Likes
Comments
Share
Von links nach rechts: Sleepy Joe, Lava Cake, Runtz. 02. Mai 2025 Die Wurzeln sind jetzt sehr gut entwickelt. Seit dem Einschalten des Lüfters haben die drei gut 20l Wasser verbraucht. 😅 Sie wachsen so unglaublich schnell, dass sie in drei Tagen fast die LED berührt haben. Dadurch leichte Verbrennungen an den Spitzen der Lava Cake. Viel höher darf die Runtz nicht werden, sonst muss ich die Spitze nach unten binden. Das Zelt ist nur 180 cm hoch. Der Lüfter des Filters läuft jetzt schneller mit 50% Leistung. Die Luftfeuchtigkeit lag heute bei 75% und musste aus dem Zelt. Das führt aber auch dazu, dass die Wärme abgesaugt wird. Wird Zeit, dass es draußen konstant wärmer wird. 03. Mai 2025 Die Lüftung habe ich über den Trenntrafo wieder eine Stufe langsamer gestellt. Aber auch vorher lag die Temperatur nachts bei 22°C, also alles im grünen Bereich. Licht: Eine der zwei Sanlight S4W strahlt exklusiv seitlich auf die Runtz. Normalerweise würde ich das nicht so machen, aber die Runtz wächst sehr luftig und hat sehr großen Abstand zwischen den Blättern. Sie sieht gesund aus und wächst gleichmäßig. Die Rückseite der Pflanze zeigt keinen Lichtmangel durch unsymetrisches Wachstum. Eine Beleuchtung von oben wäre aktuell schlechter. Ich muss schon sagen, die Runtz überrascht mich immer wieder und ich mag das zwar hohe aber sehr luftige Wachstum! Die Sleepy Joe und die Lava Cake sind vergleichbar hoch und teilen sich die zweite Sanlight S4W. Auch ihnen geht es gut, etwas größer wachsende Pflanzen sind mir aber lieber. Wasserbrauch: Bisher 30l. Heute den kleinen Tank mit 20l Wasser inkl. 64 ml Canna Aqua Flores aufgefüllt. 34 ml pro 10l bei hartem Wasser gemäß Rechner von Canna. Beim letzten Grow habe ich noch pH-down verwendet, das ist laut Canna nicht nötig und funktioniert aktuell perfekt! Canna: "Es sind pH-Stabilisatoren enthalten die ein Einstellen des pH-Werts unnötig machen." Quelle: https://www.canna-de.com/canna-aqua-flores Die Pflanzen wachsen wie beim letzten Grow kräftig und gesund, ohne Anzeichen von Mangelerscheinungen. Und sie sind nicht übertrieben dunkelgrün durch zu viel Stickstoff. 😱
Likes
49
Share
Likes
9
Share
things are getting out of control. finally seeing signs of flowering. water every 3 days or say about 2 gal. each will top dress with some more 2-8-4 in a couple weeks
Likes
4
Share
@RCUgrows
Follow
Plan is doing very well. Paul needed about four or five times this week with about 12 to 15 flowers. Hand pollination occurred. Hopefully everything took
Likes
17
Share
@RelaeX
Follow
Week 22: Flower Week 5 – Canopy Development, Irrigation & Trichome Details 🌸❄️💧 A detailed look into flower structure, nutrient management, and overall setup dynamics during the peak flowering phase: Environmental & Climate Management (Summer Heat & RH) 🌡️💧 Summer Heat Compensation: Due to high ambient temperatures exceeding 30 °C, an air conditioner is running alongside the dehumidifier during the day to keep lung-room temperatures stable. Relative Humidity Peaks (Lights-Out): Data logs show RH spikes reaching 70–71% inside the closed tent during the lights-out phase. Preventive Countermeasures: The dehumidifier is positioned to blow dry air directly toward the tent's passive intake port. Two internal circulation fans are running on high alongside the main exhaust system to maintain strong air velocity and prevent localized moisture pockets around dense bud clusters. Nutrient Schedule & Irrigation Log 💧 Feeding Regimen: Hesi Schedule starting from Flower Week 4 (including Hesi Bloom Complex, Phosphorus Plus, SuperVit / Boost). Supplements: BioBizz CalMag added 2–3 times per week (calculated on a 10-liter batch mix basis). Irrigation Volume: The automated irrigation system consumed roughly 100 liters of water this week. The primary 50-liter reservoir was refilled twice throughout the week. Bud Structure & Trichome Coverage 🔍❄️ Heavy Resin Production: High-resolution close-ups reveal dense calyxes completely encrusted in trichomes. Notable Feature: High-density trichome coverage extends past the sugar leaves and covers the upper fan leaves. Glandular heads are transitioning from clear to milky white. Pistil Maturation: Pistils are steadily shifting to a deep amber-orange hue while new white pistils continue to push out. Anthocyanin Expression: Under high PPFD levels, subtle purple and dark pigmentation is beginning to show along the calyx edges and sugar leaves. Foliage Condition: Upper fan leaves directly within the central light cone show mild Cal-Mag/light fading—a standard response to high metabolic rates under peak LED intensity. Setup & Tent Architecture ⛺💡 Lighting: Quad LED array aligned to provide uniform edge-to-edge canopy coverage without shaded zones. Environment Sensor: Wireless environmental sensor mounted right at canopy level for real-time temperature and RH tracking at the top colas. Airflow & Lower Canopy: Dual clip-on fans maintain upper and mid-canopy airflow, while a clear lower stem area ensures unobstructed intake circulation beneath the ScrOG frame. Extra Section: Maintenance, Tech & Support Log ✂️🛠️📡 Routine plant maintenance and control system troubleshooting were key priorities alongside tracking bloom progress. Canopy Pruning & Defoliation ✂️🌿 Lower Canopy Clean-Up: Performed a selective lower trim, removing a few weak bottom shoots and shaded foliage. Energy Focus & Circulation: Clearing lower growth redirects plant energy toward the primary colas while maximizing passive floor-level airflow. Spider Farmer AC10 Controller – Connectivity Issue 🔌⚠️ * Device: Spider Farmer GGS AC-10 Smart Controller / Power Strip. Issue: Experiencing recurring Wi-Fi signal drops and app sync failures. Status: Standard network troubleshooting (forcing a 2.4 GHz band, module resets, etc.) has been completed without resolving the issue. Support Ticket: Reached out directly to Spider Farmer Support yesterday evening regarding the ongoing network instability. Week 23 Outlook: Will follow up next week with an update on customer support responsiveness and resolution efficiency. Extra Section: Mother Plants & Nursery Rack Overview 🌿🌴🍋 The propagation and vegetation area is running at full speed alongside the main bloom tent, housing strong mother stock and a variety of companion plants. Mother Plant Care & Architecture ?✂️ Stem Structure & Health: Healthy, well-trained mother plants displaying thick, woody main trunks (lignification) and strong branching. Selective Thinning: The mother plant positioned in front of the propagation rack received a light pruning to clear out inner shade leaves, boost airflow, and concentrate vigor on primary clone sites. Canopy State: Dense overall leaf structure featuring plenty of vigorous growth points ready for ongoing clone extraction. Propagation Rack & Exotic Plant Log 🛠️🌱 Top Level (Organic Lemons & Garden Transition): Home-grown organic lemon plants (Citrus) are thriving under propagation LEDs, monitored with yellow sticky traps for preventive pest control. The older, larger lemon trees have already been transitioned outdoors into the garden for direct sunlight. Middle Level & Bench (Washington Palms): Larger Washingtonia palms are placed on the adjacent workspace table in ambient room light, while smaller palm seedlings continue root development inside the propagation tent. Bottom Level (Lemon Eucalyptus): One established and two newly propagated Lemon Eucalyptus plants (Eucalyptus citriodora) are developing smoothly.
Likes
8
Share
@dauntless
Follow
Everything is the same, since moving everything to one tent, the NL auto started flowering a bit more. The Vanilla Frosting started stretching, and the White Widow is finally pre-flowering a little. The VF gets dry every day, and weather has been wild again but I have managed to keep everything healthy. The addition of OG Biowar has really seemed to put the critters out of work (https://ogbiowar.com/). Granted I have also used Boogie Brew Black, and it takes me friggin 20-30 mins to get everything mixed and ready, but the plants are not complaining. I make a compost tea in a five gallon bucket and bubble for about 24 hours with a serious air pump and huge air stones, then I add all my nutes to it. I would say this is a 95% organic grow. Check out the video and check out the meds I made from the leaves of these plants. Packed a mason jar with clean leaves and poured in regular isopropyl alcohol - a few days later and its so green you cant see through it. I learned about this from a friend from South of the border. It seems to work well on muscle aches. -shrug- at least for me. FIVE MORE WEEKS For those who wonder how much light/heat I am putting down, its like 1807.8 umol/s at dead center over the Cree light, the Spider Farmer puts down way less, but the two lights together are working well and fuck it, its 82 degrees in the tent during the day and they are all pretty happy. So it is what it is. If it gets super hot I keep the CREE part of the Phlizon on, and turn of the LEDs, the SF1000 has plenty of light to help.
Likes
150
Share
@visco
Follow
Hoping to harvest at around week 12 or 13. Around the end of september, we still got a long ways to go though XD
Processing
Likes
260
Share
D50. The start of the fourth week of flower, and she is just doing her thing without much attention from me. She drank close to one-quarter of the reservoir in one day, so I expect to fill it again later this week. ------------------------------ D52. I've started removing some LST wires and removed a couple of leaves to increase air circulation. That's about it. ------------------------------ D54. I’m at Spannabis in Barcelona, so there is no plant news today. Completely mad here, though. There are loads of seed banks, many other vendors, and tons of people. Officially there’s no smoking allowed, but… there’s smoking EVERYWHERE, lol Heading back to the madness tomorrow. ------------------------------ D56. I literally came back home from Spannabis only a few minutes ago. The plant looks good and there's nothing to report. ------------------------------
Likes
29
Share
Overall i'm really happy with this strain. First i thought i wouldn't get a high yield but i'm pretty happy with it i got 250grams of top trimmed buds 2g of hashoil 2g of bubblehash and another 80grams of dry plant material for making bubblehash. Super potent strain with an amazing flavour, definitely nit the last time growing this strain.
Likes
20
Share
@Mtmtc
Follow
Buds are drying in a 55% relative humidity! They are already trimmed & in about a few days they will be cured in the grove bags! Happy with the end result for this run!
Likes
8
Share
@WeedBerry
Follow
Sorry guys been very busy lately thats why i havent been keeping up to date with my diary
Likes
5
Share
Likes
7
Share
Managed to get over 4 ounce per plant the smell is very strong and is covered in crystal, I’ve already harvested clones in the mean time and also got over 4 ounce per plant
Likes
7
Share
This lady is killing it so far! Another beautiful pheno of Mimosa EVO by Barney's Farm, It's a pleasure to work with their genetic, this plant looks absolutely gorgeous, I hope that she performs well under the Spanish sun this season, we can have very high temperatures but I think this lady is gonna handle the summer without any issues, let's see how this lady keeps developing guys!!
Likes
6
Share
@Saihtan
Follow
On my next round I am going to make sure that I make additional soil when I start a grow so I can keep topping the soil off to take advantage of all the root barbs popi g out
Likes
9
Share
Day 63. Buds are coming along, bit slower than my Harlequin but still, progress. She has stretched like crazy, gonna have to supercrop couple tops. Sooo looking forward to try this strain. Both my plants are somewhere around week 3 flower