2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.

💩Holy Crap Growmies , we are outdoors and in the Ground and there Doing Great💩 👉It's been another full week 56 days from seed and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍And she's now in full on flowering 😁👈 the weather been great as of late and shes getting perky 😎 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈

Put in new tent plus 1 more 65 watt led.light :))))

We are hitting week 4 now! Plant looks strong, has a nice green look overall and she seems to like her new home! I give her every 4 days ph regulated water. 1liter from the bottom, about 1,5l from above. I will give the plant another week unter the trellis to make sure the side branches catch up. Week 4 was pretty straightforward, holding the branches under the trellis and cutting some fan leafs that giving shadow to the lower branches. At end of week 4 there are first signs of flowering and she gets thirstier over the week. Giving her about 1L from bottom and 1,5L from above every two days at the moment. At first sign of flowering I have turned the led to 100% (100W) I’m really happy with my first try in coco, the plant looks healthy with a nice green color overall. I’m using ph regulated water between 6-6,3 with biobizz nutrients.

well my girl is in her final days. My scope is broken so I need some insight, her flowers look so ripe, this update had to be for tomorrow but she looks so good don't want to get an over ripe bud need her to be perfect✂️✂️✂️✂️✂️✂️✂️✂️✂️✂️🔍🔍🔍

10/29/20-Day 23 #1) 4.5” tall, nice looking 4th set of leaves. #2) 5.75” tall. All new growth, including lower axillary buds, is yellowing. Green tint toward tips, brown/copper spots on 3rd set of leaves. #2 is taller because is lacks chlorophyll and is stretching to get more light. 10/31/20-Day 25 - watered 300ml each 11/2/20-Day 27 started LST on #1.

It is slowly coming together for a flower flip 🙏. This is my first photo period grow and I feel that I have learned so much during this grow when it comes to topping, lst, lollipopping and defoliation. Thank you Youtube for that. I am so happy with my 10 main colas now. I will flip to flower (12/12) the 29 th of December.

Raspberry Ripple Number One and Two (Flowering Plants) This week is the final week of Flower, I am noticing milky coverage on both plants and some amber trichomes as well. I gave the last watering today of distilled, dechlorinated water, with no P.H. Adjustments at 7.2 PH. I plan to harvest April 11th. Number One Pheno- The Number One Pheno is fully swollen and ripe now. The colas are densely stacked on the canopy. The foliage is quite over-faded, with some leaves being so dried out they crumble to the touch. I don't know if this is because the plant was in a bit too small of a pot or if my light was a little much these final weeks of flower. It is definitely ready for harvest! It's smells are still heavy in the raspberry candy department, with those hints of earthy leather on the back swing. Giving the number one pheno a very unique musk. The resin is greasy and plentiful! I can't wait to take this one down and trim it up to see how it looks in a jar! Number Two Pheno- The Number Two Pheno held out a little longer in its 5 gallon pot, it's a bit smaller of a plant. It's about 65% faded now but it's trichomes look finished! It's trichomes are very stacked out and coat this plant in a snow film! It may look a little boring next to its sister color wise, but it still sports some purple and pink hues under all the frost and I still think it'll be a worthy smoke as well! It smells of a raspberry wine but with that hazy fruity power. Almost like a strong mimosa strain. Clones- The larger clones in the 55 inch 2x2 MarsHydro veg tent, were starting to drink through water quickly! Mostly the larger number one phenos. Which would consume the entire dryback of their full pots in one day. I transplanted all the plants in the 55 inch tent into square pots (2 gallons for the Number 2 Phenos, 3 gallons for the Number 1 Phenos) this should hold them over for 3 to 4 weeks, so I can harvest and dry my flowering plants. I was unable to transplant the clones in the smaller Mars Hydro 30 inch Clone Tent, due to space constraints. I'll be feeding them worm castings and Down to Earth Crab Meal tomorrow. All the clones are looking healthy and look like they would be great candidates for flowering or mother plants. Tech Upgrade- This week I was able to purchase a Photobio Phantom Par Meter at a local grow shop's going out of business sale. With this tool I'll be able to get a dead on map of my light intensity and adjust accordingly. This will be great to have when setting up my new HLG Blackbird next cycle. I also got some 15 gallon grass roots fabric pots to try in the flower room next cycle. I also reached out to AC infinity and have an upgraded Cloudray S6 Gen 2 Oscillating Clip Fan on the way. My Gen 1 fan broke and would no longer oscillate correctly. AC infinity replaced it free of charge with the latest model. I think that about sums up this week! I'm very excited to take these plants down and begin preparing for next cycle. I was extremely lucky to get such amazing results of my first Pheno hunt. I can't thank Mosca Seeds and Tiki Madman enough for selecting such great crosses. It's hard to believe I got these two seeds as a freebie pack, with another order. I'm super thankful to have Grow Diaries to use and rely on for charting my week to week data, questions I have, and comparing my findings and results to other growers with similar strains, like @THCpapa grow of Raspberry Boogie! Thank you for checking out this week's entry of my growdiaries! See you for the harvest! -Starfish

Ok

This grow was pretty simple ! They went a total of 103 days from seed! Very trichomy dense buds with the smell of Berries vanilla and skunk ! This is a must try for you all Fastbuds has the greats!!!

In this week, everything is fine and she is really grow. I fed her nutrients at Day 15 but I made a mistake that’s forgot to change Rapid Start ratio 😁. I added CO2 bag to my tent at her 19 day but her new leaves seem to be curling next day.Actually, she is ill 🤒. At her 21 day, I flushed grow medium with 5.8 ph water and fed Cal - Mag and nutrients with 539 ppm.

The number of points on a cannabis leaf is primarily influenced by genetics, the plant's maturity, and environmental factors. Grape Guava is an Indica Hybrid. Hmmmm Genetics: The plant's genetics are the most important factor in determining the potential number of leaflets. Sativa-dominant strains are more likely to develop leaves with a high number of leaflets, sometimes producing 13 or more. In contrast, indica strains typically have fewer, broader leaflets, usually between 5 and 9. Maturity: A cannabis plant's leaves gain more leaflets as it matures. Seedling stage: The first true leaves after the initial cotyledons emerge with a single leaflet, followed by sets with 3, then 5. Vegetative growth: Healthy, mature plants will consistently produce leaves with 7 to 9 leaflets, though 11 or 13 is possible. Fast growth: A mature plant growing quickly in ideal conditions with plenty of light and proper nutrients is more likely to show a higher number of leaflets. Environmental conditions: Optimal growing conditions can push a plant to express its genetic potential for more leaflets. High light: A fast-growing plant with ample light is more likely to develop leaves with 9, 11, or 13 leaflets. Stress: Environmental stresses, such as unusual lighting schedules, can sometimes cause mature plants to produce leaves with fewer leaflets than normal. Blue light causes stomata, the pores on plant leaves, to open by activating a signaling pathway within the guard cells. This process involves phototropin photoreceptors, which initiate plasma membrane H+-ATPase activation, pumping protons out of the cells. This creates an electrical potential that drives potassium (K+) uptake, causing guard cells to swell and the stomatal pore to open, allowing gas exchange. Foliars applied in strong blue 430nm with 4000hz tone. 20min dose prior to application. In essence, you're seeing a combination of the infrared light reflected by the plant, which the camera perceives as red, and any residual visible blue light the plant reflects, which results in a purple hue. DISCLAIMER 01: All ideas expressed on this diary are for entertainment and general information purposes only. There is no advice on what an individual should or should not do. Any response made by anyone after hearing this communication is their interpretation and is their responsibility. Ideas expressed by this diary should not be treated as a substitute for medical advice or professional help. If expert assistance or counselling is needed, the services of a competent professional should be sought. DISCLAIMER 02: All materials in this video is used for entertainment purposes and fall within the guidelines of fair use. No copyright infringement intended. DISCLAIMER 03: This website/diary is not officially affiliated with Alan Watts or his estate. The content presented is inspired by Alan Watts' teachings and philosophy, shared with the intent to motivate, inspire, and support personal growth. The voice used is a synthesized voice and does not belong to Alan Watts. The goal is to respectfully share his timeless insights in an inspiring way, with no intention to deceive or misrepresent. All opinions and interpretations expressed are solely those of the creator and do not represent the official views of Alan Watts or his family. For a deeper understanding of his work, please refer to his original writings and recordings. You can explore more of Alan’s work here: 📚 alanwatts.org

Iv started my 9 beans out in jiffy pallets on the 29th of march so we are 2 days in and they are already starting to pop out! I have 1 of each making way through the top layer of Coco in the pallet.

————————————————————— WEEK 5 / DAY 29-36 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L Plant bag made of fleece Light: 55cm / 55%; Schedule: 24/0; PPFD: 650 umol/m2/s 20° C - 70 RH 500ml per Plant PH 6,5-7 2ml BioGrow; 0ml TopMax ; 0ml BioBloom 2ml CalMag #1 Blueberry Automatic #2 Blueberry Automatic Fan, extractor and pump ON 24/0. ————————————————————— -17.02.2025 The fourth week of vegetation begins. The plants are looking very good so far and I'm happy with the grow so far. There have been no significant complications so far. The lowest few leaves have been removed and light LST applied using plastic benders. -19.02.2025 The plants get their typical “white hairs”, pre-flowering has started. -23.02.2025 The plants are doing well, I haven't been able to look after them for the last few days. But they have survived. The fourth week of vegetation is coming to an end and as you can see the plants are starting to flower.

--------------- Start week 3 -------------- We started week 3 as we ended week 2, which is great. She continues strongly at the beginning of this week and seems almost unstoppable. She clearly enjoys her surroundings and looks very healthy. She has started preflowering and seems to be gearing up for another explosion in growth. She is very good at leaftucking and has already developed a good number of shoots. On to more! A new update at the end of this week. ----------------- Update Week 3: ----------------- End of another fantastic week for MBAP. This week was all about pre-flowering and you can see that she is preparing for an explosive bloom. She has benefited enormously from the LST that I applied and has a good number of shoots ready to explode during flowering. In addition to leaftucking, have also removed the lower shoots so that she can concentrate her energy on the upper shoots. I also did the biotabs in the ground in the middle of the week. We have opted for 3 biotabs in 20-25l soil. Have waited several weeks before putting the tabs in the ground because we work here with aitoflowers. And they prefer a light feeding regiment for the first few weeks. We are going to gradually lower the humidity and get ready for flowering and week 4! Until next update

Grow nice , drink a lot 🔥🍁🔥 Already day 39 , I transplanted her into a larger pot on day 35, she got caught, and she looks deviantly nicer

Day fifty, they're all looking pretty good.I'm doing a ph check every couple days

I have to leave the plants ti My grigri rend cause i’ve to go. I ll be back in july. Let’s see

Day 24 of Bloom! Stretch is done and flowers are forming fast! Happy with everything thus far. No issues :) VPD: 1.25 -1.35 EC 2.5 PH: 5.9-6.1

in the previous weeks i did too much defoliation. error !! ❌❌ I don't know where my head was ahahah 🤯🤯