Likes
3
Share
@Ghost17
Follow
Updating two days early but wicked happy with the progress so far. Starting to understand the strain and what it likes to be fed so just trying to adapt to it and really lock in on a smooth feeding schedule. Have been against pruning in the past but couldn't resist attempting "Nebulas Manifold" and finally topped after the 6th node finally developed this morning. Topped on the 3rd node with leaving a stump for connection and trimmed the remaining nodes below. Was pretty surprised at how much they were reaching when I check in on them tonight but happy to see they're still crankin. Time to wait for the 4th node and top again. As always, any questions, comments or suggestions are always welcome! Thanks!
Likes
17
Share
So that's a week n a few days of flushing done and she's looking ready for the chop! Beautiful colours in and around buds now and absolutely covered in trichomes. I can't post close up pics of trichomes unfortunately cos I don't have a camera with the magnification it needs. Just gonna wait another few days and harvest then. Happy days 😁
Likes
12
Share
@Terpyboyz
Follow
Hi growers 👌🏻🍁 This week I’ve had a few slight more issues this run hasn’t been the best so far. But I’m hoping if I can just up my feed as each watering I’m feeding the ppm are only at 450ppm 1ml grow 3ml bloom 2ml top max 4ml heaven 4ml actavira In a 5litre bottle - every 3 days I’ve had a few herm on me - which has been a bit of a disappointing, it just tells me my rooms not dialled in at all. Few more issues to fix next run. All the pink runts autos that finished flowering dried for 1 half weeks then went into canna butter. If anyone can give me a message or comment of anything I can do to try fix these girls I would appreciate it ✌️🏻🍁
Likes
7
Share
Avanzan la semanas de floración y esto se pone cada vez mejor, las flores han ido cogiendo volumen y repletandose de tricomas que huelen genial.
Likes
13
Share
So, eventful week. Prior to putting my seeds into my system, my light and rdwc system was left on as I was dialling in the growing environment before placing the seeds as a final home. My only issue was I had a light leak BEFORE putting the foil top covers on the clay pebbles. Long story short, I got algae which ended up turning to root rot. I spotted it very swiftly and did a res change adding beneficial bacteria to the system along with the base products of remo nutrients. A few days later new growth and recovery is taking place. Day 16- Fully back on track, new roots shooting out into the water and the growth rate has picked up as it should. Foliar feeding twice a day for a little boost until the root system establishes a bit more. Huge changes in just a day. Can't wait to see what a week's growth looks like. Really loving the sunset/sunrise feature on the trolmaster, something I got to experience watching recently! Watching by closely to make sure everything stays in track. Stay tuned for the next one 😉
Likes
1
Share
Likes
2
Share
Likes
6
Share
This brings the Journal up to speed. So going to start the 48 hour FLush this upcoming Sunday as well as going to move it to 48 hours of light insted of 48 hours of darkness. Then straight into the Freeze dryer to bring it down to 60% humidity in the bud and then to the curing jars. Going to be Timber 2 days into Week 9 of FLower. 1/20/2023 Week 8 (Day 5)- Flower- Day 107 overall T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! 1/22/2023 Week 8 (Day 7) -FLower- Day 109 Overall Flush Day and 48 hours of Light. I subscibe to Dr. Bruce Bugbee's suggestion that production is under light instead of under darkness so I no longer do 48 hours of Darkness, I go 48 hours of light before Chop, sending my plants on a marathon run before I Cut. Here is Dr. Bruce on basics of lighting https://www.youtube.com/watch?v=ID9rE5JewVg T-2 days until TIMBER
Processing
Likes
33
Share
HPS Lamp 600w GORILLA growing wel and fast. 🙏💯
Likes
3
Share
@Jeekk
Follow
Spiderfarmer humidifier got my 2x4 dialed in almost immediately. If it performs this well over time I'd recommend it greatly. Had some trouble with light burn because I briefly cranked up my light and uv at the same time lol. I stopped that. Thinking about flowering soon. If anyone sees this, what do you think?
Likes
12
Share
12/6 Unfortunately, the temperature remains very high, I will try to add a little moisture, I removed some leaves to make it breathe and allow the light to penetrate better. 16/6 The switch start is going very well, the plant seems to like a lot of fertilizers 18/6 I gave for the last time the biogrow, it seems to me quite full of nitrogen to better face the flowering
Likes
8
Share
@Kirsten
Follow
19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. I have removed all LST equipment from both PPP1 and PPP2. I'm going to let them grow up now, and I plant to implement a Scrog net, if they get any taller, which I hope they will. However they are most likely finished with their final stretch. My mistake, I went too hard on the LST. Thanks for checking out my diary 🍃 ✌️
Likes
10
Share
Day 66 : Lady is fattening. I increased nitrogen (bio-grow) in order to fix some deficiencies. Also i removed Calcium this week. She is a bit behind, maybe 4 weeks, i don't know. Trichomes production just started. Edit Day 70 : She takes weight but not so fast, trichomes develop is slow, and i assume that she is stressed because of air flow on her for much time. I hope she pass this situation. I increased Biogrow to 5.4 ml / L. The other doses remain the same.
Likes
18
Share
@Hashy
Follow
Week 10 Light cycle=12/12 Light Power=150w Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 50% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use Fri 23/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=0.5ml/L Terra Bloom=3.0ml/L Sumo Boost=2.0ml/L P/K 9/18=1.0ml/L Easy Ph down=0.1ml/L Ec=1.9 PH=6.8/6.8 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(L) Total volume left=2.4L Total volume used=10.6L Volume per plant=2.6L (Est) Runoff. Total runoff=2.5L Ec=2.2 PH=6.2/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 64)(Day 26 flower) 📋 tray is just high enough that they aren't sat in runoff. Sat 24/2/24 #3 (Day 65)(Day 27 flower) 📋 nothing Sun 25/2/24 #3 (Day 66)(Day 28 flower) 📋 Lowered light power from 150w to 140w Mon 26/2/24 #3 (Day 67)(Day 29 flower) 📋 Tue 27/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.8/6.8 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=4L Total volume used=9L Volume per plant=2.25L (Est) Runoff. Total runoff=0.5L Ec=1.8 PH=6.5/ Didn't run as should because forgot to plug it in. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 68)(Day 30 flower) 📋 Wed 28/2/24 #3 (Day 69)(Day 31 flower) 📋 Thur 29/2/24 #3 (Day 70)(Day 32 flower) 📋 I feel sorry for this one as she is cramped into the corner, getting less light then the others and it's hard work getting the camera past the other ones to get any pictures. She is still doing fine though. Back soon. Take it easy.
Likes
2
Share
Likes
3
Share
She got to big for the 2x2x4 so I had to move it to a bigger 2x4x5 that has a new never before used 320w kingbright so this whole grow is evolving as it goes I had no clue that hydro and 200w in veg would make the plant this big. Temps are much easier to control now in the bigger setup. the 7 gallon res. is loseing about 1 gal a day I top it off and check PH/EC once a day it almost never needs adjusting so that is really nice.
Likes
11
Share
@artems
Follow
Marker didn't take well to the mainlining process; as a result, one cola was almost entirely consumed by mold. However, overall, things are looking good. I ended up with a small, resilient plant with a nice aroma of pineapple and Skittles, with hints of gas towards the end. 🍍🌿 Towards drying and curing now! 🌬️🎊
Likes
20
Share
@Lazuli
Follow
Final 2 weeks maybe 3, Therese so many flowers on this plant its insane haha A heavy blueberry smell she got