Likes
Comments
Share
@GeminiCQC
Follow
As we enter week three, the stem is hardening on the fantasmo as she likes to flop over. No signs of any weird stress other than that plant flopping over, but the Mephisto's wedding is doing its own squat little thing.
Likes
11
Share
Hi, nice to have you here😊✌️ The FatMonkeyAuto is doing well 👍 Unfortunately, it has grown really tall. Which unfortunately leads to slight chlorosis on the upper leaves! Hope she can handle it without drying out at the top 🙈 We'll see 😅✌️ Thanks for your time 😊👍💚
Likes
4
Share
Sorry for the late update I had a little problem I could see yellowing and I was thinking what’s the problem. My ph pen messed me up big time
Likes
37
Share
@Regenwurm
Follow
Jeden Airpot mit 25 l Wasser pH 5,8 geflusht. So lange bis der Drain auf ca. EC Wert 0,25 lag. Dann anschließend 3 Tage nicht gegossen. Die Lady hat jetzt Herbst und alle Blätter verfärben sich in hell grün, gelb, lila! Die Trichome sind nach wie vor trüb! Keine Entdeckung von braunen Trichomen, dies ist auch nicht gewünscht. Es soll beim rauchen ein schönes aktives high entstehen, nicht zu stark. Aufgrund der Unterschiede zwischen Tag und Nachttemperatur sowie der geringe Luftfeuchtigkeit von ca. 35 % Feuchte entsteht Harz ohne Ende. In 3-4 Tagen wird geerntet😬😬😬😬 ich bin aufgeregt
Likes
19
Share
@Naujas
Follow
Amazing!!!!! a wonderful girl, she managed to keep herself so beautiful and strong :) she was not visited very often :) the house has a wonderful smell of tropical fruits :) Thanks to Dutch Passion for the opportunity :)
Likes
17
Share
Processing
Likes
Comments
Share
Likes
19
Share
Been a week now since the topping. Will let them recover for another week and then will do the second topping. #2 catched up with #1 and even seems to be surpassing #1 in growth. (Can be related to removing some roots of #1 last week) D29: Switched the nutrients for plain water with lowered PH to flush since the leafs are curling down which could be due too much nitrogen. Will put nutes back on day 31. D30: Used RQS bending clips to do some early Low stress training. Wanted to go for a mainlining technique but changed my mind eventually. Instead of mainlining I will do 2 toppings and LST to create 8 main cola’s per plant.
Likes
48
Share
🚨 Blue Dream week 11 update 🚨 🚨 week 7 of flower!! 77 days old!! 🚨 So this will be my last feed post 4 these ladies!! I will begin flushing this coming up week!! Was disappointed in the first weeks of flower as she wasn't producing much but as the weeks have progressed these ladies have packed it on!!! Low stress training clips- @madmadameplant @madmanplant Www.madmanplant.com Other companies in this grow- @foxfarmsoilandfertilizer - 100% ffof @acinfinityinc - fabric pots @generalhydroponics - flora trio line @vivosun.official - inline exhaust fan @opulent_systems - 4x4x80 grow tent @fastbuds_genetics - 4 Blue dream seeds @inkbird_official - temp and rh controls This was my feeds 4 the week!! I will begin flushing from this point on.... 2/22/2022 2ml micro 4 ml bloom 1/4 ml ph down Ph 6.41 420 Ppm Solution temp 75.9°F 2/26/2022 2 ml micro 4 ml bloom 1/2 ml ph down Ph 6.40 400 Ppm Solution temp 76.5°F Well growers thanks 4 stopping by 2 check out my grow!! Till next week. Best of luck and Happy Growing!🌱💚💨🔥🔥🔥
Likes
55
Share
@valiotoro
Follow
FBA2507 Super soil finito✔️ Trichomes 15% amber🔬 Buds rockdense⛰️ Families fruity & sweet🤤 Head notes peach & mango🍑 Heart notes citrus,sweet & floral🍋🍭🌸 Base notes vanilla & tart crust🥧 Light soil it’s the last week🤩 Coco same feeding,watering 2/day🔥 Have a good wk😎
Likes
2
Share
Second trasplant for uniform root development through medium Medium was cocos premium, leaved all time getting rain during winter and noticed an improve in natural fungus presence
Likes
116
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/07/21 👋😺Hi grow family!! We're beyond excited to try out this new MarsHydro LED for our latest grow, the SP-3000 is INCREDIBLY bright!! ..I have never seen a light more appropriate for a 4x2 tent in my life, we (happily) replaced 3 "600 watt" blurple LEDs with this single rig ( something we've wanted for a very long time). There should be no issue achieving perfect coverage, corner to corner with this light. Its been years since we've flowered under LED ( and never one of this quality), we're a little bias towards HID/CMH, especially my hubby but I think this might just be the LED that changes our mind! We'll be growing Gelat OG Auto by Seedsman (we've heard amazing things) for our first grow under the SP-3000, all plants in 5gl fabric pots, Promix-B (25% perlite) on a 20/4hr cycle. We're starting with 4 plants but if they become unmanageable, we'll move one or 2 of the plants to another tent. We use a glass of water and a paper towel as our germination method. We soak seeds roughly 24hrs and then in a wet paper towel for another 12-24hrs, we average roughly a 90% success rate doing it this way... Thank you for reading if you made it this far and happy harvests everyone! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -No-fan design: the SP-3000 uses an aluminum heatsink, and the driver can be removed then placed outside the tent🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/10/21 🤘😺 100% germination!! All seedlings have broken the soil today.. I'm so in love with this light!! ❤️💡🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
17
Share
@BLAZED
Follow
Week 6 (6-3 to 12-3) 6-3 Temperature: 27.6 degrees (lights on) 19.4 degrees (lights off) Humidity: 61% (highest) 40% (lowest) Watering: None. 7-3 Temperature: 27.1 degrees (lights on) 19.6 degrees (lights off) Humidity: 52% (highest) 39% (lowest) At the beginning of the day i made a 15L feed and gave both plants a 1.5L topfeed, and i removed some leaves underneath the canopy. Later that day I installed the AutoPot reservoir and attached all hoses to the pots and reservoir. The airpump is connected aswell, and on a 18/6 timer. I added the remaining 9L to the reservoir and turned on the system. At the end of the day i added another 15L to the reservoir. The light is at 80% with an distance of 45/50 cm. LUX: 24.000 / 26.000 8-3 Temperature: 26.1 degrees (lights on) 19.5 degrees (lights off) Humidity: 54% (highest) 40% (lowest) In the midday i turned off the reservoir, and at the end of the day the AutoPots were dry. I installed a SCROG net aswell that i bought a couple of days ago. The holes of the net are too big, so i will order another one with smaller holes, but for now i will use the bigger one. I disconnected the 18/6 timer of the airpump, so now it runs 24/7 on full power. I checked the PH of the reservoir and it went up to 6.3, so thats quite high, i added some PH- to 6.0 Light is at 50 cm. LUX: 23.000 / 24.000 9-3 Temperature: 26.3 degrees (lights on) 19.7 degrees (lights off) Humidity: 50% (highest) 41% (lowest) 10-3 Temperature: 26.7 degrees (lights on) 19.4 degrees (lights off) Humidity: 59% (highest) 43% (lowest) No pictures. The reservoir was getting empty, so i turned it off. 11-3 Temperature: 26.6 degrees (lights on) 19.4 degrees (lights off) Humidity: 58% (highest) 47% (lowest) Added 15L to the reservoir. 12-3 Temperature: 25.9 degrees (lights on) 19.2 degrees (lights off) Humidity: 58% (highest) 46% (lowest) No pictures.
Likes
7
Share
Just been chopped toon al the lower branches off and put them away separate but will update on the total yield
Likes
14
Share
~ FASTBUDS TESTER #2202 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged roughly 24 hours later. 12/3- Today their tap roots were about 1/2 to 3/4" so at 11 am I transferred them into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened and the #2 isn't far behind! 12/5- Well this is the full Day One for the #2 FBT #2202 and the second day for her sister! I'll keep them in the covered/heated Jiffy tray until I see their roots beginning to emerge from the peat pellet, then I'll transfer them gently into their respective fabric pots. The #1 will be going into the 4g Gronest pot from FastBuds and the #2 will reside in a 3g pot by Wraxly, which I'm trying out for the first time. 12/7- Yesterday I checked the #1 tester and she had roots starting to emerge from her pellet so I transferred her into her 4g Gronest pot. After making a hole in the medium for the peat pellet, I coated the entire surface with Xtreme Gardening Mycos then placed the pellet in the hole and planted her in. Lastly, I watered her in with about 4oz of de-chlorinated water with 3ml/g of FishShit added which was then ph'd to 6.4 @ 75℉ after which I placed a humidome over her for 24hrs to ensure that the humidity stays constant. The #2 tester is doing great and I'm confident that she should be ready to transfer into her fabric pot in the next couple of days! 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
12
Share
@Pedro_88
Follow
Estoy muy satisfecho con el crecimiento de mi chemical bride, ayer hubo un fuerte viento y tumbo a mí watermelon skittlez no la pude encontrar, pero ya tenemos otra en proceso que verán en estos días
Likes
39
Share
What I could call a successful LST. The plant was lush from birth and having to keep myself low and to experience LST I tried one of the first times that I am very good at. The main cola is not huge but from there to the immediate vicinity there are scary inflorescences. The sides a little bit for the FImming a little bit for LST that distributes a little even for the strai are not bad at all, bigger than usual and with a delicious appearance. I am supporting it with a system of wires but there is maybe it could be done alone it is not to be touched and very much I do not know if next week I will take the photos but between two surely yes, flush started a great harvest is coming soon.
Likes
34
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Week 5 of flower!! These girls are looking so much happier since getting some overdue calmag.. Buds have grown a ton since last week and I'm a huge fan of the spacing.. Both the Gypsy-Kush plants look identical.. we cleaned the base of new growth on all plants and removed a few more large fans from around the tops.. Light penetration couldn't be better... The Solux350 is kicking ass! Its incredible how something so small (and at 75%) can light up an entire 4x4 .. these plants are getting plenty of light and at 14".. not too much else to report its been a stellar week! Thanks for reading if you made it this far and happy harvests folks!! ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
3
Share
Plants are still getting pure pH water 6.3
Likes
174
Share
Tag 63 Blüte: Die Trichome sind immer noch zu viele Klar und brauchen noch einige Tage. Geruch wird immer intensiver. In 4-5 Tagen fallen die Temperaturen auf 16-18 das wäre perfekt wenn ich da ernten könnte und die Trocknung so verlägert wird. Momentan sind wir bei 28 also viel zu warm ohne Klimaanlage. Der nächste Report wird dann der Tag der Erte wann auch immer. Ich habe nach den vielen Kommentaren euch eine volle Runde Budporn Fotografiert. Ich hoffe es gefällt euch.