Хочу обратить особое внимание на качество семян и генетику! У меня все кустики один в один. Всем мира и добра а так хороших добрых всходов! За качество семян 10 звёзд За качество всходов 9 звёзд За качество роста 10 звёзд За устойчевость 10 звёзд Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀

Going to finish soon!

Hey everyone 😊. The two women will be in the vegi tent for the last time under 6/6 this week, and will come to the flower tent 🤗 next week. Otherwise there is nothing to report this week, except that both are developing really well 😀. Have fun with the update and everything stays healthy 🙏🏻☘️ You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Week 21 and 3

Day 16 of bloom Plants are absolutely thriving! Installed the Lumi FR/UV light running it for 15 mins at the backend of the light cycle. EC is at 2.5 Last push on the stretch now.

Soaked in water for 18 hours and then planted into pot . 24 hours on and she’s broke the surface . So keen for this one it’s my fave smoke

👉Day49- fixed some LST so plants had the max light possible and did defoliation,i noticated 2/5plants have toooons of tricones but rest 3 olmost nothing 😣....some new yelow leafs start to show on 1plant. Wil make video later today. 👉Day51 Got seeds today from 42fastbuds skittlers and blackbarry for next grow :D and got 4x gratis lemon skunk seedss(some new local breeder)😘😘💚❤️I think i will grow them same as this time same pots with 3xblackberry and 1xskittler 1xlemon skunk 🤝 👉Day53 plants looks good... on some still little calsium deficiency on 2 plants mostly,they are now cca.70cm main one 85cm. +Did the last defoliation and reorganizate them,noticated alot stigmas on buds turning orangeish..🧡 Changed the light from 21h>20h ligh ,owerall flowers flowring rly good all flowers got alot of tricones now,👍cant wait till harvest!!💚✂️💚🔬🧡🛏️🧡😂 👉👉Til next weeek mates!!!stay safe and have fun last days of booring 2020 :D

Aquí ya en mi 8va semana después de cambiarlas a unas macetas más grandes de un aproximado de 15 litros. Bueno, se preguntarán dónde está la tercera si eran tres y ahí se ven dos. Resulta que se murió, aconsejo de mantener lejos a tus gatos. Sí, mi gato macho orinó en su sustrato (aconsejo siempre mantener limpio su arenero para que no busque otros lugares donde orina) y pese de hacerle su lavado de raíces y cambio de sustrato, no sobrevivió. Aquí fue la única vez hasta ahora que pasó algo así. Hasta ahora sigo renegando con el gato, pero bueno no es culpa de ellos, sino de uno mismo. Hay que ser más precavidos. Buenos humos!

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....

Fuldstændig vanvittigt der har været så meget stress at jeg har haft glemt hende her hun har det satme sygt godt nu takket være dygtig brug af gødning plus at jeg ikke har haft overvandt. 😉. MEN JEG HAR jo stadig lang vej til den færdig

Happy with outcome, have to donate something about humidity, even though these strains are ment to handle it but had to pull a bit early because they don't handle it that well at all

05.04.21 Anfang der 3ten blüte Woche.Hab mich jetzt dazu entschieden das biegen und binden ein zu stellen natürlich halte ich weiter die Blätter unter dem netzt aber ich erlaube den Ladys jetzt durch das Netz auf zu steigen hab ja noch genügend Platz nach oben(hoffe ich). Das Wachstum is immer noch ziemlich stark ich denke mal das wird sich diese Woche auch nicht wirklich viel dran ändern und sie zieht vom trinken her stark an hab anfang der ersten woche 1x 4l mit Zusätzen gegossen und das hat 7 Tage gehalten bin jetzt an Tag 15 und muss alle 4 Tage 4l giessen gutes Zeichen denke ich mal..... 06.04.21 hab heute nur Blätter unters netzt gesteckt und schon von meinem nächsten Grow geträumt..... 07.04.21 wieder ein Tag vergangen und mehr als Blätter unterm Netz halten und hier und da mal ein Blatt entfernen war heut auch wieder nicht los... 08.04.21 heute war mal wieder bewässern dran und das tägliche Spiel Blätter weg stecken sonnst war nix weiter..... 09.04.21 hab das gefühl das das Wachstum anfängt sich ein zu stellen und Blätter hab ich heut wieder unters netzt gebogen was das hoch drücken der Blätter betrifft sind die Ladys ziemlich stark und eigenwillig gehe 2x täglich runter drücken unters netz werde nächstes mal eine kürzere Maschen weite fürs netz nehmen dachte 10 cm ist genug platz aber 5 cm pro Kästchen sollten sicher auch reichen das macht das spiel mit dem biegen und binden sicherlich einfacher und lässt die Blätter besser an Ort und Stelle Ach ja und ein paar Blätter hab ich heute noch entfernt ist aber auch bald mal Ende mit Blätter entfernen ich will sie nicht zu stark stressen... 10.04.21 Blätter unterm netz halten knapp 2 Std einige Blätter entfernt die von unten gegen die buds drücken sonnst war nix.... 11.04.21 hab heute wieder mal nur Blätter unters netzt gedrückt und den Pflanzen beim wachsen zu geschaut die Woche lief super bin echt stolz auf mich das ich die Finger so gut von der schere lassen könnte die letzten 21 Tage hab das netzt mal fast voll bekommen obwohl ich zu geben muss das die Masse die da wächst mir angst macht vor schimmel im späteren Verlauf des grows....

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

The permanent markers are doing alright. They're still really short compared to the others, but they're finally starting to take off. I can kinda see them catching up soon. The new year is off to a frosty start! We've had snow falling for what feels like forever. My kids are loving it, of course. They're building forts, having snowball fights, and turning everything into a winter wonderland. It's been a lot of fun to watch them enjoy it. All this snow is really making me think about how quickly time flies. It feels like just yesterday we were celebrating the holidays, and now here we are knee-deep in winter. I'm looking forward to warmer weather, but for now, I'm enjoying the quiet beauty of fresh snow.

One more nice week. Defoliating and trimming by cat 🤣. About nutrients in comments, its my first time and plagron do fine i think, i have zero problems.

Smooth sailing so far....8 bud site so far...might do some defoliation nxt weeks...let's see

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 😻 We did our typical 3rd week defoliation earlier and managed to pull a few cuttings from each plant to clone...Bud sites are becoming way more prominent this week and all plants are praying hard to the MarsHydro. We've increased bloom nutrients and they seem to be responding well to it.. color is great, we couldn't be happier and with how things are going..we intend on dropping the MarsHydro a few inches today and will update any changes midweek..thanks as always for dropping by and happy harvests everyone!!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 03/09/23 We increased bloom nutrients again (10ml/gal), they're eating with every watering now (4th water only).. these happy trees are praying hard to the MarsHydro!!😻 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Well growmies this one is a keeper that's for sure 👈 couldn't of asked for better Genetics 😉 She lead the pack during the entire grow .... Amazing Plant Thanks to Fastbuds for killer Genetics 🙌 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the FC4800 and the MarsHydro UR45 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34