Day 70 - Seed 2 is almost ready, now on a bit lighter feeding, the nuggets are looking frosty 😁 Seed 1 the buds are getting bigger and bigger 👌

Sorry not many pics this week, struck down with man-flu! Few pics of the new 600wt lumni fully adjustable light I picked up and have replaced one of the smaller kingbo’s with it, thought about having the two kingbo’s either side of this lumni but I really didn’t wanna forfeit the 400wt cobs! Also bought another double output air pump, so going into flowering phase, watt/plant ratio has increased and so has aeration to the air domes inside the smart pots. I’ve also added a small water pump to the nutrient tank to keep it moving/oxygenated while it’s waiting to feed into the drip tray.

Vamos rumbo a la cuarta semana ya Ya está empezando a tener un olor débil

Compare the airpot roots versus the normal pots. No root circling. and the plant is bigger although that might be genetic. Perhaps it is due to the roots being able to get more oxygen Transplanted late in week 3 into bigger pots,,, just water, no nutrients

Today I top dressed everyone with a full strength feed of nature’s pride bloom, compost, added bacteria, kelzyme calcium and a handful of promix. This will be the last feeding for both the blackberry breaths. It looks like everyone else is going to go 9-10 weeks so they will get 1 more feeding. Either way I’m going to harvest everything at once so the bbb’s are going to get extra ripe. The frost on the one pheno is insane. Smells are amazing so far too. Will report smell after drying. I just grabbed a full organic nutrient line for use in my next run. I got more of the nature’s pride veg and bloom dry amendments, boogie brew tea, kelzyme xx calcium, EM1 microbes and method 1pps spray. I will also be using Alaska fish emulsion (5-1-1) worm castings, WOW mycorrhizae and a pre inoculated 50/50 coco promix blend. Seeds came in!!! They hooked it up fat too. I got the 12 dolato seeds I ordered plus Slurricane F1 x6 and puro loco x6. The puro locos are going to be used for outdoor and I might do a little pheno hunt of the slurricane this year. The F1 is supposed to be better or more likely to show genes from both parents. Can’t wait! So today I forgot to water and it really looks like it shocked them... they all drooped like crazy and yellowed out more. I got them all watered and raised the light to ease some of the stress. Worst time possible to forget a watering!!! Won’t let it happen again. I was reading that PPFD levels over 1000 require added co2 and my light is well above 1000 at 8”. That could also be another reason my plants yellowed out so quickly. Next round I’m going to up the nutes and get one of those bottles of co2 and see if they make a difference. I would have to keep my filter on a timer so it wouldn’t deplete so fast. Or just use it for the parts of my grow that doesn’t need a filter. I didn’t even need the filter until week 3-4 of flower. I cleaned the sock on my carbon filter and now it’s just sucking the life out of my tent. The humidity went from being too high to being too low. Going to lower the speed until the humidity is proper. This tent isn’t that old and that filter sock was disgusting. Going to try stablizing my RO water with a bit of snow in the winter and rain in the summer

Week 9 (27-3 to 2-4) 27-3 Temperature: 25 degrees (lights on) 18.9 degrees (lights off) Humidity: 63% (highest) 55% (lowest) Added 15L to the reservoir. 28-3 Temperature: 25.1 degrees (lights on) 18.5 degrees (lights off) Humidity: 64% (highest) 56% (lowest) 29-3 Temperature: 27.2 degrees (lights on) 19.4 degrees (lights off) Humidity: 67% (highest) 48% (lowest) As you can see on the pictures, the Chemdog #2 has a flat stem. I dont know how, but the same happened with the grow before this one, but to a Biscotti from a different seed bank. I never seen this before, so i am really surprised to see this happening back to back. Does anyone know if its just coincidence or can lightstress or LST/HST cause this? 30-3 Temperature: 25.3 degrees (lights on) 20.5 degrees (lights off) Humidity: 65% (highest) 54% (lowest) 31-3 Temperature: 25.8 degrees (lights on) 20.8 degrees (lights off) Humidity: 62% (highest) 56% (lowest) Today i decided to turn of the reservoir/autopots. I think the plants are overwatered, and because of that probably have light stress and other problems. Also, it can be that i underfeeded them, and that the PH was too high. I turned the light down to 40% strength aswell. 1-4 Temperature: 23.6 degrees (lights on) 20.6 degrees (lights off) Humidity: 62% (highest) 57% (lowest) 2-4 Temperature: 22.6 degrees (lights on) 19.8 degrees (lights off) Humidity: 62% (highest) 56% (lowest) No pictures.

The breeder says day 45 is the day for harvesting.. when I reached that day I started looking closely the trichomes to see when best day to harvest.. usually I wait till more less 10%amber.. however I found a bud rot in one of the other plant on my tent so I decided to chop it down on same day afraid of spreading it to Apple blossom. If that had not happened I would wait maybe 2-3 days more.

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Lst tranings return Day 30 Grow powder 2gr/1L Short Flowering 2gr/1L 800ML Per Pot Day 32 No Nutrients 800ML Per Pot

they are all thriving, growing exactly as i want them to. sucking up everything i give them and they are on daily feeds. some of the autos are starting to flower, but im gonna stretch out veg for atleast another 4/5days for photoperiods. they are ranging in height between 45 and 75cm. west coast OG auto from fastbuds been the tallest at the mo. dinafem cookie strains showing preflowers now and everything going fine. no problems as of yet in the slightest. daily updates.

Dense like a rock, wait for drying

Everything is good, they were a little hungry this week and lost some lower leaves due to mobile deficiency but I did feed twice and problem resolved itself. I plan to defoliate the canopy to some extent this week. Light is at 100% now. Mimozz is smelling sooo good - it's crazy. I love it and can't wait to try some rosin from this strain. On the other hand - Strawberry Cough is not smelling at all. The rest of them are smelling good but nothing special to report :) Till the next week, cheers!

Le bambine crescono bene per essere una varieta veloce la quick one e bastante lenta 😐 forse perche gli sto solo dando 12 ore di luce ...perche comparte spazio con 2 fotoperiodiche

Uma estrutura muito linda essas pequenas árvores da Mirtilo, muitos galhos, muitos botões surgindo um caule bem forte para passar bastante nutrientes.

Hello my friends 👨‍🌾👨‍🌾🌲🌲, All was fine thiw week, Buds are more and more fat! I've continue to give pk 13-14 this week, I'll probably give one more time this new week after back to canna boost accelerator. Humidity was nice all the week between 45_55%HR, this Sunday back to 60%. Hope will down again with nice weather. I've given 2.7l water/plant -Water + rqs bloom tabs + sugar royal -Water + pk 13-14 -Water only Ph@6 Thanks for like, follow, good vibes, let me really happy, for suport my friends ❤️👨‍🌾🌲, With your all positives vibes I've been contacted by mars hydro this week, I'm so happy, Thanks to @marshydrococo 😘😘 And thanks to @royalqueenseeds for all this nice seeds 😘😘🌲🌲

Added a second scrog net for the taller plants last Friday. Constantly defoliating to increase light penetration but not trying to stress the plants. (Selective leaf picking) Plants loved the tea I have them last week. Visual improvements in every plant 2 days later. Top dressing later this week on 9/29: 5 tablespoons Gaia green 444 5 tablespoons Gaia Green 284 15 tablespoon Wiggle Worm Earth Worm Castings Light increased to 75%

Finally all got rid of their little hats and are looking healthy. TD 3(drooping cotyledon) needed a bit of help so I removed the seed shell with tweezers. Note: The Mycotrex is listed as nutrient because it resides around the shell and than again 10cm below it. 2020-11-12: 1l nutrient solution with 0.5ml of Bia Canna Vega since the soil is Light Mix without any nutrition. I also lowered the light since they were stretching a bit. Light at 25% intensity. 2020-11-14: 300ml ph adjusted water each 2020-11-15: Raised light intensity to 50% 2020-11-17: 300ml ph adjusted water each TD1: 7cm TD2: 5.5cm TD3: 7cm

8/9 88,88% germination

Overall, I am extremely happy with the genetics of the Auto Euforia and the general success of the grow. I always like to reflect on mistakes I have made, so let me lay them out here: I overlit the plant during veg, contributing to it's bushy nature. It grew well but this would be a waste of electricity if I was growing more commercially. During the last week of flower, my region of Ontario was hit with tons of rain and humidity. I took some steps to increase circulation of dehumidified air, but lowering 95rh to 65-70rh is still insufficient and I lost some control of the environment. The awful result was the start of mold in some select areas, particularly in the fattest buds and where leaves were cut away and petioles remained. This issue is not due to Dutch Passions great genetics, and is entirely due to a combination of an unseasonable environment and my own overconfidence. This mold was never clearly apparent on the outside of the buds, but I found it will trichomes scouting under magnification. This forced me to speed up the harvest and drying process. It also means that I have had to carefully grade the buds into those safe for smoking and vaping, those mold free but needing a second examination (will be rosin pressed), and those close enough to spots of mold to be only for for edibles. Any moldy bud was of course cut away and will be disposed of. Nevertheless, I have many ounces of fantastic buds, and will be making some nice pressed rosin based 510 cartridges. I will edit the harvest post with more information after the cure, and showing the various processing I will be doing. Happy growing! 🌱

This is my wife’s and I first grow and we’re really excited about it even though we’re on a super budget! Here’s a few tips about our set up: Our MarsHydro 1000 Broke So we’ve been using multiple factory in workshop LEDs and lights to ghetto rig a budget late set up. Any advice would be more than welcomed!