Chugging along. Much better fertilization rate than expected. All looking good up and down each branch. Almost all budsites are stacked with seeds even the lower ones Moved to different tent cuz original one was a damn mess with plant matter and whatnot on the floor. Only one that looks possibly behind us the PotG. I just think it’s a matter of not having seeds busting out the bracts quite like the others. Very happy with the results Check out previous weeks for procedure information. I’ll add them to each with soon. If not showing now go back to first couple weeks of the diary to see specifics on what I used, and how.

10/16/18- water Tap-left out to release the chlorine. 1 gallon with Yucca/Fresh Aloe/thriveNAmminos/UrbNatural

+ Day 43: 2.25L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.5ml/L Final PH 6.13 Day 42: 0.625L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.5ml/L Final PH 6.13 Day 41:2.25L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.5ml/L Final PH 6.13 Day 39: 1.75L bottle water EC 0.35 + 0.3ml/L CalMag + Terra Flores 4.0ml/L Final PH 6.13 +

GIVE THIS GROW A THUMBS UP 👍 WEEK #2 DAY 9: She was stunted day 6 & is recovering from that currently . She is in a 5x5 with 3 autos between 35-42 days old . The plan is to veg this single Cereal Milk out to fill this entire 5x5 once my Autos are harvested . This is my first run with this cultivar & breeder however it was an easy choice considering I adore the taste , smell, & smoke of the strain! Week 1 issues: The tents VPD was out of whack . Due to the VPD being out of proportion slowed/stunted growth occurred equally across all 4 plants in the tent . Plants showed deficiencies of CalMag and interveinal yellowing , necrosis leaf spots , reddening leaf petioles & leaf stems slowly progressing in the worst affected plants to red leaf veins & lastly droplets of condensation on the leaves (plants were sweating) Anyways after I fixed the VPD issues , I added a makeshift dome for humidity retention of the Cereal Milk & 3 days later which is today she has added 2 new nodes almost catching up to where she would be with normal healthy unstunted growth at day #9. She was transplanted from her starter pot last night into a 2 gallon with plenty of dry amendments mixed in for a 6-8 week veg. I’m debating on scrogging this plant or LST & Supercropping the SHIT out of this plant . I’ve never scrogged before and am not welcoming any new learning curves at the moment which is my main reason not to even though I think it may be the biggest help to filling this tent & “supporting” the enormous load of bud sites I am planning to grow . I worry about to inconvenience of defoliating & training branches down without being able to get around the outside of my tent given its location in a corner . If I had anticipated wanting to grow a single 2lb + plant when determining my grow location I would’ve placed it more ” openly “. If I can think up a work around to canopy maintenance so that I can keep it clean & by the books I’ll quit complaining & try it . Otherwise she’ll be LST’d & Supercropped OR topped and mainlined . Day 14 END OF WEEK #2 I’ve added remote temperature & humidity monitoring/controller. Now I can monitor the dips & swings while making adjustments to better dial things in . (Just trying it on for size here , for full disclosure I am not in love with it & if I can not modify what it is that is bothering my existence I WILL be returning this unit AND purchasing another brand with the capabilities I am looking for the connectivity for this specific unit I am trying was a BIG deciding factor for me but all in all is not enough to make me settle on this one if I can potentially have it all. . Odds are highly leaning towards returning this unit .) Finally raised the pot to level with the older girls in flower currently . I was wrong when I reported in setup that she was “30 inches “ from the light . She in fact was 35 inches‼️away so I raised her to be 26 inches from the light by placing a 1 gallon bucket beneath her . I WILL NOT LET THE MID-END OF FLOWER & DRYING to cause my run to get derailed

Hello everyone week 2 has passed for this LSD-25 auto by Fast Buds 😎 this plant is doing very well growing at fast pace and with a beautiful green colour on the leaves. Topping & LST for my girl 😎 wish you all happy growing!

Piękny kolor aż czarne . Zapach Mocny . Działanie odprężająco. Bez jakiego kolwiek treningu okolo 15-32 g suchego z rośliny nie ma tragedi ale spodziewałem się więcej

Video 15 minutes - Explaining Grow area settings - Fast Strains / Phytoled Resin NX2 200 - 4 modules (Bluerple Spectrum)

one month and two weeks of flowering, the increase in resin is impressive, its aroma is getting stronger and stronger, everything is going well so far, we do not have any type of lack or excess of fertilizers 😘

Week 2 - the growth is very good and I can see a healthy root development at the bottom. I watered twice this week - a little dryback in the first weeks should be good to promote roots. DLI 20 / EC 1.2

Day 42-49 (June 11th - June 18th) (Day 43) I need to work on my early veg times. Things are just too slow in the seedling stage. Next round I will use a coco/Destiny blend for the better aeration and lower EC. Even with my indoor plants. I notice plants started in coco root way faster. Not just with weed either. All plants seem to like it better. Coco is far superior to peat imo. (Day 44) I’m pruning off the lower branches on my rooted blackberry clone. It’s cool to see it’s weird reveged structure. Lots of the fan leaves have trichomes on them. (Day 45) Something really weird is happening to Grapefruit #3. The leaves are browning and starting to gnarl. It could be an insect of some sort as it’s the only plant looking like that. (Day 47) It just hailed super badly and the leaves on some of the plants are pretty damaged. In my neighboring town the hail caused multimillions in damage so we got lucky here. I’m going to spray some method 1 pps prevention spray today to help keep pests at bay. I will try to do it in overcast or shade. I’m seeing what looks like thrip damage but there is no way they can survive the cold nights here. Dog shit in my yard is attracting flies which then land on plants spreading god knows what. (Day 48) Autos are still really stunted. I wasn’t able to find out how big they will get so I will just wait and see. I would guess they’re in their flowering stretch because their growth is unusually fast right now. I will probably just end up with 6-10 inch ornamental plants for autos. Definitely should have started them around mid summer in coco then transplanted. Time is of the essence with autos it seems. (Day 49) Photoperiod plants are looking really happy but growth is stunted from the cold and lack of light. I was hoping for bigger plants by now. A lot of growth can happen in 2 weeks so we’ll see. I’m definitely not transplanting on the 21st but the sooner I do it the better. The bbb clones are struggling hard to root but I can see new growth on them starting to push out. My clones are taking a really long time to establish. Every plant here, I don’t care how stunted, must be flipped by July 15th.

Anfang vierte Blüte Woche Pflanzen sehen gut aus Habe sie generell wenig gedüngt

July 13: perfect cannabis weather after last week’s heat wave. Another heat wave next week, but for now it’s perfect. Added a third scrog layer and tied it off to some water bottles. This type of scrogging works, is easy, cheap, and it’s easy to still move the plant around the yard as needed. July 14: re-did the scrog net using a larger piece with more squares. Supercropped some ends to keep the growth tips at the same elevation. We’ll see how many colas I can make of this. July 16: looks happy enough but I need to up the water volume in this heat. July 18: really hot the last few days (33 C) so lots of watering and misting to keep them a bit cooler. Look really green and robust. 👍👍 Also wetting outside of grow bags to get some evaporative cooling for the soil. Added malted barley and Power Bloom to some soil and added it as a soil layer. Added plain soil on the top to deter birds from stealing the barley kernels. A bit less than 1 tbsp of Power Bloom per 1 gallon of soil with a bit more than 1 tbsp of malted barley per gallon of soil. #seedsman420growoff #seedsmanseeds

20/06 the plant is having a good streching, I try to control the height so that all the buds are always the same

There isn't much more to say about this fantastic strain. Hardy, easy to clone, quick to flower and absolutely delicious in every respect. It resists well to high temperatures, "accidental" over fertilization, and recovers soon after a period of drought. Easy and fast.

12/30 MONDAY 4am MB 4g & 0.8ml Purpinator. I tried Liquid KoolBloom, it's ok. 2pm Put the small Orion cola in a jar, not a big producer under my grow conditions but it smells and tastes just beautiful. LOTS of resin very sticky smokes just fine after hanging to dry for a couple days. 12/31 3am. 1pm took another cola from Orion about 1.5 wet so maybe half oz dry. Small grows are still the way to go for me. EVERYTHING is just so much easier, less messy. I get about the same amount from 1 gallon indoor soil grows than I did from HUGE 3 gallon fabric pots that I used Outdoor soil...infected shipped all over the country so every kind of bug.... I did NOT know to use airtight INDOOR specific soil or it will have BUGS & MITES...., like Root Mealy Bugs that will eat the roots as they grow...I didn't know that could happen!!!! 1/1 4am they are great 1/3 11 am Took the smallest cola from Cookie Apple & arranged the plants closer together. They fit like a puzzle as I take each cola & require a little less water. 1/4 2am

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 17/11/2019 - Pot feels light and the is bottom dry to the touch time to water, gave her 1,5l of water PH 6.2 with 0.5ml Grow, 1ml, Bloom and 0.5ml Max Biobizz reduced the dosage from last time, watered util some runoff appeared. 18/11/2019 - Mixed another batch of Alg-a-Mic 2ml per liter to spray on lights off PH 6.2

Switched to 12/12 a few days after first shot of bloom nutes, she seems a little heat stressed but relatively happy atm... Edit: We did manage to get the temps down

Hello guys and girls. What a difference a week of good weather can make. All 3 of the ladies are pushing on really well and are all green and clean. I’ve continued applying neem oil to the top soil and the flies have totally gone. I’ve been upping the water every other day. Currently the large super skunk is taking 1L, small super skunk and the snow Ryder are on 500ml. With this being my first grow im just taking it day by day in regards to watering. All feedback is always welcome. All the best! Cannabud

For the Herbies contest - https://growdiaries.com/diaries/157348-grow-journal-by-dabbertglobberfield#gallery=6777378 - Grandmommy Purple is guilty multiple noise violations for being too loud and for stanky funk. Harvest - 169 days / 66 days in flower Well, we did it. I made it to the end. All I can think is...WOW that was A LOT of work. But I think I had very good results for a first time grower. I For harvest, we took Plant B and D and prepared them for immediate freezing. Altogether, I ended up with 1212g wet on plant B and 1089g wet on plant D. I ended up freezing 1816g of this. There was some from each of these plants that was set aside from freezing because, for whatever reason, I thought they were not worthy of washing because of how progressed the leaf damage was from the root rot battle. So that was cut up and dried as nuggets instead of hanging like the rest. Sawtooth and Plant C were both harvested and hung in the tent to dry for 12-13 days. I think I overdried by 1-2 days because when I jarred them they struggled to raise up to 55%. So I am using rh% packs. After drying Sawtooth and plant C, I ended up at 459.8g for dried flower and 170.8g in dried trim. So just over 1lbs between the 2 plants and 4.15lbs wet between the other 2 plants that was washed for hash. So... are you for real with the effort involved with washing bud for bubble hash? I don't think I would do this in the warmth. I only pursued doing bubble hash cause it's cold right now and I figured that would really help. Even in the 30s(fahrenheit) stuff would stick. It's hilarious how sticky of a process this is. I hope you have a bunch of gloves, water, and ice to burn through. I went through over 60 gallons of distilled water and 80lbs of ice to wash the 4 lbs. I am envious of people in videos using a hose to collect, clean, and refill. Also, doing this as a 1 person show is the definition of insanity. I broke the washings up into 3 parts. The first part was was the tester wash. I broke off 420g of plant D's 848gs available. I used 7 bags to see where I would end up. I used 220, 160, 120, 90, 73, 45, 25. What I determined was that if I was hunting a specific micron with a lot of material this would help find what you can get. But for the next washing I reduced the amount of bags to 4; 220, 160, 45, 25. The time, with the 4 bags, I washed with 809g. I had a much more favorable experience and return this second time but I had green fast and probably used too much ice. The 3rd wash was the remaining 631g and I found an extra 137g I added of sugar leaves and trim, brining the 3rd wash to 768g. I used 5 bags this time; 220, 160, 73, 45, 25. By the 3rd wash I have become an expert in collection but also never want to do it again. lol. 2 of the 3 washes have dried and I have 43.4g of bubble and 2.8g of dry sift. 37.4g of that bubble is able to be pressed into rosin. I will probably press that dry sift as well. The other stuff is 25u or 160u that I will experiment with or cook with. The other stuff is drying so I can't add it all in. I pressed a bunch of trim and some flower. The trim presses nice and the dab is decent. I am working out a good temp for the flower. But the problem with all these tests to find the sweet spot is that I have all these testers to go through but want to keep pressing and trying that! I think I will need to work on a better storage solution. I can't wait for the fresh frozen bubble hash rosin pressing... I have over 20gs of bubble to put in one bag. I am really looking forward to this. But I will need to work up to that pressing since I have never pressed hash/kief/bubble before in my rosin press. So this should be really fun. I will 100% post an update of the hash pressing once I do that and also after the 3rd wash session is done drying. In closing, saying I learned a lot from this grow would be an understatement. I fully expect to start it back up in a few weeks after some R&R then some R&D. There's some things I will need to work on before I start again, such as: having a single external reservoir that feeds multiple plants, hard to clog and easy to use ebb and flow system, miscellaneous final run stuff like space for drying. So thanks everyone for hanging out and perusing the photos and or reading all my huge rambling updates and thanks to those for the help along the way.

Showing a little pistil on day 30