Recommended
Likes
Comments
Share
This week has been great, ive been struggling with learning how to water the living soil, only using 0.5% of the 5 gallons pot so a little under a liter. But i cant tell of i need to give her more emmm! Used the organic bloom booster they seemed to like that! Taking things slow learning as we goo im super excited about this strain even tho shes been hard for me! I got these little 6 inch stands to put under the pots so they are not getting cold on concrete and the soil stays warm! Soil is about 70 degrees and about 6.30 ph
Likes
6
Share
Empezamos nuestro Seguimiento através de Aptus, esta le daremos 3 meses de crecimiento en una maceta de 20L y luego pasaremos a florecer en Invierno. Intentaremos sacar el Máximo rendimiento con las macetas de tela, junto algunas Bacterias para dar vidilla a la cosa Farmers buenos humos!🍁
Processing
Likes
20
Share
Started doing some light defoliation a bit each day on the very low level offshoots and any big leafs blocking main bud sights. Looking back I should have done a bit more earlier on as these are very heavy and leafy plants. At the start of the week my light was at 55%, on 13 Nov I put it to 100% to see how they react. I will monitor to see if they are ready for it but they really took off this last week. My one plant in the back left always appears droopy compared to the others because the leafs on it are so big it weighs down the whole plant. The plant in the back right was always janky and I considered not even growing it. The seed came through a few days later than the rest and I almost wrote it off. Figured I would use it as an experiment and try and learn from it instead.
Likes
4
Share
this week we racked from 1l to 11l pot and went under hid agro 400w. follow next week for the first high stress we will do💪💪💪
Likes
12
Share
@MaxMo8
Follow
I will be careful every time I encounter an insect problem and use an insecticide, I will eventually get rid of it with a water care method
Likes
31
Share
@Chucky324
Follow
Hello. Got the plants into the main grow room. There is 2 videos . In the first I just sit in the room quitly and turn the camera. you get a sense :) of what it's like in there. In the second I try to describe what's in the room, equipment and maybe a new technique. With the tomato cages I use, and needing the plant to slow down, I twist the stock into a large figure 8. Eventually I take off what is on the lower part of the 8, and just work the top of the 8. About 2 weeks in veg in this room. Then I take clones of everything before I switch to flower. >Carbon dioxide enhancement: I had to make that choice 20 years ago. I could, rent a tank and have my name on a list, at the gas store. Or make my own. They didn't have the small propane tanks like they do today for the blue flame you get when you burn it. I decided on a kerosene lamp burning down as low as it could be without going out. It makes a half blue and half yellow flame. I vent constantly so the small amount of carbon monoxide is not a problem. For the first week you can smell it a bit, but the smell disappears after that. I light the lamp in the morning and put it out at lights out (unless it's bed time). It needs to be put in a place in the room that cant get knocked over (pets, children, ?). I try to use extra attention whenever I use it. It can burn down the place. Be careful Please. >About 17 years ago I thought I'd lower my table by knocking a hole in the cement and dropping my 10 gallon reservoir more. I was able to lower it by 16 inches. Still have to watch the height of some plants though, it worked out well. Watch the video. > Air cleaner: The reason I got a big 8 inch exhaust fan was, I had a bout of powder mildew and needed better a exhaust system. When I plugged it in there was too much air moving. I phoned and asked and the salesman said that a dimmer switch wasn't a good idea. I put one on anyway. Works great. I have the fan barely on in the winter and about half way on in the middle of the summer. I haven't had any powdery mildew since. About 12 years ago I bought a good air cleaner. An ORECK, It has electrified plates that zap any organic particle or spore that come between the plates. Use to grow a Northern Lights that got 6 to 8 ounces per harvest, it grew big buds. Buds as big as my forearm. I had problems with gray mold attaching the buds. But none since I bought the air cleaner. Ya learn as you go.
Processing
Likes
20
Share
Buenas noches familia, aquí ando fumando un plajo, actualizando esta farm cheese que no veáis cómo empieza a oler, bastante sana, acepta muy bien la alimentación , un fallo podría ser que me pidieron agua y hasta el día siguiente nanai, pero nada serio. Ph controlado en 6.2 la temperatura no sube nunca de 26 grados con el led de mars hydro y la humedad se mantiene por debajo de 50%. Todo va muy bien. Poco más que decir estoy deseando que pasen las semanas para cosechar, buenos humos fumetillas.
Likes
7
Share
december 20th gave her half a gallon of dechlorinated tap water phd to 6.6 with 1/2 tsp of bloom nutes to each 3 gallons of water. runoff tested at 6.3 ph. she was showing a few deficiencies
Likes
2
Share
@Aleks555
Follow
Everything is going great! On the 48th day of vegetation, we switched the light cycle to 12/12, and for the second week now, our beautiful Golden Sands - 1 has started flowering. She’s been growing rapidly and noticeably increasing in height. We continue to feed her with fertilizers from Xpert Nutrients, and the results are impressive. A huge thank you to Xpert Nutrients for their high-quality fertilizer, which is not only effective but also very easy to use. With such a reliable product, we’re confident that everything will turn out perfectly!
Likes
86
Share
Hello Growmies 😎😎 This week I start giving the plants a light dose of nutrients. hopefully I can start with LST soon 😃💥 Thanks for stopping by friends, enjoy the week 🌱💚 Buy Mars Hydro FC 3000 https://marshydro.eu/products/mars-hydro-fc-3000-led-grow-light/ save some money with discount code: PremiumBudsEU
Likes
10
Share
Entering week 10 this girl is looking pretty! Smaller buds but great trichrome production, smells great, and looks like another good week. Harvest is close but still a good week or so to finish. I pollinated a branch of my other autoflower, but with this one I just did a couple small flower sites. All growing good Will leave then on to let the seeds finish if need be, will be close as this girl is finishing quicker then the other.
Likes
31
Share
@Dunk_Junk
Follow
Wow she over doubled her height and grew 53cm this week !!!!!!!!!!!!!!!!!!!!!!!!!!!!! I'm kinda liking these genetics.......
Likes
27
Share
13th august Still no flower, Hollowed out a bit more to max airflow and reduce popcorn
Likes
33
Share
@Ema26
Follow
Day 92: what’s happening guys! Week 14 is here. Temps have been okay and humidity has been okay. I’ve got the 400w hps set up and it’s dropped temps slightly and slightly raised humidity which is what I wanted. In my opinion she’s looking ready for the chop! I’m seeing plenty of cloudy trichomes and a few ambers and I’m going for less of a couch lock so I’m thinking around now she is ready. I started plain water 6 days ago and she’s recieved 2L,1L and then 1L again today. All leaves have started yellowing, I imagine this is the plant pulling the nitrogen from the leaves as there’s none at the roots. How much longer does she need to be fed plain water for before she is ready for the chop? Thanks! Stay safe and happy growing✌️🌱🍁 End of the day edit: I decided to harvest the majority of her. The bottoms just a bit under developed so I’ll leave it going a bit longer. After chopping and taking photos out of the hps light the nugs are looking a tinge purple although I can’t see it as strong with my eyes. Hopefully I’ll get a wet weight later so I can add it to the diary later on. Temp is around 24c and humidity is 45-55. How does that sound? I’ve got extractor at the top and a fan at the bottom. We’ll see how long it takes to dry, hoping to go for atleast 5 days. With the virus going around I’m really making use of what I have at home so hopefully the climate will hold up🤞 any tips and advice about drying and curing etc is hugely appreciated🙏 I’ll be back with the harvest update once she’s dried out✌️many thanks happy growing!🍁🌱 She weighed in wet at 110 grams. Any ideas what she’ll weigh dry? I’m guessing an ounce if I’m lucky.
Likes
29
Share
No problems. 👋Good I like her style. In maybe 1-2 weeks she becomes another place in my tent. If its free. Yes a big big tent.... 0,36 m². OK not so big, but hey, its still illegal in my land. And with such a small tent l=small yield im not in the heavy criminal scene. But sry law. Since the first time I smelled weed, not smoked, I knew. THIS IS IT! 24.09. 😛 💪 Nice girl.
Likes
20
Share
All looking frosty around day 42 of flower! Just been on water for the whole of flower! Watered with aact as well every other week but real happy with this run!
Likes
16
Share
@GRow_M8s
Follow
- Day 62 and the 4 of the mephs are with some amber crystals already ( Stomper#1,#2 & GWK#1,#2), - Stomper #3 (D62) and SODK (D57) are a few weeks behind. - Stomper and GWK produced a light>medium bud structure (tap water only🚿) with full of crystals 💎 (pretty cool for an auto with little effort), not yielders (soil organic) thought but with buds to make diamond rings. - SODK looking more like a yielder from these 3 strains with more compact buds and indica structure. - Humidity a little higher than the optimum this week, except Stomper#3 & SODK we didn't water the plants too much and we had some dry periods in the medium. - Made a final defoliation before harvest (4), we will dry the buds in a dry machine (as the Root66 dairy 👀) and make the rest trimming before curing. 🔕 Smells were super stealth until now, no problem at all and the buds looking and smelling dense when touching and checking them. ⚠️ Next update --> next week with the first part of the meph harvest 🤯.
Likes
16
Share