Recommended
Likes
Comments
Share
10-8-2024 TOP DRESSING AND WORM TEA..... NOTHING MORE 10-9-2024 22ND DAYS INTO FLOWERING SMELLS CRAZY ON THESE STRAIN GETTING SOME SNOW ON TOP LET'S GO 10-11-2024 DO NOT HAVE ANY PEST BUT JUST IN CASE NATURESGOODGUYS HOOK ME UP WITH LADYBUGS JUST GOT HANGING PATCH ABOUT /WITH SHIPPING 10-14-24 NOTHING TO DO...JUST WATER (PH6.6)AND WATCHING THE PLANTS....... COPY CAT GENETIX STRAINS ARE CRAZY!!!!!!!!
Likes
3
Share
5.13.25. 2nd week of flower and she is drinking a gallon a day! Tie down has stopped and now mainly just defoliation and leaf tucking! Showing nice trichomes and has strong earthy smell already! Thanks for checking out my grow I have 2 more active grows now check em out! Enjoy the rest of week🏼
Likes
13
Share
Plants seem to have responded well to the flushing between week 14-15. They were flushed for seven days with nothing but neutral water to help with the nute burn. New nutes were added after that. Fan leaves are dying and buds are fattening. Checked trichomes and I’m thinking I will begin flushing this week. I’m hoping for a 10-14 day flush unless I start seeing a lot of amber. I’m feeling torn and may harvest the purple trainwreck plants at two different times. There are a lot of cloudy trichomes but there’s still lots of white pistils being thrown out as well. Didn’t see much amber, some buds have more clear trichomes than others. The clone’s buds appear further along than the mother plant. I may flush only one plant this week and start the flush on the other in another week or so. The widow x plant isn’t ready to flush and is growing strong. I accidentally left my timer on “on” when I left during a weekend during week 3 of flower. The widow x plant started to reveg a bit from the 48 hours of light. I forgot this happened entirely and for a while couldn’t figure out why the buds weren’t fattening... but I’m fairly certain that is why that plant stalled so long. So far no hermies or males! That was several weeks ago. I’m now on week seven of flower so I’m hopeful for a completely seedless grow. I will continue adding photos throughout this week. Harvested the bottom branches off to make room for my next flowering plant. I couldn’t wait any longer, it’s getting too tall and I’ll run out of room. This is the clone that was taken the same time as the flowering PT clone. It has been in a veg tent since being removed from the flowering tent. Buds from lower stems are drying and look good so far... Wet weight- .75 ounces~ 21 grams Dry weight- ~.20 ounces~ 5.5 grams
Processing
Likes
5
Share
Likes
9
Share
@DRO420
Follow
They have finished the final stretch and are showing some nice little flowers.
Likes
7
Share
@Krissci
Follow
Haven't done much with this... Shee look lovely.. All others done..just this strain left.. Onlyaugar water going forward
Likes
25
Share
@Dunk_Junk
Follow
Just watching and waiting for trichomes to go milky. They're still clear. Plain water from now on.
Processing
Likes
2
Share
@Cannatech
Follow
This week has gone again just a small amount of defoliation and watch those buds get fatter and fatter
Likes
14
Share
ALMOST TIME. TOOK A PEEK AT THE GERMINATING SEEDS AND SOME ARE POPPING OPEN. PROBABLY TOMORROW APRIL 23RD I WILL START PUTTING SOME IN THE SOIL👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
48
Share
Day 22 22/07/24 Monday Nothing new to report. Starting to see them beautiful fans appear that's all 😁✌️ Day 23 23/07/24 Tuesday Feed today, giving her straight all nutes Inc flowering nutes. I will update the dose as they grow and develop a bigger hunger. Video updates 💚 Day 24 24/07/24 Wednesday She was doing a climb, so I have topped her today 😁 she's strong I'm sure she will recover well 🤞 Day 26 26/07/24 Friday Plain de-chlorinated tap water pH 6 today, 1L. Day 28 28/07/24 Sunday Feed today with De-chlorinated tap water pH 6. She is showing recovery from topping now.
Processing
Likes
14
Share
@Finsfan
Follow
Strong smell and bulk to the colas. 70/30 orange:white hairs. Lots of milky trich's when looking thru a scope. Not many amber, if any, do I know we close. Thinking I'll harvest next weekend based on today.
Likes
8
Share
Los cogollos engordan a buen ritmo, la producción de resina también es buena. La planta más productiva está amarilleando en algunas hojas de la parte superior, podría ser un poco de estres lumínico, pero aumento ligeramente el fertilizante para sus riegos.
Likes
5
Share
I had the lights at the suggested level from the company we got it for seedlings and it started to burn them. We have a 750W LED light and it was set to 40%. We turned it down to 30% for the first few weeks.
Likes
64
Share
@Prof_Weed
Follow
Heute startet die Woche 7, hohe Luftfeuchtigkeit und hohe Temperaturen. Ist immerhin 10 cm gewachsen und supergesund. Hier und da mal paar Blätter und Mini Blüten entfernt und ein wenig Super Cropping.. Pre Flowering hat ein wenig eingesetzt. Die Madame Sour Jealousy von FastBuds soll nur wachsen nicht das blühen anfangen!
Processing
Likes
4
Share
Flip the script to 12/12 waiting on a small tent via amazon to put my MILF in so I do not contaminate the other ladies, clones are hanging in there hope they will be ready to go into flower at 21 days. I just potted up to a 5 gallon fabric pot. They were drinking so much they were dry in 1 1/2 days. gave them a mild feeding and a good watering did not want to give to much trans nuites this week as I just lolly popped and potted up on the same day they look healthy enough to take it but I did not want to over whelm them with the food. so the plan moving forward it to start spraying MILF A in her own tent while the others flower in the big tent then the clones will move in to the tent and flower for 3 weeks all the while spraying MILF A 2 times a day with the CS the hope is by off setting the clones and the mothers by a week the MILF at 4 weeks while have Feminized Polled sacs that will be ready to sprinkle on the clones the other to mothers will flower to completion be chopped and dried and the clones will go until the seeds are mature with in an extra week or two. Stay Safe🙏 I will post more pics this week end.
Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 17/11/2019 - Pot feels light and the is bottom dry to the touch time to water, gave her 1,5l of water PH 6.2 with 0.5ml Grow, 1ml, Bloom and 0.5ml Max Biobizz reduced the dosage from last time, watered util some runoff appeared. 18/11/2019 - Mixed another batch of Alg-a-Mic 2ml per liter to spray on lights off PH 6.2