Likes
Comments
Share
@BlaKX
Follow
Ajoooooo das ist bzw war mal ne lange check Liste..Gefällt mir definitiv:) Die WW muss noch trocken habe sie Komplett Manikürt da vielen 30g Zucker Blätter nass ab und zu Butter verarbeitet Schätze werden so 75g trocken.
Likes
11
Share
@Dreadnug
Follow
Plant has been getting straight pH balanced water this last week and minimal nutes. It is showing some slight nute burn so I let off a bit and raised the light canopy about 6”. I discovered that what I thought was a calcium or potassium deficiency was actually a rookie grower error by me. I have an RO system that I use to water all my strains in the grow room including this one, but when adding nutes to the water, it takes too long so I had been filling them up with well water. When I had originally tested the well water, I must had used a faulty testing agent as after testing it this last week, I was showing a pH of 7.5 vs. my RO of 6.2. Thus, every time I was adding nutes (multiple times a week) I was significantly fluctuating the pH between regular feedings and nutrient additions. To make matters worse, when I originally thought it was nute burn, I flushed each plant with well water and likely caused additional stress. Anyway, I have since learned that the well water needs to be treated, I only utilize RO water the last few days and plan to do so over this next week. Also, I have turned off the CO2 system as I was starting to see signs of heat stress on a couple of the strains (not this one). The literature I have reviewed suggested that these strains might be able to handle heat closer to 90F but it was also causing issues with high humidity so when I added a dehumidifier, it pushed the day temp to between 90-92F and the overnight temps were not getting low enough (maybe 85F or so). Maybe I could leave out the dehumidifier, but I was getting rH of 70% and didn’t want to risk any bud rot or mildew growth. So for now, I have turned off the CO2 and am getting high temps of 81F with 60% humidity and overnight temps of 74F and 50% humidity. The Future #1 has shown the least signs of stress and is fattening up its buds very nicely. Over the next few weeks I will start monitoring the trichomes for a nice milky color for harvesting.
Processing
Likes
3
Share
plant is healthy about to feed her her meal... Bud development is right on point.
Likes
4
Share
@JennK82
Follow
I had bugs but gone now since plants are out of room and a cleaning was done
Likes
10
Share
Day 66 : Her buds are full of crystals and are so dense. The smell is really strong stinky skunk like GZ , but GZ smell is more acidic. Her crystals are milky and soon will start to amber. Breeder refers that will be pretty mature in 70 days. Not in my case :D we will see in 4 days, in next watering. For now no ambers. I prefer to cut when we have 15%-20% amber and 80%-85% milky, because after the smoke is very heavy for my taste. Edit Day 70 : She watered with juices and i continue until i see first signs of amber trichomes. Still no ambers. She has gained so much weight , side branches cant lift their self. I think she will be the heavier. You can understand her weight if u lift it.
Likes
42
Share
@Hashy
Follow
Notes. Week 18 (week 11 flower) Light settings 12/12 on at 9.00am off at 9.00pm Viparspectra Light power= 75% 165w VPD aim 1.0-1.2 DLI aim 35 Extractor settings temperature 23c with 0c steps Humidity 30% with 0% steps Max speed 10 Min speed 4 Monday 17/7/23 Day 120 (day 74 flower) Looking good. Tuesday 18/7/23 Day 121 (day 75 flower) Defoliate Wednesday 19/7/23 Day 122 (day 76 flower) Harvest #3 338g Hung to dry. Extractor settings temperature 20c with 0c steps Humidity 50% with 0% steps Max speed 10 Min speed 2 Thursday 20/7/23 Day 123 (day 1 dry) Removed some fan leaves. Friday 28/7/23 Day 132 (day 9 dry) Trim #3 FBPHP14, dry 38g. Larf 4g. Saturday 29/7/23 Day 133 (day 1 cure) Saturday 5/8/23 Day 140 (day 8 cure) Put humidity packs in the jars. Friday 11/8/23 Day 146 (day 14 cure) Stop using auto burping system now and burp less frequently for a bit. Saturday 12/8/23 Day 147 (day 15 cure) Sunday 27/8/23 Day 162 (day 30 cure) Sampled Stats for the grow #1 377g #3 338g #4 276g #5 393g #6 312g Total wet weight =1696g #1 FBPHP12, dry 40g. Larf 4g. #3 FBPHP14, dry 38g. Larf 4g. #4 runtz, dry 29g. Larf 2g. Rot 5g. #5 Pink Rozay, dry 38g. Larf 6g. #6 Candy Rain, dry 34g. Larf 0g. Total dry weight. 179g Total dry larf weight 16g Loads of trim so going run some hash.
Likes
2
Share
So I am halfway through my first harvest and I'm starting to feel like I may have been impatient! Would appreciate any advice or constructive criticism from any experienced growers out there! Do you think I harvest the rest of my plant now or leave it a while? Any tips/hints on the best way to maximize bud density? Thanks in advance
Processing
Likes
27
Share
The plants have reached a stage where they have enough foliage and growth on them to begin training and defoliation. I cut most of the side growth and major fan leaves off. Using safety pins and twine, I started their LST.
Likes
6
Share
@Ninjabuds
Follow
The permanent marker plants we'll they both took a little stress after reporting but they have bounced back. They both are back to having leaves praying. They are a little finicky still the one with the father leaves is not so bad but the thin leaves plant. At 1st it looked as I'f it wanted nutes from being so light green then when ingot nutes with the rest the plants it got a little crisp on the edges. It's still going strong no need to worry This past week all the plants did great dealing with getting repotted and topped in the same week. I definitely took a Rick doing that seeing i only left each plant with 4 leaves. This past week was also a struggle to keep the vpd in a decent range. The Temps outside have been below 32 for a few days with Temps dipping down to almost 0 at night. With the space heater running it's pulling the humidity down. I think I have figured out the solution to that problem so I won't run into that next time it gets cold again. All the plants have really started to grow their new branches sense being topped. A few of the plants are a little smaller than I'd like but I'm gonna keep em alive for now.
Likes
3
Share
@DoctorP
Follow
looking well but i think she could have a little more resin production at this stage, currently going in to week 6. any tips would be helpful, im already pumping co2 in there above the plant so it falls down, under a 200w attis lumatek led. (will upgrade next grow) ... the old co2 pack behind the plant is empty and old just not removed 🤣 thanks :)
Likes
24
Share
@EBxAH
Follow
Hey there everyone! Today the reapers are 33 days old!!! I love cultivating peppers! Everything is going GREAT so far!!! Today was their first day outside and they are LOVING it! Again, it's peppers so this will be a long journey, lol. I'm thinking about doing some clones though. Well, that's about it for now. Thanks for stopping by and Happy Growing Everyone ✌️❤️😁🍀🎶👽 EB
Likes
68
Share
WEEK 6 - Day 46 - 05/16/20 Rickety Cricket is finally starting to get that scarred/cut up/garbage look just like the IASIP Character it's named after 😂 Seems like the pre-flower stretch has started so it has another week or so to really set it's veg base. Keeping up with the LST and clipping any little leaves that are bunching/blocking since it's a small little cluster-eff of growth. This "concept garbage homeless Rickety Cricket" grow in a coffee can is going perfectly for all the wrong reasons 😂 Great little project as I finish off my 3 Sour Diesels (Mac, Charlie, and Frank 💪 <-- it's a bicep, not a dick.) Giving Cricket the leftovers of big feeds for my main plant, chased with water (Should be lucky i'm not giving it lemons..) Should turn into a hilarious chunky small fat bud situation once the flowers start coming in. Will update soon! -- Stay Safe! 😷 Thanks for checking in, throw down a like and/or follow so I can return the favour! 🙌 -- IG: @GlazedGrow
Likes
19
Share
27-08-2026 Somehow it’s hard for me to keep updating the progress of my cannabisplants. I wanted to do it weekly, but it just doesn’t happen. Our fruits and vegetables need to be harvested and our animals want a lot of attention too! I’m so happy growing with Biotabs, I hardly have to do anything and if I don’t have time, my plants are growing anyway. GMO Fast isn’t flowering yet. She is only showing a few pre-flower hairs and only when I search for them with a magnifying glass. I think she won’t make it in time… GMO Fast also had some issues during a summer storm with heavy winds and rain. One of her main branches came down. It was still attached to the centre of the plant, but it began to rot and I had to cut it out. I lost 25% of this plant. It’s my own fault. She is over 2,5 metres now and her height makes her susceptible for wind. It makes me think about securing all my cannabisplants with long bamboo-poles or sticks. If the flowers start growing, all those branches will get heavy eventually. Maybe it’s time to prioritize the cannabisplants at this moment… In week 16 (first signs of pre-flowering) all the plants got watered with 5 litres of water with 20 ml of Bio PK 5-8 and this week, week 20, again 20 ml of Bio PK 5-8 diluted in 5 litres of water. This is the third time I had to water the plants manually. I just love this way of growing. Perfect for someone with a chronic illness. The plants have a nice green colour. I still need to ‘shave the legs’ and cut some branches and leaves away at the inside of the plant. Especially now when it rains sometimes I want them to dry quickly. I already removed two baskets of leaves and small branches from NL x Big Bud and Burger Kush.
Likes
4
Share
@QixxGrows
Follow
Day36, 37, 38: Seems to be growing a set of leaves per day now. Super growth! Stretching to the top. Day39: I had a hiccup with the camera. For some reason it stopped responding at 04:30 in the morning. I only realized it much later. I still don't really know why, but reseating the data ribbon fixed the issue. Day40: After fixing the camera, I decided to take this view again. The Lady is starting to show some nice growth and this view will show it best. If you look carefully, you'll see that her branches are not green, but rather reddish. Definitely related to genetics :) Everything else is within limits. Plus, the leaves look super healthy. Day41: Here you can see the stem colour better.
Likes
4
Share
Not much issues with these plants except for Plant #1 which had a pH problem early on for some odd reason.
Likes
36
Share
Olá companheiros, mais uma semana tudo está a ir bem com as princesas, estão com bom desenvolvimento na floração, as flores estão a engordar e cheias de tricomas. Grato amigos ✌️☮️🌱
Likes
5
Share
@coolesrat
Follow
Still swelling but starting to slow down and swagger. It's kolas are becoming so large that it's really starting to weight down the plants small height and stature. Trying to get away with not holding it up but I will see how the further biggest kola starts to lower more how it'll end. I'm starting to lower the feed and get ready for the last 3-4 weeks I'll be giving these plants. Some more foliage will be removed eventually in the coming weeks and also I'll start to change the feed up a little. You can really see the difference in the two phenos. One's a lot like a leafy gelato and the other is OG all the way with great dense kolas. I'm expecting the Gelato type pheno to take 9-10 weeks and the OG one seems to be showing it's age more rapidly with it's pistil development and colour change beginning to start while the other seems untouched and continues to shoot newer whiter pistils!
Likes
5
Share
@hilfa
Follow
- CBDiesel roots big improvement this week but still very insignificant root mass compared to others - Lemon Ice growing tall quickly - Many nice looking bud sites starting to pop on Lemon Ice and especially the Sour Tangies - Fed foliar spray once - Added CO2 this week - Continued to tuck stretching tops back under trellis net
Likes
7
Share
@russrahl
Follow
Decided to try this freebie seed I got from an order. Breeder is Prism Seeds, from Canada I believe. I will be growing this single Feminized Alien Technology plant alongside 3 other Ayahuasca Purple from Barney’s Farm to fill my RDWC setup/tent. Hopefully they jives well together in the same RDWC system when they go to the flowering tent. For now they are in there 3x4 veg tent in 3gal single DWC buckets. I have a 1200w(180w actual) king plus LED about 2.5 feet above them. The humidity was very low so I added a humidifier to the tent and was able to get it up to 50%. But with the seedling being directly over a bubbling bucket of water as long as I keep the rock wool moist she will be fine. Seed went into a glass of water overnight and directly into rock wool cubes and placed back in the dry cup and covered the top for about 24hrs until she came up to the surface. Then I dropped her into a DWC bucket/clay pebbles and put her under a 18/6 light schedule to come up. The next day we could see stem but she was still in her seed breaking free. Second day she was up but I had to remove the seed and skin very carefully to help her out as she was stuck a bit. Couple hours later she was up and out! Just gonna keep the rock wool moist and water the clay pebbles around it for the roots to explore. That’s it for this week, cheers! 💨