Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++

Welcome growers Third week of life ended for this this little CREAM CARAMEL 🍬🍭🍫 She still growing in a growbox, 120x90 (cm) with nine other ladyes of different genetics 🌿🌿🌿 Looks pretty happy, great vigor and big leafs 🍁 Earlier in the week I transplanted into a 3l plastic pot.. Usually my choice of pot is the smartpot or the airpot 💯 And so, considering that the soil will obviously remain less aerated than usual, I have chosen to use a greater quantity of coco coir in the substrate I roughly prepared a mix of 50% light-mix (Canna professional and Biobizz), a 30% of coco coir (Atami), 10% worm-cast or humus (Atami) and around a 5% perlite wich it's already present in the light -mix.. I have also put a few micorizzae (Micosat F), like 10 grams, in direct contact with the roots and around 4 grams of Microlife (Bionova) in pellet form I will use this last one also for making an areated Tea, but during flowering.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. Root-Juice (Biobizz) and Rizostimo (Biomagno) for the last time, plus a little bit of silicium (Bionova) and then Activator (Biomagno) / Crescita (Biomagno) / The Missing Link (Bionova) / X-Cell (Bionova) {This last two i have used in a foliar spray solution} Simply a little bit of everything at any watering 💧 About the lights 💡 I currently using for the first time, two Mars-Hydro SP3000, running at 25% of the power for now.. Next week im going to increase at least to 50% ⬆️ Onestly this lights looks pretty solid, definetly intense, with a spectrum really close ro the sun light One of the cool things about it it's that you can connected each one toghter with a cable and so you can controll the intensity of the lights very easy, in a precis way 👌 We will see in this months how they works And that's all.. See you at the end of week n°4 📆 Thanks a lot for reading, hope you enjoyed 😎👍 FC ✌️ 🇮🇹

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

Transplant to full soil. No pot involved anymore. Their in contact with mother earth. 🍀🍀🍀 These 2 girls have a bit more stress because of the transit. Still grew like 10 cm. 🍀🍀🍀

Week 16 (Harvest) 30-1 First day of darkness. Temperature: 27.9 degrees (lights on) 18.8 degrees (lights off) Humidity: 65% (highest) 48% (lowest) 31-1 Second day of darkness. Temperature: 24.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 65% (highest) 50% (lowest) 1-2 Drying day 1 The Saparot is ready to be harvested! Before chopping her down, i took a lot of pictures. I was able to remove most of the soil to see the rootball. I hang plant as a whole to have a slow dry. The exhaust fan is on setting 4. 2-2 Drying day 2 Temperature: 19.1 to 17.5 degrees Humidity: 62% to 57% I changed the exhaust fan to setting 2 because setting 4 was a bit high in my opinion. 3-2 Drying day 3 Temperature: 19.9 to 18 degrees Humidity: 62% to 59% I changed the exhaust fan to setting 1, as someone told me that it was enough air movement for drying. 4-2 Drying day 4 Temperature: 19.8 to 18.5 degrees Humidity: 62% to 59% 5-2 Drying day 5 Temperature: 19.9 to 18.8 degrees Humidity: 62% to 59% Today i checked on the drying plants and the buds are shrinking a bit, they are getting a little bit crispy on the outside aswell, I hope they wont dry as fast, and i aim for a 12/14 day dry. Cant find the temps for 6-2 to 2-13. I do have a video when she was at the half of the dry process. 14-2 Trim day, yay! She was easy to trim, the buds are nice and dense, and there was not a too high bud/leaf ratio! She dried for 14 days. End results: Dried buds: 81 Grams. Dried Trim: 18.5 Grams. I am really surprised how good these genetics are! If you like CBD, i really suggest trying JYM Seeds out! The Saparot smells very fruity almost like a fruity coctail. The buds are super dense, and very bag appealing. After some months of curing the sweet fruity smell changed to a more sour smell, but still smells amazing! To be honest, i cured her a bit poorly, burped too less, and because the buds are so compact she holds moisture better then normal, so she tastes harsh, but thats on me. I have a pack of JYM's Sour Fruit aswell, so i will for sure try it out again! And my hope is already very high :D Thanks for following my diary, and feel free to check my others out aswell! See you at the next one!

Сорт 707 проста шок, во время веги при хорошых условиях растение чустаует себя прекрасно . С 1 дня роста проважу много процедур LST Cropping Topping . Что касаеца перевода в цвет ну очень долго переходит жду ужэ 7 дней :)

to mutch cold here 2 week with low temps at night cicle betwen 12 &16 graus in europe. maybe this is the reason of that purple orange colors (:

All good here. Except for the fact that I might not be LSTing correctly, oh well this is my first grow so...😺👍

Smells getting stronger, flowers getting fatter, pistols starting to turn amber, we are getting closer to harvest, plants all nice and healthy the excitement grows the wait goes on but theyll soon be ready cant wait thery are looking really well, see you next week for the latest update ✌️👊 few of us closing in on harvest now with barneys new mimosa evo and cant wait to see the outcome, goodluck to all others with your harvest as well

We are still smooth sailing with these ladies. All I am really doing is watering and maintaining my environment at this point. Keep humidity low around 45-50%. I do have foxtailing on 2 out of 4 of the cultivars, which is somewhat interesting. Based on the trichomes, these ladies are roughly a week out from harvest. They are packing on weight like crazy. I will say, the cultivar I chopped early seeemed like it matured much faster compared to these other 3. Either way, the tent is smelling very citrusy. Thanks for stopping by, commenting and liking! Until next week growmies! Reap what you sow and smoke what you grow!

25g de Easy Grow Booster par pot de 11l durant le rempotage

Week 9 started on May 29, 2022 This week is gonna be the last full veg week. I added the flowering HPS light to the side where the cola was injured, plants love the HPS so I figured why not, I'll ned it during flower. Of course that raised tent temps a full 3-5 degrees, had to change some ventilation parameters, fan speed went up on both in tent, and on the a/c infinity. I also cleaned the screens, and opened another vent at the base. Fans are on. The plant has done very well. Added Foop spray into the mix and so far so good, I see that it has slightly improved the plant in a short period, and it smells pretty good, took it to the garden for more trials. Dudes at AutoPot USA fixed my stuff!! Thanks guys. The fix they troubleshooted worked. My res is below 300 ppm and at 69 degrees F I have Fox Farms Bloom diluted and Bio War Flower crushing the biologicals - after I fixed the leak issue, I figured why not feed her while she gets her finals sea legs for the flower trip ahead. Nothing crazy, I run stuff diluted, especially when I am dialing my light pre flower, I can't risk burning them with heat or nutes. I am a tucking fool, a bending fool, and a foop spraying fool this week, you guys are not gonna believe how many fan leaves this thing put out in seven days, and I took off a significant amount mid week 8, I was a bit worried, oh well, never-mind this is White Widow, she doesn't care, all she wants to do is bust outside in jungle in South America

Daaaayum hot week last week, worried about 2 plants showing some wierd main buds, but it’s hopefully the heat. Smell is pretty nice and got some juicy fruits growing on them trees! ❤️

Let me know what you think 💭

Introduced low stress training to the plants. Notices some nitrogen toxicity so cut out the gro to utilise the nitrogen from the micro & bloom. Spray the canopy lightly with the canna cure.

Started out pretty slow, then blew up like crazy during preflower before running into deficiencies followed by nute burn. In the end I switched to organic nutes and she came out great! Big frosty purple buds consistently ping pong ball sized. Smells like straight skunky oranges. Although this took a really long time for an auto, I would grow this again!

ГОЛУБОЙ СЫР пришлось реанимировать, пересадил в другую землю,вроде бы болезнь неспеша проходит,но у растения приторможеное развитие,

Problemas com mofo no substrato e manchas nas folhas 😐