Likes
Comments
Share
Hi everyone, the plants are stretching well. The fastberries are starting to take on shades of purple. The grapefruit is already producing trichomes, as is Rhino Ryder. In any case, for the moment, everything is going well. Thanks to those who follow me and read my comments.
Likes
13
Share
2022-10-30 The Seed was gifted to me by my Growmie @Oimrausch thy Buddy! She was growing from beginning very well Turned out to a strong well structured Plant Buds are dense and Thick, she smells super This Run was one of my Best, I feel iam reaching good Levels in the Growingconditions VPD, Wind, and Fertiliser helped the Genetics to show what they got!---- Especially to mention are the Hyphotonflux HPF-4000. All Plants responded very well to the Lightspectrum
Likes
4
Share
Likes
26
Share
@FUH20
Follow
2021 - 08 - 29 Wedding Glue Auto 1 - most fan leaf are starting to turn yellow , Hoping she finished up in a week to 2. - Day 55 since sprout - trichomes are mostly milky, not much amber on buds yet. Wedding Glue Auto 2 - Some of the buds and fan leaf with abit of sugar leaf are turning purple... - Day 50 since sprout - She's fattening up nicely image format : Wedding Glue Auto 1-4.1 day 27 Wedding Glue Auto 1( plant strain and tag number) , 4 (week), 1 (image number) , day 27 ( Date since sprout )
Likes
4
Share
Likes
7
Share
Week 13 Sour Jelousy Last day after lights on i cut them and they are going in Vivosun Vcure 14-16 days cycle around 55-62F with 58-65RH will add pictures when i cut her , plants smell really nice speacily taller one and the density is decent not rock solid but decent dence , Bear Knuckle is allso done and she smells and tasty like some gassy green apple .
Likes
8
Share
Die Ladys geben Vollgas! eine Pflanze wurde testweise getoppt, die anderen relativ in ruhe gelassen. Es wurden nur jeh Pflanze 1 Blattpaar entfernt damit die unteren triebe mehr licht abbekommen, es wurde der Bloom Dünger von greenhouse gegeben. Die Vorblüte ist auch schon voll im Gange Da man im Netz keine Angaben Zur Verwendung von Greenhouse Feeding für Autos Findet, habe ich bei den Jungs direkt angefragt und auch innerhalb 30 Minuten eine Antwort bekommen. Top!
Likes
9
Share
Bueno, pues ya se nota que empiezan a engordar y tirar resina, poco a poco huele más jajajaja. Me muero de ganas ya de que llegue el dia del sacrificio ✂️✂️😂🔥. A ver... Se que es hibrida, pero de predominancia indica alrededor de un 60%.... ¿Ésta estructura es sativa como ella sola verdad?????? Tallos alargados, internudos separados, las hojas finitas.... Y con el led a la misma altura que sus hermanas, las cuales son mas frondosas, se sienten mas hibridas tirando para indicas, pero ¿Ésta? No se, ha salido así jajajajaja igualmente me gusta muchisimo la estructura, es preciosa, aunque lo de que en teoria sea la mas rapida de las 4 no me va a cuadrar mucho jajajajaja ya veremos cuando lleguen los cortes.
Likes
11
Share
@CocoLogic
Follow
August 30th: (F13) Fertigation once a day with same recipe (1150 EC 6.1 PH) watered until 10-20% run-off August 31th: (F14) Fertigation once a day with same recipe (1150 EC 6.1 PH) watered until 10-20% run-off Sept 1st: (F15) Fertigation once a day with new recipe (Mid-Bloom)(1200 EC 6.2 PH) watered until 10-20% run-off Screwed each QB Board to the roof of each tent to gain some height space Supercropped two branches on the TUT Sept 2nd: (F16) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Sept 3rd: (F17) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Sept 4th: (F18) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Sept 5th: (F19) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Defoliation on both plants Note: Im happy the TUT stretch is finally over, we are on the extreme limit on the light distance from plant in the TUT tent, I don't see any stress sign so far, will have an eye on this for sure in the next week! :)
Likes
6
Share
Processing
Likes
25
Share
Well they are all set and into the forever homes all put into promix soil with added root stimulant ..They are all happy and healthy going to be adding a netting and doing it that way .. These are all maxing breeders with great genetics .. The beast is going to be the @sweetseeds #sanfernandolemonhush she is leaning hard on the sativa side with long branching allready mm can't wait to see how they do in two weeks time ..
Likes
2
Share
@EyeMKing
Follow
Started the first top dressing of Gaia Green All Purpose and Power Bloom at a 50/50 ratio of 1tbsp/gal each.
Likes
14
Share
D85/F41 - 24/06/23 - She's almost ready, I think I'll start the flush soon D86/F42 - 25/06/23 - Temp is still too high, I'm trying to refresh the environment with air conditioning D87/F43 - 26/06/23 - First Thricomes Video. I'm going to start the flush today and I'll arwest next WE D88/F44 - 27/06/23 - Flushing D89/F45 - 28/06/23 - Flushing D90/F46 - 29/06/23 - Flushing D91/F47 - 30/06/23 - She's ready. Tomorrow I'll cut her
Likes
4
Share
@Demaro
Follow
The ph in the soil is very low, causing the plant not to grow at all, very sad.<font style="vertical-align: inherit;"><font style="vertical-align: inherit;">😅</font></font>
Likes
3
Share
@CalGonJim
Follow
3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs
Likes
34
Share
day 50. 9.04.18. shes like dang! got a little hair cut and defoliation the boys got to do their clean up which everyone loves. i cant wait to see what this plant will finish as shes stacking heavy and smells wonderful. shes gunna be super heavy and dense her under carriage structure is beautiful.
Likes
49
Share
3 Pheno’s 🍪🥜🍬⛽️ from clone 🌱#dosido
Likes
96
Share
💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are bad to do it all over again 😁 So what do you say we have some fun 👈 We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds Well we are just 21 days in and I have pulled her over and started some LST 👌 It's been another great week so I'm happy with what I got going on so far 👈 The stretch is on 👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a UR45 to the mix👈 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
44
Share
lots of work went into moving these girls outside. They are in a nice sunny and protected spot now. Can't wait to see these girls grow up. Gave them the best start I could. Season is a bit late here this year too.