Likes
Comments
Share
@Skully
Follow
🇩🇪 Zum trocknen habe ich die Pflanze in drei Teile geteilt und sie leicht vorgetrimmt (Fanleafs ab) an Kleiderbügeln im Zelt aufgehangen. 13 Tage bei 62% Luftfeuchtigkeit und 23 Grad 🇺🇸 To dry, I divided the plant into three parts and lightly pre-trimmed it (removing fan leaves), then hung it on hangers in the tent. It dried for 13 days at 62% humidity and 23°C. 🇪🇸 Para secar, dividí la planta en tres partes y la pre-podé ligeramente (eliminando las hojas grandes), luego la colgué en perchas en la tienda. Se secó durante 13 días a 62% de humedad y 23°C.
Likes
3
Share
Strain: Fast Buds – Mendo Guava Auto Grow Type: Indoor Pot Size: 3 Gallon Pot Medium: Peat Moss & Perlite Nutrient Line: Athena Week 7 Update She is really starting to finish up beautifully. Her buds have gotten noticeably more compact, and she's showing off a really nice array of colours as she reaches the end. I'm really happy with how this girl came out. At this point, I've started the flushing process and I'm giving her roughly one more week before chop. Now it's just about letting her finish up and enjoying those final changes before harvest. No issues to report she's made it to the home stretch looking great! Feeding Volume: 1.5L Nutrients: None flushing pH: 6.2 PPM: Low / water only Frequency: As needed Indoor Climate Conditions (Late Flower) 🌡️ Temperature: 20–25°C 💧 Humidity: 45–50% 📈 VPD: ~1.3–1.5 kPa And don’t forget to use my discount code ISLANDT for 15% off your next order at Fast Buds 🌿🔥
Processing
Likes
11
Share
Finally are starting to add on a little weight, they’re looking nice and smelling even better! Can’t wait for them to really ripen!
Likes
11
Share
04/01 all going well. nothing but some canopy maintenance LST type and some bottom flower sites removal from the lowest/first branches age wise. We're in the first stages of flowering. *UPDATE 04/03* Watered them both. *UPDATE 04/06* irrigation for both 1.7ltrs each rodi cal mag treated water.
Likes
21
Share
@MG2009
Follow
11/24/2021 First true leaves are showing, transplanted 7 jiffy pellets into their first pots. Should be good for a couple weeks. Interesting to see how all the single finger leaves are developing differently. 11/25/2021 Transplantation complete #8 potted up into a small pot temporarily, Will start feeding next week Mirimichi 901C One ounce (7.8ml) to a gallon. I am guessing (prediction) #2,#6 might be male. (Both are vigorous girls) But time will tell.
Likes
91
Share
@CANNASIM
Follow
RQS . STRESS KILLER AUTO CONCLUSION BEFORE HARVEST. Harvest time is here, choose to do a final post with how the girl looks after the final flush, so enjoy. If you are looking for a super resistant strain and easy to grow functional medical strain this is the one. She was given tap water, and used flawless finish for 6 hours then flush again, 2-3 times in this two weeks, expecting top shelf from her.
Likes
12
Share
He elegido una red metálica. Es muy fácil de instalar y permite un control eficaz de las plantas. El resto es igual a cualquier cultivo hidropónico. Subo el nivel de nutrientes cada día.
Processing
Likes
13
Share
Likes
22
Share
Day 11: Watered each plant with 0.1l with nuts 465 ppm, 987 us/cm, 0.9 EC Lights at 35% The strawberry banana seedlings was very late in coming out of the ground, I had to give the helmet a hand to get it out, through 2 or 3 drops of water. One of the seeds is not good, it grew poorly, I put a Gorilla Cookies to replace it, also from fadtbuds. Let's see how it goes Day 12: The strawberry bananas are recovering well, one of the seeds is starting to get normal leafs, sounds perfect Day 13: Watered each plant with 0.25L with nuts 480 ppm, 1027 us/cm, 1 EC Lights at 50% Day 16: Watered each plant with 0.3L with nuts 668 ppm, 1423 us/cm, 1.4 EC Performed foliar callmag while the lights were off
Likes
53
Share
@xbrico
Follow
D57/FD29 - Thing going grand with the Cookies so far (enjoying growing these Cookie Based Strains). Smell from it is divine! Touch a stem and its a lovely citrus smell left on you for ages! Noted in a previous comment, like a perfect sweetness, fresh lemonade. You'd wear it as an aftershave alright even!!! :P They're drinking a ton but not taking on as much feed (as I've come to expect now in flower) so dropped the base and bloom by 10% (same recommended ratio of 1:1) and kept the PK9/18 booster in there at what would be recommended strength for this week...its the same as last week but week 1 (week 4 of flower) of PK9/18 should have been double...didn't want to overdo it as when I used recommended strength 1st time I got it, it created some serious root zone acidification (Which could have been all the K getting used up but was a mare getting the pH up from 4.something every day!!!). Did my usual root flush/wash before adding feed as the EC had crept up to 2.2 (and I know from experience, that starts messing with your numbers if you don't wash that out right) and took about 50L-60L to get the tank to 0.3EC (base is 0.2) was was a lot of salt sitting on/in the roots. Had a ton of underscreen dead leaf to pick up and just cut some wee straggly offshoots (I know, bad idea this late in flower but they were basically dead/no nutritional value left so basically a bug magnet). Still waiting on Bluelab to send me the RMA approved pH pen...been 2 weeks now since the RMA was approved and still no postage - using an "essentials" pH meter and just dipping in Calibration Fluids between each feed add to ensure some accuracy (As you can see from my recipe page, I like to know what the feed does to the pH - also gives an idea on what they're feeding on when you see pH swings in a different direction that expected). Geeklight also got back to me. In all fairness, I've been dealing with them direct (Got the light fixture from Alibaba, direct from China - big gamble, right???) and they have been more than helpful. I have been telling them about the light randomly coming on at 5% (lowest brightness) and provided evidence; turns out someone else now noticed the same issue with the Remote App controlled variant too and they believed it was a loose control board/wire. They said they did some stuff and that fixed it but I also thought mine was fixed by forcing the dimmer to 0% and it still randomly happened (even though it didn't do it for weeks) so the other person may still get a surprise!! 😋 So, I took out the driver today, pulled out the control board and all wires seemed good and no looseness in the control board (although it does look slightly bent as the Spade for the IR/UV switch isn't fully bedded in). But, like I say, in all fairness to Geeklight, they're posing me a new control board tomorrow from China AND giving me the longer driver cables so as I can put the driver outside of the tent! Give me a bit more room for my Flower Initiator (and hopefully UVB Tube) and great to see them honouring the Warranty. RHC Seems to be flowering nicely as can been seen from the pics. Stacking well, buds coming along. Slight pinkish tip to the pistils on some buds but not the shocking pink as you'd see in the sales pics...hopefully it goes there though! Also noticing a bit of an early frost on a few flowers...like real good frost! And this is only day 1 of week 5 (I know, I do this diary arse about face)!!! Hoping Geeklight get this driver control board and longer cables to me quick so as I can get the driver out of the tent as I'd really like to get the UVB in there to frost them up in a week or 2!!! May only be getting about 9" clearance though so dunno, could be dangerous!!! 12" is the lowest recommended...but then, I could do the 15 min burst lighting (On 15, off 45 min every hour) so lower the risk of burn but get them more exposure (but lowers the lifetime of the tube). They get UVA from the LED's on the light at the moment for a 1/3 of the day and have been since early veg so should be hardened to it by now!!! Anyway, think that's enough s**te chatted by me!!! Happy growing all!!! 💪
Likes
49
Share
Average grow maintenance effort, slow growth, small canopy but not really any issues. I will update all the weights, taste and all that crap soon.
Likes
11
Share
This is my 2nd ever grow, went from seed / soil to coco / clones LOL (If I can organize my first grow pictures I will upload that at some point. It was definitely a learning experience and I dealt with mites and a hermie but managed to beat the odds and came out with some amazing bud - all from bag seed.) *** Clones purchased and replanted same night Feb 28, 2021 @cloneguyindustries **** - HEPA FPR 10 filter installed in the only air inlet at the bottom - Using AC Infinity Cloudline T4 - 4" exhaust with digital controller (thermometer / hygrometer) and carbon filter - 1 bluetooth thermometer / hygrometer - 1 8 inch fan above lights running 24/7 - 1 dehumidifier running 24/7 - 2 cameras - one monitoring inside the tent and one the AC Infinity controller outside the tent so I can check them on my phone wherever I am - I am not measuring / monitoring my EC, PPM or VPD levels - 3 gallon felt pots - NO TRANSPLANT GROW 🤷‍♂️
Likes
49
Share
@Roberts
Follow
FBT 2401 is flowering nicely. She has a very perfume smell at the moment. Lots of trichromes forming. She is just starting to bulk as well. Nothing else to report. Just doing my best to save a mess up. Thank you Medic Grow, Athena, and Fast Buds. Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
13
Share
Second week using the humidifier on and off as I don't have an automatic way to control it yet. The leafs seem to be quite foldy, but overall looking healthy.
Processing
Likes
8
Share
@XiceX
Follow
Week 7 . There are two Monster in the garden 🍀🍀🐉🐲
Likes
14
Share
@Smile_gan
Follow
At week 13 of Pineapple express. It nearly to finish. I think her will ready to harvest in next week.