The Grow Awards 2026 🏆
Likes
Comments
Share
@Bili_R
Follow
Day 23 We were 3 days absent. I think the Lamp was a bit far away. Lots of stem growth. Next time we better top them early.. I don' really like how they grow so tall and thin. and I think I prefer earlier topping. Not sure why people like to top after 5th node so much. But everything is still fine:) They show signs of hunger I guess. We will feed them today full dose bio grow. Day 25 Today them was put out on the sill:) All looking good so far. Day 27 almost last day of week 4 everything is looking good:) some hairs going on, weather is shit but they seem to like it. hope we will see some pre flowering going on next week. new week will be an interesting update, weather is looking good next week 5...
Likes
3
Share
Cold week. Rain and clouds most of the days. Just 1 feed, too many nutes on soil.
Likes
77
Share
@Krisis
Follow
03/10/25. Start week 2 flower or day 8 Again…going with these definitely are based off candy and not size. She’s stretched 8 inches already. Her sister, Mellow yellow, is the same height. As usual she’s still yellow lol. Both seem to be more shy than their friends about showing some buds. Lots of white hairs sprouting all over. I’m sure they’ll be showing up any time now. These things are so bushy and leafy they almost look like some kinda big plant that you’d just see near some piece of art in the corner of your house. Anyhow, they’re drinking a gallon and a half about every 4 days. Usually feed every other water but these were getting a bit of spots around leaf edges.. that I’m thinking is potassium deficiency. So, didn’t skip feeding and actually increasing by going early with green sensation at half dose. The bottle says 4 weeks and up, but if they’re lacking, what can it hurt? I’ve increased light intensity to about 75% and they’re currently 13 inches from it. Going to raise it up some in the morning, as this seems a bit close for the moment. That about covers it for now. ✌️✌️
Likes
5
Share
@Krissci
Follow
This week I have topped for a 2nd time with auto's it is a very tight window to train correctly. Now have 4 main nodes..mostly LST and light defoliation going forward
Likes
49
Share
Hey everyone 🤗. This week you've put a lot of energy into growing your buds. You look very beautiful :-) Next week I'll add some Pk 13/14. I wish you lots of fun with the update, stay healthy and let it grow 😎 Strain : Sour Diesel ☝️🏼😍 Genetic: Diesel x Northern Lights 👍 Vega Lights : 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lights : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡 ☝️ Soil : Canna Terra Professional + ☝️ Nutrients : Canna Terra Vega, Canna Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal/Mag, Canna Ph - Grow, Canna Ph - Flores ☝️ 🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧
Likes
7
Share
Boy oh boy look at these babies grow I'm studying them more and more to ensure they are happy. I've notice that gelato 41 is producing bud spots like thats what it was ment for. Tropi cherry is coming along but not as fast as G41, and runtz muffin im a little disappointed in but i believe that is my fault for im still new and have only grown 1 plant prior to these 3. It also doesnt help i had to cut the vegitation cycle by 2 weeks as well. and further more I was at least able to give 2 clones away, the rest were still good but couldn't find them homes so i had to throw them away. Next time I'll have all the room they need and can't wait to make mother plants of my favorites.
Likes
15
Share
Heureux merci Kannabia pour cette beauté. La nature fait de belle choses 🍁❤️ comment dire que j'ai hâte de la déguster ❤️
Likes
18
Share
Hi guys, day number 40 is the last day at 18/6. Now I'll give 24 hours of darkness and Then I'll start the 12/12 cycle. If I have not done anything wrong, I think I will collect about 100 grams of dried flowers per plant. I have not had any problems and I hope everything goes smoothly until the end. Stay tuned 🦍😁💪🏻
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂
Likes
6
Share
@Lazuli
Follow
The best photoperiod strain ive grown, its not too stretchy and put on insane amount of weight. 10/10
Likes
3
Share
2-3 full node sets on the remaining 3. Ol' helmet did not make it. Still hand watering but getting the #autopot cleaned and ready for use. Mixed the buffered coco into some perlite. This big ol' hand-me0-down cooler is a must have!
Likes
18
Share
Ran into sulfur and phosphorus deficiency week 7. Added the small scoop beastie blooms and like an 1/8 tsp of silver bullet sulfur terp enhancer. Still running about 9ml per gallon at 5.8 possible hydrogen.. AC motor went out on one of the ac’s, will have it fixed by Wednesday been cooler temps and storms lately so been okay.
Likes
6
Share
Likes
65
Share
@Dendegrow
Follow
Welcome to week six! 🌱 Week five was a complete success – all parameters are perfectly aligned. I’ve increased the water conductivity to a solid 3000 and bumped the CO2 level up to 1200 🌿. Light intensity is now set at 1400 µmol in the center and 1000 at the edges, which will keep the plants strong in their generative state 🌞. I’ll maintain these levels until the end of the third week and then start slowly removing the large fan leaves to ensure the buds get plenty of light 💡✨. I’m also trying something new to activate the “Emerson effect” 🌄: I’m running the deep red lights for 5 minutes before sunset and for another 5 minutes after the day ends. This should give the plants a final boost in photosynthesis, helping to maximize their growth potential! Everything’s looking fantastic so far! The Black Cherry has rooted well across different experimental setups, and at the end of the grow, I’ll provide a full report on the best care techniques for both strains 🌺👌. Willkommen in Woche sechs! 🌱 Die fünfte Woche lief perfekt – alle Parameter stimmen. Ich habe die Leitfähigkeit des Wassers auf satte 3000 erhöht und den CO2-Gehalt auf 1200 angehoben 🌿. Die Lichtstärke beträgt jetzt 1400 µmol in der Mitte und 1000 am Rand, was dafür sorgen wird, dass die Pflanzen stark im generativen Zustand bleiben 🌞. Ich werde diese Werte bis Ende der dritten Woche beibehalten und dann langsam damit beginnen, die großen Sonnensegel zu entfernen, damit die Blüten ordentlich Licht abkriegen 💡✨. Zusätzlich probiere ich etwas Neues aus, um den „Emerson-Effekt“ zu aktivieren 🌄: Ich lasse das tiefrote Licht 5 Minuten vor Sonnenuntergang und 5 Minuten nach dem Ende des Tages weiterlaufen. Das sollte der Photosynthese einen letzten Schub geben und das Wachstum der Pflanzen maximal fördern! Bis jetzt sieht alles fantastisch aus! Die Black Cherry ist in verschiedenen Versuchsreihen gut angewachsen, und am Ende des Grows werde ich einen ausführlichen Bericht darüber abgeben, wie sich die beiden Sorten am besten pflegen lassen 🌺👌.
Likes
3
Share
So these buds are super piney in terps. The plant itself was ok— super vigorous in veg and once it was flipped to flower around week 3 I could see the buds were ok. More auto like in quality versus photoperiod.
Likes
Comments
Share
@420Hunter
Follow
Ernte nach 64Tagen. Für den falschen ph wert ganz akzeptabel. Auch erst mein 1ter richtiger grow. Hat spaß gemacht. Nächstes mal wird einiges besser. Wenn die blpten fertig sind gibts noch mehr bilder.
Likes
6
Share
Die Gorilla cookies auto hat sich auch wieder von ihrer besten Seite gezeigt. Nach 6 wochen blüte solche wunderschöne buds zu entwickeln ist einfach ein Traum. Ich kann jedem nur fastbuds empfehlen. Egal ob outdoor oder indoor.