Recommended
Likes
39
Share
Day 92. Watering with fertilizers. Day 93. Watering with clean water. Day 94. Watering with fertilizers. Day 95. Watering with clean water. Day 96. Watering with fertilizers. Day 97. Watering with clean water. Day 98. Watering with fertilizers.
Likes
9
Share
Harvest day 67 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. First of all I would like to compliment Green House for this genetics. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. The growth was great from start to finish. She had no problems at all and also had no problems with animals 👍. I'm amazed at the great smell the beautiful buds give off😀. Of course I cut cuttings and if the taste is as good as the smell it will be grown again ☺️. A final report comes with the Smoke Report. Until then, I would like to say thank you to the whole Green House team and wish you all the best fun with the diary 💚🙏🏻 Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
4
Share
THESE ARE OUTDOORS LOOKING HEALTH AND GOOD GROWTH WILL BE PLANTED THEM IN THE GROUND SOON PLEASE FOnLLOW MY YOUTUBE ACCOUNT MARIO BUDS HERES THE LINK https://www.youtube.com/channel/UCrChGA3BfQXleGJficvD8XQ
Likes
34
Share
We chopped down the plants. Now they hang out to dry in the tent. The Trichs looked very good. Some milky, some amber, hardly any clear. Just the way I want it. The popcorn buds were rather milky. So we have more of a couchlock effect on the head buds and the maximum THC on the popcorns. I'm really looking forward to the taste💚
Likes
5
Share
@RunWithIt
Follow
Hit these girls with a topping at the end of their 3rd week. Also started them on liquid seaweed for added support. Update day 23: Transplant Update day 25: Defoliation
Likes
10
Share
Pretty chill week I see growth on both the girls, but the wonky looking one gots me worried. I will give them both a good shot at flowering. Who knows maybe the twisted one will have some frosty as fuck nugs. Till next week I wish everyone the best. 06/19/23
Likes
11
Share
@Mo_Powers
Follow
unbelievable, the performance of her in the still mixed weather in germany is awesome. the buds are starting to smell and are getting thicker. i'm a bit afraid that if the weather continues like this, mould will form. fingerscrossed that it doesn't happen. i give her a mix of biobizz root, grow and bloom every two days. I have removed the LST. from time to time I cut off the large leaves.
Likes
5
Share
Was going to chop beginning of week 9, waiting is all.
Likes
118
Share
Thank you spliff seeds for lab results! Excited about the cured and finished bud, i have enough asside to smoke and wait while the main jars are being cured at 62 rh and around 18 degrees celsius.
Likes
47
Share
Day 22 - Rolling into week 4 looking mean and green! 💪 I need to make a decision on what kind of training I want to dish out to this lady. She's growing a bit faster than her tent mates. Day 23 - Always experimenting - today I begin my first mainline! I've already built the foundation by allowing the plant to grow to 6 nodes, as recommended by the tutorial I followed by the brilliant Miss Nebula Haze @growweedeasy. My next step is documented here in a video, as I take my lush, happy, healthy plant, and give her the kind of haircut that makes you want to storm out of the salon without leaving a tip. 😂 I even managed to get in my signature branch snap early in the game - being held together now with duct tape. 🤦‍♀️ In all seriousness though, I'm thrilled to be trying this out, despite the agony of cutting down my plant to nothing but a stump and antennae. I've seen some great growers create some serious masterpieces using this method, and damn it my curiosity is taking control! Here's to learning something new! Day 27 - Came home from vacation to find that my plant had hulked through the duct tape that held her snapped branch together... I guess she's doing well. ☺️ Over the course of the past few days her branches have gotten notably thicker! 💪 Day 28 - Now that each new main stem has grown out, I removed all the growth tips from below the 3rd node on each side. I left the fan leaves in tact to give plant access to extra energy as she pushes through this intense training. I softened the branches with my fingers, very slowly, to tie down my new main stems horizontally across the net basket. I took a sterilized x-acto knife to then top each of my two main stems at the 3rd node on each side, leaving me with a beautifully symmetrical base to my masterpiece.
Likes
3
Share
On some pics you can see the orange trichomes so its getting time for the harvest soon. At D45 we stop fertilizing, now they will only get tap water (-pH) for the last 5 days, after that they will get 2 days of darkness
Likes
14
Share
@Peeman
Follow
Dealing with very strong winds this week. Also morning temperatures are below 15°C causing quite a bit of morning dew. Clear tarps are a big help as long as the strong wind doesn’t blow it away ha ha
Likes
48
Share
@Regenwurm
Follow
Die Woche war es heiss Max 27.5 grad im growraum und die Damen haben durst. Nachts nicht unter 23.5 Grad. Luftfeuchtigkeit bei relativ konstant 50%. Also Temperatur nicht optimal aber noch kein großes Problem. Bei einer der Ladies habe ich einen Anteil von ca. 50 % Coco. Das ist die hellere von beiden Ladies. PH Wert Gieß und Drain ok bei 6.2 nach ordentlichem durchgiessen. Vor 2 Tagen gespült und bei der Coco mit einem erhöhten Zusatz an calmag von Green buzz. Hier habe ich den ec gemessen der deutlich zu niedrig war ( 0.5 ) das heißt ab morgen bekommt Coco Lady mehr Dünger. Ich hoffe es ist der richtige Weg . Die Dame auf Erde sieht gut aus. Lichtstärke der Lampe auf 70 % bei einem Abstand von 40 cm. Düngezugabe 1 mal in dieser Woche und das andere mal gespült.
Likes
42
Share
So got the net in place this week and started doing my ScrOG. Also did a bit of FIMing and some LST to help speed things up a bit. So far the weaving hasn't been as easy as I was told it be some ive been using some soft twist ties to help keep them in place. Going to veg and weave for another week or so before I switch it to flower. I was told you have to continue weaving for 2-3 weeks into flower but im worried that'll stress the plant out so if anyone that reads this knows other wise, comment below. Increased the feed from 1 liter to 2 liters because I wasn't getting any run off. Now I'm getting 10% run off every watering and I've been able to keep my run off ppm to less then 100 ppm above feed. So far I'm really like working with coco and don't see myself going back to soil unless it's outside plants. The environment has been fairly stable the last week with outside temperature droping. Had a spike in humidity yesterday because it got up to 75% humidity outside where I live. Luckly when that happened my tent only went up to roughly 67% but it's slowly dropped down and then stopped at 62%. There calling for another heat wave this week with it reaching up to almost 40c again for a couple days.... can not wait for summer to be over. I'm a ginger so I'm more of a autumn and spring kind of guy and plus this heat is making it difficult not only for this plant but also the ones I started seeding a few weeks back. Got so hot that they stopped growing for 3 days, 2 died and 3 got burned a bit. So far this 300w SE-3000 Spider-Farmer light is really rocking it. Great coverage, adjustable and detachable ballast have made this a easy grow even with the mad heat. Definitely going to look at the SE-5000 light that runs at 450w or the SE-7000 light that runs at 650w for my next light in the 4x4 tent. Next go around I'm going to try this light in a 2x2 tent I have that I use for germinating. Well that's all for now so happy growing everyone.
Likes
12
Share
@Naujas
Follow
The girl's upper leaves look terrible :( I didn't manage to give her more potassium in time :( Well, the flowers bloomed really well, they are not small, and there is definitely a lot of sugar on them :) the smell is also amazing :) apart from the upper leaves, everything looks pretty good :) when I cut her, her image will change :) I think she has max 2 weeks left ;)
Processing
Likes
57
Share
Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , she is well into pre flower now but the stretch has not yet started so I figured it's no or never too defoliate and tigh them down , this grill really has grown right out this week and is unrecognisable from the plant just a few days ago , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)
Likes
22
Share
D22/V20 - 14/09/23 - CO2 Dispenser is working good 💨💨💨 D23/V21 - 15/09/23 - Added some LST to bend her down 🌿🌿 D24/V22 - 16/09/23 - EC raised up to 1.0. 📒 pH trend is down, so I'm going to change the water in the next days 🧠 D25/V23 - 17/09/23 - Now CO2 is provided by Batman 😋 🦇🦇🦇 D26/V24 - 18/09/23 - Added LST and made some defolation 🌿🌿🌿. EC is 1.1 and pH is 6 📒 D27/V25 - 19/09/23 - LST and new bending 🌿🌿. EC 1.2 pH 6.2 📒 D28/V26 - 20/09/23 - All seems ok, but I noticed some strange spots on her. I'm going to investigate ️
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
29
Share
@Reaper
Follow
ph meter is broken. i use ghe liquid to read ph lol ph goes down every night. 650ppm is still too high for this strain, drinks a liter everyday i need a bluelab ph/ec meter 2 Februari: the buds start to appear on the hydro plant with thc everywhere lol