Likes
Comments
Share
@Jsammy09
Follow
Hello, Hello! This week has been another pretty solid week. Kind of continuing where we left off from last week. Just continuing to monitor the grow room conditions and make adjustments as need, though its been super solid and not a lot has been needed. I did lower the power of my light back down to 50%, some of my leaves were starting to taco and I came to the conclusion it was due to some of the branches being closer to the lights, but other than that no real issues. I did up the EC by .1 this week so now we are running at 1.0 EC and 5.9-6.1ph. These ladies are really starting to pack on the weight and trichomes this week and looking forward to see the changes over the next week or so! Temps have been pretty stable around 77-78f and around 50-55RH. I did do another round of light defoliation on the day of water change, but nothing too crazy. Getting excited to see these girls finish! As always, any tips, comments, or recommendations are greatly welcomed and appreciated. Thanks everyone, you guys rock!
Likes
30
Share
Week has been going well. Had a really bad underwatering while I was unable to look after the plant, which stunted it for a few days sadly. Started to LST her as u can see on the video But other than that, its looking good and growing fine
Processing
Likes
13
Share
July 19: Hi guys and girls, that past has been an interesting week. I have already collected a Cream Cookies and a Zkittlez from the 420 FastBuds and can report the first report in the C.C.C. The other plants grow strong and others are almost ready to be harvested. For example, the Zkittlez that has completed its flowering under the LED lamp is already receiving only water like a second cream Cookies. I must say that comparing the plants grown and flowered under the HPS lamp and the LED lamp I don't find many differences, both plants have produced very dense and resinous buds. As you can also read in my journal C.C.C. both the Cream Cookies and the Zkittlez become part of my favorite varieties 😉 In the pictures you can see how the LSD-25 is a real purple variety. At his side is the Purple Glam Kush from BulkSeeds, which has nothing in purple except the name, but which is producing a considerable amount of buds with the latter plant. Back on the LSD-25 I have to admit that it is really beautiful and the photos don't do it justice. In the future I will make better ones. The Lemon AK and the Six Shooter have grown considerably in height and for this reason I have practiced the FIM with other smaller plants. July 24: This week I tried for the first time to make a resin extract using the BHO system, although instead of Butane I used Dimetyl Ether, a gas made for this kind of extractions made by Daxso. For many years I have used waste to make good hashish using the ice-olator method (water ice and sieves) and recently I also bought a bubbler machine because I am lazy 😆 In recent months, however, I have seen many videos on Youtube of people who made high quality resins with the BHO system and I decided to try. I purchased and used a 50 cm extractor, but I've already bought another one smaller than 30 cm that I want to fill with just buds. I made my first excerpt and could follow the steps in the video I uploaded. Unfortunately to smoke I will have to wait until next week when my new Focus V Card V2 arrives, but as soon as I get there I will keep you updated 😋
Likes
29
Share
Ladies and gentlemen, here we are closing up week 4 of flower and I am so surprised at the size and beauty of these buds. The fan leaves are so small half of them are upside down, so it's crazy to me how it's able to photosynthesize the way it does with what it has to work with... I highly recommend this gross. She smells wonderful, very unique, but in a very good way, and as you can tell from the pictures, the buds are gonna be gorgeous beause you literally don't even have to do anything to them... easiest grow ever from seed to smoke .. hope everyone is doing well.God bless and have you growing 🙏
Likes
13
Share
@Luv2Grow
Follow
This strain took really well to LST and didn’t seem fazed by the training at all. She did become a really heavy drinker about two weeks or so into flower and she definitely seemed to want more nutes than usual. I believe I’ve got two more seeds so will be running this one again if the smoke is worth it.
Likes
22
Share
Die erste Woche ist gut überstanden. Alles i.O. Noch ohne Düngung. Da die Erde leicht vorgedüngt ist, nur Wasser aus der Leitung.
Likes
48
Share
[Day 47] 08/13/21 - It's hard to believe these are all the same strain. Looks like 4 phenotypes at play. They all have differences in growth type, smell and size. #4 has zero trichomes so far and not the most pleasant scent. The others have a very pleasant smell with subtle differences between them.
Likes
57
Share
@nonick123
Follow
Día 20 (13/05) Todas las plantas muestran las preflores! Auto Northern Dragon Fuel by @supersativaseedclub_official no parece estar muy contenta con los nutrientes disponibles Tiene algún problema que se me escapa, o es mucho más demandante que sus compañeras de ciclo que se muestran un crecimiento muy sano Vamos a ver después del riego de ayer con nutrientes liquidos como se comporta! Día 21 (14/05) Auto Northern Dragon Fuel presenta clorosis intervenal y peor estado general... Baño de sol de 2 horas! Día 22 (15/05 El gran @Thecannalife420 me diagnostica deficiencia de Mg Aplico foliarmente Sales de Epson Día 23 (16/05) Las plantas han reaccionado muy bien a las sales de Epson! Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 Día 24 (17/05) Las plantas salen al exterior! 😍 Les aplico heno como mulch (acolchado) Día 25 (18/05) Riego 250 ml solo agua todas las plantas Día 26 (19/05) Riego 250 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
92
Share
🌸 Week 3 Flower – Growing Strong, Tall, and Vibrant! 🌱 Hey Grow Fam! It’s already Week 3 in flower, and I’m thrilled to bring you this update because these plants are doing phenomenally well! Some are stretching up so tall that I might have to get creative in the coming weeks! Fruit production is well underway, and it’s absolutely amazing to watch the canopy fill out as these girls reach their potential. Aptus Holland Pack Unboxing & New Additions This week kicked off with a big arrival: the Aptus Holland nutrient pack! 🙌 I couldn’t wait to share the unboxing with you all; there’s a video up where I go through all the goodies, so check it out if you haven’t yet! Between the photos and videos, you’ll be able to see just how well these nutrients are already feeding these green beauties. Having a blast sharing more content lately—I’m in the zone with editing and creating, so get ready for even more shares! 🌡️ Environmental Control and Fine-Tuning the Reservoir pH Temps this week have been holding around 27.2°C with RH at 65.2% and CO2 at 800 ppm, creating a VPD of 1.26 for ideal flower development. The lighting intensity is at 833 PPFD, and the solution in the reservoir is fine-tuned to a pH of 6.22, EC of 475, with a temp of 21.8°C. Let’s talk pH in the reservoir: it’s a dynamic process, and I’m constantly adjusting it to keep everything at the right level. The pH tends to rise throughout the week, and each day, I work it back down, fine-tuning it to keep those plants happy and balanced. Managing pH is truly a hands-on job, and it’s worth every moment. I love staying on top of it for optimal nutrient uptake—it’s all about consistent effort and keeping that perfect range dialed in. Leaf Maintenance & Selective Defoliation These leaves are HUGE and gorgeous, creating a lush canopy that’s nearly too perfect! I’ve been taking a few leaves here and there, focusing on leaves that may be blocking light from reaching lower parts of the plant. Selective defoliation at this stage is key because it opens up airflow and allows light to penetrate deep, boosting energy distribution across the whole plant. Big, healthy leaves mean we’re getting excellent photosynthesis, but a gentle, strategic defoliation can guide that energy toward those developing buds. Leaf removal is all about balance, giving the plant space to breathe and thrive while still maximizing growth in flower! 🌐 TrolMaster + App – Real-Time Precision Huge shoutout to the TrolMaster system and the app—keeping everything in sync and at peak performance is honestly effortless with this ecosystem. The app provides a full overview of each environmental parameter, allowing me to make real-time adjustments as needed and track trends over time. The precision here is unbeatable, giving me complete control over temps, humidity, CO2, and VPD, ensuring my girls are in a controlled paradise 24/7. What I love most is how the app records everything automatically, so I always know exactly where things stand without having to keep separate records. If you haven’t tried TrolMaster yet, it’s a total game-changer for any grow setup! 💥 Shoutouts & Gratitude Massive shoutout to TrolMaster and Aptus Holland for powering this grow with tech and nutrition that’s second to none. And, of course, gratitude to Pro-Mix for the superb growing medium and to the seed banks behind the genetics. We’re running strong thanks to each of you. And to the whole community—thank you, everyone, from new friends to seasoned followers, lovers to haters. Your energy, whatever form it comes in, is all part of this journey, and I’m so grateful for it all. Special shoutout this week to my brother Daggadna—head over to IG and give him a follow! And if you’re loving the journey, remember to like, comment, and subscribe—it really helps the channel grow and reach others who may also dig this content! Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
10
Share
Resina a full OgKush buena varoeddsd automática ahora solo falta probarla
Likes
23
Share
@Kakui
Follow
V30, se hizo un riego con 1.2 EC y pH 6.2, ya se ha hecho el último LST a la rama principal de cada planta, ahora solo queda esperar que crezcan hasta una altura aproximada de 25~30 centímetros para pasarlas a 12/12. V31, creciendo. También, Luffy xD V34, riegos de 1.2 EC y pH 6.2, en los próximos riegos se incluirá líquido estimulante de floración, ya que en unos pocos días más se cambiara la luz a 12/12. Actualmente están de 25cm de altura, a los 30cm se cambiará a floración.
Likes
27
Share
I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!
Likes
17
Share
These keep on stacking calyxes on top of calyxes! A couple more weeks tops I reckon.
Likes
8
Share
@Theia
Follow
The tropicana cherry is a magnificent plant. Its stocky and stout with really great node space. I love how solid she is and i just see such a good foundation for stretch. A really explosive week of growth. I pushed PPFD up to 310umols. Dimmers are at 60% which is drawing 224w plus 18w of DRRB. I have alos started Emerson effect ... Another The Emerson effect is triggered by the simultaneous exposure of plants to light in the deep red and far-red spectra Deep Red 660 nm /Far-Red 700 nm . A bit of boring science that explains why you need both far red and deep red in order to trigger Emerson. The effect occurs because photosynthesis is driven by two distinct pigment systems working in series:Photosystem II (PSII): Absorbs energy most efficiently at shorter wavelengths (higher frequencies), like 680 nm (441 THz). Photosystem I (PSI): Absorbs energy most efficiently at longer wavelengths (lower frequencies), specifically 700 nm (428 THz). When you provide only the higher frequency (deep red), PSI becomes a bottleneck. When you provide only the lower frequency (far-red), PSII is not sufficiently excited to provide electrons. Providing both frequencies simultaneously allows both systems to work at peak efficiency, resulting in a rate of photosynthesis that is greater than the sum of the two lights used individually. To understand the Emerson Effect, think of photosynthesis not as a single engine, but as a two-stage assembly line. What is the Emerson Effect? Discovered by Robert Emerson in 1957, this phenomenon shows that plants perform photosynthesis much more efficiently when they are hit by two specific types of light at the same time: Deep Red (660 nm) and Far-Red (700+ nm). If you give a plant only Far-Red light, photosynthesis is very slow. If you give it only Deep Red, it's better but still limited. However, when you give it both at once, the total rate of photosynthesis is significantly higher than if you just added the two results together (1+1=3). What is Happening? (The "Assembly Line") Inside the plant's chloroplasts, there are two "workstations" called Photosystem II (PSII) and Photosystem I (PSI). They work in series, meaning the first one must pass "parts" to the second one. PSII (The First Station): This station is tuned to catch Deep Red light (660 nm). It harvests electrons from water. PSI (The Second Station): This station is tuned to catch Far-Red light (700 nm). It takes the electrons from the first station and uses them to create energy (ATP and NADPH). The Problem: If you only provide Deep Red light, the first station works fast, but the second station can't keep up because it isn't being "powered" efficiently by that specific frequency. This creates a traffic jam of electrons. The Solution: By adding Far-Red light, you power up the second station. It now "pulls" the electrons from the first station much faster, clearing the traffic jam and making the whole assembly line run at full speed. The Benefits for The Grow Because i am using the Biotabs water-only method, my plants already have a steady supply of organic nutrients. Implementing the Emerson Effect offers several distinct advantages: Increased Biomass: Because the "engine" is running faster, the plant produces more sugars and carbohydrates, leading to heavier fruits or flowers. Faster Finishing: Plants often reach maturity sooner because they have more surplus energy to complete their life cycle. Better Light Penetration: Far-Red light is very good at passing through the upper leaves. This "wakes up" the lower parts of the plant that would otherwise be shaded, allowing the whole plant to contribute to growth. Enhanced Secondary Metabolites: In many crops, this synergistic light can stimulate the production of terpenes and antioxidants, improving the "quality" (smell, taste, and potency) of the final harvest. The "Sunrise/Sunset" Trick I am using 4x Invisible sun Far red/Deep red bars,they use high-quality Samsung LH351H (660nm Deep Red) and specific Far-Red (730nm) diodes for 10–15 minutes at the start or end of the light cycle. This mimics the natural shift in light at sunrise and sunset, "waking up" the photosystems or signaling the plant to go into "sleep mode" faster, which can further optimize the flowering cycle. Enviromentally i am chasing a VPD of about 1,1kpa. My room seem to sit nicely at lights on at 24c with no real drama and a little help from a 220W greenhouse bar radiator. Its using abot 4kw/h a day atm because my room is attached to the side of my house and its been -5c.. I have had to add some humidity as its also very dry atm. Im aiming for RH of 65% with my 24c but it is more around the 62s.. VPD is crucial and is the focus for this grow for me. The autopots and Biotabs make it so easy ican really just focus on perfect enviroment. A VPD of 1.0–1.2 kPa provides enough "atmospheric pull" to move calcium and magnesium up from the roots, which is critical for the rapid cell division happening now.. Plants will be flipped on Saturday which is their week 5 as im a bit behind.. As this happens i will push PPFD upto 4-500umols. by week 2 of flower. Thats the plan anyway..