All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

one of the plants was eaten by snails 😕☹️ i have a spare of the same strain that hatches in pellets

🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)

this plant is in Fox Farms Ocean Forest soil and will get straight de chlorinated tap water til week two veg.

28/12/20. inicio de semana, 75 cm de altura hoy se aplico un nutriente foliar marca mexicana Rootz kelper son un extracto algas y azucarez y se aplico por riego giga grow. este contiene guano de murcielago sesacaron esquejes de ramas bajas todo organico. 30/12/20. hoy se rego con forzasilicia un fertilizante organico de una marca mexicana muy buena en mi pais se puso una estaca de madera para soporte 01/01/21. hoy se aplico un nutriente foliar marca mexicana Rootz💪 kelper son un extracto algas y azucarez y se aplico por riego giga grow. este contiene guano de murcielago 03/01/21. cierre de semana

Week 2 of flower, RO water change with an EC of 1.3. Will adjust from here and observe the next day or two. Although you watched as I did a major defoliation, as you can see, they have bounced back pretty quickly. As of now, I will be defoliating every few days just to keep the light penetrating the canopy so we have some nice buds come harvest time. Will be back to update in a few days to update where they are at and if they need more nutrients. pH is set and stable. Stay tuned until the next update and follow my YouTube and Instagram (Link on growdiaries profile)

She has stretched a lot more than I thought she would! Day 18 of flower and I believe we’re done stretching from here on out. I defoliated a bit so some of the lower bud sites can absorb some light. Also gave her some nutrients this morning. Onward to week 10 ✌️🏾

420FASTBUDS-Week 5 Strain:FBPHP01 What up grow fam. Weekly update on these girls. Finally the weather is nice enough I transplanted them into there final 4gal pots and put them into the greenhousefor the season. Got my drip line all hooked up and so far seems like it's going good. All in all Happy Growing

Swelling up and right on track for a good result, still showing signs I pushed them a little hard with the tip burn but nothing I can do about that now

She was extremly fast and ready to harvest after 55 days of flowering. Smells a bit like ripe grapes.

empiezo a aplicar finalpart para acelerar la maduracion de las flores, hay alguna un poco mas retrasada y otras que ya estan practicamente hechas. no parece que vaya a haber mucha produccion pero si calidad. el olor a citrico es muy intenso

😍😍😍 its that time again already!!!! the flowers are coming on very nicely. I did the yoga session and get all the under canopy trimmed up. So tricky without being able to get to the back middle from the front but well worth the effort. I should film it one of the times hahaha only have to do it once a harvest but damn. anyways.......I made my own co2 mix this time, had enough lol all it is, is 2 cups of sugar and some yeast lol no need to pay $28 a batch for it, man i feel silly now. got the co2 in there and started using a new terp and resin enhancer called, well, resin lol this stuff smells even better than terpinator some how lol definetely excited to smell and taste the results. Continued with the microbiable mass every 2nd week and also got rid of the pully things i had and did a hard zip tie to the beams so i could raise the light up another 4-5 inches. This should help the outer perameter get some extra light it was not before. All in all, i'm very happy!!! the scrog is even better than last run with almost the whole tent absolutey packed. though there is still some room for improvement of course! left is SLIGHTLY more bushy canopy up this run to see if i can increase the yeilds with a new strategy. Thanks guys!!! next week i should start having some beautiful flower pics

Miracle Berry Remix #1 and Mango Smile are throwing preflowers and stretching every day. I removed the scrog tent for now to get a little more vertical action going. I probably defoliate too much but I'm obsessed with getting light to bud sites...so I dunno. UPDATE: I clearly didn't. They responded very well over the rest of the week. They really took off. Strawberry Nuggets has some nutrient burn on the new growth. Looks fine though since it hasn't progressed. The SN canopy is going to be really nice. I moved the Bodhi's to a new tent. I super crop pretty frequently as well....I also did some serious LST to the CDLC since her node spacing is so tight. Light wasn't getting anywhere.

Upgraded to a Sanlight 1.5 Evo 4 120 and its such a lovely piece of engineering! I reallly love it! Imo its worth every Penny, especially for the lengthy grow tents like my 120x60 (4x2). Gave another dosage of the organic phosphor flower booster. I got kinda scared about botritis/bud rot because she was su bushy snd had overlapping bud sites…. so i defoliated her insides pretty rigorously. Maybe not the best for autos but id rather have sloved growth than a moldy crop lol. Some buds really look very thick and resinous but some lack a bit behind. Day 63: removed a few more leaves but i hope the airflow in my tent will help me to keep avoid any bud rot.

Here we are. At the end of week 7. This cultivar is scheduled for 45 days but at day 49 I can confidently say she is not ready yet. Thinking another week and she should be ready. All is looking good and these girls buds are super fat! Especially for Humboldt. The smell isn't as intense as I'd like but still there. A sweet smell. Still defoliating as I can and as needed. Getting watered daily or every other day. Here's to the home stretch! 🍻 Lights at 100% power. Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/