Week 2. Just the normal stretch. Nothing eventful. After this week, I'll be giving random weekly updates due to my busy schedule.

Started her, second set of leaves.I predict this 1 will take over the AK x BD in 2 to 3 weeks if shes anything like the other sensi/white label strains I've done b4.Started in coco in my small cabinet then transplanted to hydro after first set of leaves.All good 👌🤞🍁

During the harvest I've collected lot of trims. I think this genetic will be great for extractions. I've dried all the buds in the tent at 50%rh, 23°C with indirect ventilation for three weeks. Now are curing in a dark room at 21°C inside a jar with a 58% Boveda. Thanks to everyone who followed and liked this diary! I hope you enjoyed 🙏

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the Update 😃. Flowering day 56 since the time change to 12/12 h. Hi everyone :-) The day before yesterday was rinsed ☺️. The next 5-10 days will be harvested as the trichomes are 80% milky and 20% amber. Of course, as always, before the harvest update comes a normal update 👍. As always, the tent was cleaned this week and all containers refilled. Stay healthy 🙏🏻👍 You can buy this Strain at : https://www.exoticseed.eu/ Type: Quick Sherbet ☝️🏼 Genetics: 75% Indica / 25% Sativa Sunset Sherbet X Black Lemon 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8

First week of flower started with a bit downs :/ leaves were hanging and I didn’t know why but some guys helped me here ❤️ changed the watering habit now. Started watering with feeding when pots were dry/light and watered until I got 5-10% runoff - next watering when pots are dry/light

This week was half veg half bloom. I may have to find a new home soon so I've decided to flip all my plants into flowering by the middle of week 08. This lovely AK-420 is the smallest plant in the room, but probably the cutest. Her tight nodes are ready to explode with flowers and her stalks, hidden beyond large leaves, are strong enough to support heavy buds. She had a slight Calcium deficiency that was treated immediately and the recovery was quick. I'm confident she will become a nice bush. She no longer has the canopy ring, in order to "let her breath" and grow vertically. Wait & see! 😎

Memes for the fastbuds meme contest Memes for the fastbuds meme contest Memes for the fastbuds meme contest Memes for the fastbuds meme contest

For the most part the Clones seem to be doing very well. I did lose three clones that did not take. I can only assume it was because of using Earth dust. When I initially made the Clones the Earth does micro fungi formed a tight layer in a medium so I could not push the Clones in to be planted. I had to use a probe in order to make a pilot hole to plant the Clones. I'm assuming that there was too much of a distance between in the pilot hole for the stem of the Clone to take root, So they died. This is the first and last time I will ever used Earth dust for clones. I normally use a Coco soil mix. That's all for now.. Hope everyone is doing well! Cheers!

Hey now, I hope everyone is having a great week. It was a good week again for the 5 mainlines, I did some final LST to try and keep the mains level, and I also defoliated the lower leaves to improve the air flow. I am still feeding the same veg nutrients which is just amor si, cal mag, and maxi grow. I will start transitioning to flower nutrients tomorrow and I will gradually switch over to all over flower nutrients by the end of the week. The ladies are about 24" inches tall, but I do anticipate them growing some more before the stretch ends. I am pretty much done with LST at this point, I will just continue to defoliate as necessary and make sure they are enjoying their environment. Still very happy with the Spectrum X from Medic Grow. I am running her at 69% and the plants seem very happy and healthy. The heat and humidity are finally letting up in my region so it is nice to be able to open some windows and drop the temp outside the grow tent. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

All jarred up. This stuff is amazing tasting. Super smooth and tastes like real strawberry. 10 out of 10 fastbuds nailed this one.

Venga familia que ya viene la cosecha de estas Runtz de ZamnesiaSeeds, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte de prietas se ven bien resinosas. a sido una genética con la que disfruté bastante cultivarla, no es a mi parecer complicada cultivarla y merece la pena si eres cultivador con o sin experiencia que busque sabores exóticos de genéticas calis Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí es todo

I feed and raise light.. nothing more. Still a zero effort grow.

Easy harvest not a terrible amount of leaves. Drying can be difficult at times depending on weather conditions due to the density of the buds, watch close. Dry went well

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Starting to show signs of some sort of problem.. might be Porassium.. uff

420Fastbuds GelatoAuto Week8 What up grow fam weekly update on these 3 gorgeous girls. Getting super hot in my tent as summer time is here. Over all besides some crispy leaf tips and having to water more frequently all is good.

Week 2 Light cycle=20/4 Light Power=73w 30% Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 70% Low Rh= % Rh step=0% Speed max=5 Speed min=1 Smart controller settings (during lights on). Lights on= 02.00am Radiator on= below 9c Radiator off= above 20c Humidifier on= below 64% Humidifier off= above 67% Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 16c Radiator off= above 18c Humidifier on= not in use Humidifier off= not in use Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.4-0.8 DLI aim=15-18 EC aim=0.4 PH aim=6.2 Friday 29/12/23 #1 (Day 8) 📋 Started on its 3rd set of true leaves, she is doing fine. Saturday 30/12/23 #1 (Day 9) 📋 Looks fine. Was H=9cm D=76cm DLI=18.2 Now H=9cm D=69cm DLI=17.6 10.00pm Switch to 20/4 Light power was=86w=36% Light power still=86w=36% Lowered light by 7cm. Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 68% Low Rh= % Rh step=0% Speed max=5 Speed min=1 Smart controller settings (during lights on). Lights on=20/4 (04.00am) Radiator on= below 19c Radiator off= above 20c Humidifier on= below 62% Humidifier off= above 65% Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=20/4 (00.00am) Radiator on= below 16c Radiator off= above18c Humidifier on= not in use Humidifier off= not in use Dehumidifier on= not in use Dehumidifier off= not in use Sunday 31/12/23 (New year's eve) #1 (Day 10) 📋 wet the soil. Monday 1/1/24 (New year's day) #1 (Day 11) 📋 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Neutralise=0.1ml/L Roots=5ml/L Feed=nutes Volume=200ml Easy Ph down=0 drops/L Ec=0.27PH=6.1/6.2 Time=9.00pm Runoff. Total runoff=40ml Ec=2.5 PH=5.7 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Tuesday 2/1/24 #1 (Day 12) 📋 Humidifier didn't come on autopilot. Wednesday 3/1/24 #1 (Day 13) 📋 ✂️ Topped after the 3rd set of leaves (5 fingered). Removed lower leaves and nodes (single fingered). Thur 4/1/24 #1 (Day 14) 📋 Tomorrow will be the 1st day of 18/6 so altered the light at 10.00pm Light power was 86w 36% Light power now 120w 50% Was H=11cm D=66cm DLI=18.5 Now H=11cm D=66cm DLI=21.5 She is recovering from yesterday's topping but other then that she has grown champion so far and looked really healthy. At the moment I'm just going with 4 colas, I may top more further into the grow. Back soon. Take it easy.

“The Wock” 7 Weeks🤙🏾 Ladies are crushing its! I’ve for sure found 2 phenols I want to keep going based on structure and growth. The first was actually going to be a throw away. I didn’t like how lanky she was in her solocup stage. I instead topped her to slow down lateral grown and threw her in a 2 gallon bag to do her thing. She is now in a 7 gallon bag and has the best structure of them alll IMO. My 2nd pheno is a Tri-leaf mutation and it throws tops like no other! The perfect mother plant and is why I chose her as pheno #2. The 2 plants that were topped at the 5th node are bushing out more and more, just like it like it. There are 2 natural growing plants are doing great as well. They have nice bushing with one main cola. All plants will be defoliated 5 days before flip. The nose coming from these ladies is LOUD and I mean LOUD! Sour Candy and Burt Fuel! I’ll be taking cuts and flipping these ladies soon! Happy Growing PSGX Family! 🚀PSGX to the 🌕 #Phant0m