Recommended
Likes
Comments
Share
Likes
82
Share
Hello growmies! Welcome to week six of An Epsilon Adventure! Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow! So here we are at week six and every one of these girls are at a slightly different stage, it is quite fascinating to watch them develop one after the other. Today I made the last adjustment to the light possible. I removed the adjustable hangers and affixed a carabiner which I tightly tied to the top of the tent bar. There is about 1.5 inches of space between the top of the shade and the tallest part of the roof of the tent. Plant 1 is already taller than this, and it looks like plant 6 and maybe even plant 5 are going to join it. It's a madness. I am sure you have already looked at the photos but just in case you do what I do and read the diary first... Here is my assessment at the beginning of week 6: Plant 1: Height: 1st (137cm) - what can I say about this ridiculous plant? Day 36... 137cm tall. I have had to raise the light to as high as it is physically possibly to raise it and it's still not high enough. She is done stretching now, she may add 3-5cm over the next week or so but I don't expect more than that, so her top of her main cola going to have to develop above the level of the light. Nothing I can really do, nothing wise anyway. What a monster plant. Maturation: 4th - early into flower - bud sites developing, pistils just starting to explode. Plant 2: Height: 4th (111cm) - this plant has been there or there abouts as the tallest plant for most of the grow, but she has topped out at 111cm. She will gain some during flower but not much more than a few centimetres. Very impressive plant, loads of bud sites, really big strong secondary branches. This one is going to be colas galore. Maturation: 3rd - well into flower - all white pistils Plant 3: Height: 6th (95cm) For some brief days the tallest plant in the room, she peaked early and is now the "shortest" at "only" 95cm for this "50-70cm" strain. She is utterly dwarfed by four of her five sisters in just about every department, being quite a bit smaller even than plant 4 (although I have removed the most lower nodes from this plant). Compared with her sisters she is almost a runt... except that she is 25cm taller than the strain top-end average and matches the maximal height of the previous tallest Epsilon F1 plant I am aware of. It's not that she is small, actually she's pretty big for an Epsilon F1, it's just that the rest of the girls are on another level altogether. Plants 1, 5 and 6 are all absolute beasts. Maturation: 1st - well into flower - first shades of brown in some pistils. Plant 4: Height: 5th (98cm) although only 3cm taller than plant 3, overall she is a much larger plant. Her secondary nodes are the same height as plant 3. Maturation: 2nd - well into flower - all white pistils Plant 5: Height: 3rd (113cm) - one of the two thick/short girls who have grown at a similar pace all along - she is further ahead than plant 6 but not by much and I think she will probably exceed 120cm this week, though I do not think she will outgrow plant 1 or 6. Maturation: 5th - early into flower - bud sites developing. Plant 6: Height: 2nd (120cm) - my predictions were correct about this girl and her continued growth. I now think she might actually outgrow plant 1, which is quite worrying. Maturation: 6th - early into flower - bud sites forming - by far the least mature plant of the six. ### Week 6 Day 2 23:00 30/7 Photographed. Raised the light. Rotated the plants. Inspected, measured and reported on each plant. ### Week 6 Day 3 23:00 31/7 It has not escaped my attention that the plants that are more advanced into flower have darkened and have some burnt tips. I need to flush them and lay off the base nutes a bit. These plants are just growing and maturing so quickly that I cannot keep up. ### Week 6 Day 5 02:30 2/8 Fertigated 3l of nutrient mix, without either COCO A or B. ### Week 6 Day 6 01:30 3/8 photographed --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========
Processing
Likes
7
Share
Likes
12
Share
Week 2 she's getting bigger and stacking them nodes, having to water more frequent. Also she almost ready for a transplant.
Likes
Comments
Share
A hint of pre flowering showing it's a girl. It's time to plant her outdoor.
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
13
Share
@Cgrow
Follow
This week I will maintain the same techniques from previous week. Noticed that main leafs got bigger during the weekend, both plant look healthy and happy and are now looking wider. Also to note that I have been rotating the vases so they catch light in different positions/sides. It does not replace the real sun movement however it will stimulate the growth in different parts of the plant. Hopefull by the end of this week we will have a new set of baby leafs.
Processing
Likes
12
Share
Likes
16
Share
Today on day 17 from date of birth Iam preparing a worm casting tea. In a cheese cloth bag ,Made up of 2 cups of worm castings 2 tablespoons of unsulfured molasses,2 tablespoons of mineralized phosphate (bat shit) ,2 tablespoons of soluble seaweed extract . 2 tablespoons of alfalfa meal 2 tablespoons of all purpose 4-4-4 all Gia green products other than. I also sprinkled in some great white premium mycorrhizae inton2 gallons of water. Tea will brew for 24 hours before applying.
Likes
28
Share
Sorry for the late post had a very busy period. The buds are great, good feedback from patients. First time I've been able to taste a fully organic bud and I can say I won't be going back!
Processing
Likes
10
Share
@Andres
Follow
I was traveling ... to give information ... the temperature has dropped ... I think she will be even slower outdoor ...
Likes
20
Share
@Xabii
Follow
Ran into some Calcium/Phosphorus trouble !? First deficiency in the grow. Topped up with new nutrient solution, added some CalMag and Universol Yellow 12/32/12. Raised PH to 6.1 and EC to 1850. Added 100ml 12% H2O2 to make sure no PH trouble occurs. Switched the Carbon filter around so that I can lift my light a little more. Orion F1 is getting really frosty ~2 more weeks? The Northern Lights take some more time.
Likes
7
Share
Vamos familia actualizamos la cosecha de las gelato Olandese de Dutchfem . La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a DutchFem, Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.
Likes
32
Share
@Ciocanna
Follow
From the 9th day I started adding Hesi Root Complex 1ml and 2ml PowerZyme per 1L of water. We poured out water only as needed and did not water the stem! Day 13. I increased Hesi Root Complex to 5ml/1L Hesi PowerZyme 2ml/1L We poured out water only as needed and did not water the stem!
Likes
47
Share
wonderful Journey with this Strain. All Seeds germinated. All Plants growing vigor and very smooth. Only topped them twice. Plants get big and showed great Structure. The Budsites were big and buds itself knotlike and dense. Smelly and sticky.very courious how they taste Welldone hybrid Strain
Likes
Comments
Share
Likes
8
Share
First week under the Lumatek 600 Pro set to 50% and aporox 40cm away from canopy. Day 7 applied some pruning and supercropped the few taller girls to even out the canopy. I will add a CO2 bag next week as i increase the power to avoid potential light stress.
Likes
16
Share
@Mo_Powers
Follow
the 9th week. she's slowly starting to smell. when i open the door to the greenhouse, i get a sweet smell. but it's a really faint odour. the pistils are still white. i think she'll be ready for harvest in 2 to 3 weeks. she still has a few weeks to form proper buds. she still looks very healthy. i hope the next few weeks will be really sunny again. unfortunately it's very changeable weather at the moment.