just slow in growth. Seriously I don’t have an idea same nutrient and care are given to all plants. I feed them twice a week every 3-4 days, no negative reactions or whatnot. Nutrients adjusted in this week. Same temperature and humidity level as last week, keeping an eye daily to adjust if its not in desire level.
Likes
16
Share
@DonKrika
Follow
No problems this week, plants growing extremely well. Unfortunately, I was not able to set up a drip system yet. The only training I did was to tuck the fan leaves a bit, next week I will start LST. I used a foliar spray this week in the days that I feed the plant. DAY 22 - Nutes PH - 6.04 Solution Temp - 20 PPM-1500 Watering Volume per plant - 3L DAY 25 - Water PH - 5.92 Solution Temp - 20 PPM-570 Watering Volume per plant - 4L Plant B is about 20cm Height and Plant A is about 22 cm Height.
Likes
7
Share
Buenos dias a todos. Es la primera vez que cultivo, en este caso es una Sour Compassion CBD. Esta planta fue un esqueje que me regaló un amigo. Cuando me lo dio estaba espigado en un vaso de plástico con 1 mes de vida. La pase a una maceta "Mad Rocket" de 16L. La hice vegetar 2 meses y luego la pase a florar el 8 de Marzo. Tuvo 111 días de vida y 71 días de floración. Con respecto a la fertilización que aparece, hace referencia a toda la vida de la planta. Saludos cannabicos
Likes
11
Share
FORBIDDEN 🚫 RUNTZ by FASTBUDS Week #17 Overall Week #1 Flower This week she's doing good after being transplanted and being moved outside she's flowering and really didn't show any signs of stress from transplant or being moved outside! Stay Growing!! Fastbuds FORBIDDEN 🚫 RUNTZ
Likes
10
Share
@Naujas
Follow
There are no photos for a few days, I was away on a short vacation :) when I returned, I immediately started working with her, I cut off the single leaves, and used a little LST, Overall, the girl looks really beautiful;) strong, thick branches, I think she will give really tasty buds :) It is an autoflower, but it is not blooming yet, I think it will start soon, all my auto strains that I have grown before, started really earlier, but it is not a problem for me, and maybe even + she will be bigger with bigger flowers :) good luck to everyone :).
Processing
Likes
20
Share
Start of week 3 of flowering for plants 2 & 3. They are showing signs of heat stress, three days last week temps in the grow room reach 35°c. Aside from some heat stress, the plants still look healthy and the bud sites are developing nicely. Light defoliation of each plant, removing the dying leaves and some of the ones showing signs of dying.
Likes
57
Share
Seedsman Auto Lemon is the 4th round of seeds started in my perpetual garden of auto flowers. So far this plant is growing strong. I expect it to start stretching this week. I also decided to try topping this girl today and will probably bend her next week. Growing in organic composted 'super soil', no additional nutrients added yet. Also as you can see in the pictures there is a 26w CFL (100w equivalent) about 6 inches away - this also helps provide some side lighting to the older plants. Setup: 24x48x72 grow tent 1 Viparspectra V300 300w LED fixture 1 Viparspectra R300 300w LED fixture 1 CFL 100w (26w actual) 4” exhaust fan w/carbon filter 190cfm 6” clip on fan Electric oil filled radiator behind air intake
Likes
104
Share
Last week I thought that the 50cm distance between the light and the top of the canopy was ok. But this week, I get some signs of light burns on every plants and I decided to put it back to 60cm. This distance seems to work best for this grow. I think the Cashew Kush shows some slight signs of nitrogen deficiency so I added a bit of BioGrow (1ml/l) and hope it will help. For more info about the "Soil people", see week 9. As part of the "Tent-X Ultimate Grow Challenge" contest, I received a free Tent-X controller, a MBS-TH Humidity/temperature/light sensor and a LMA-14 light control adapter. I requested them on sunday and get them on thursday so it was super fast, thank you @TrolMaster_Europe ! 👌 ------------------------------- Controller + MBS-TH review ------------------------------- The Tent-X controller combined with the MBS-TH sensor provides information about temperature and humidity. The light detector of this sensor is used to trigger the day/night mode of the Tent-X controller but doesn't measure light intensity (you need another sensor for that). I've tried to connect the controller to the phone app and it seemed to work. I will not use this function because it requires to connect the controller to the internet with an Ethernet cable and I don't have an Ethernet plug in my grow room. I set-up a rudimentary fixation system to hang the controller and the sensor since I'm not growing in a tent, but it works haha. Now, I can make my measurement in the center of the canopy instead of making them just above the ground. ---------------------------------------- LMA-14 light control adapter review ---------------------------------------- This adapter allows you to control your light via a RJ45 cable. I'm not using it because my light and my fan are synchronized and my fan cannot be controled by a RJ45 cable. I don't want to have a timer for the fan and a controller for the light. I just use the timer for both. However, Trolmaster sells some plug sockets that can be controled by RJ45 cable so you can control everything with your Tent-X controller.
Likes
9
Share
@Pussodog
Follow
Ho lasciato da sole le mie bambine per quattro giorni confidando nella gestione automatica di temperatura e umidità. E andato tutto bene. Al mio ritorno mi sono occupato di defogliare a sufficienza e sono felice. Ovviamente i bassi valori dei nutrienti servono a riportare il livello di EC a 2 Ms/s. BONUM CULTURA!