nothing to say, she is doing good. 2 weeks to go

both of this clones has the same mother and grow together with same nuts water ect The only difference is pot size ( first in 4L smartpot second in a 6) And buds are different don’t know why

Here we go a little loom at my Mars hydro tent

great week. flowers are filling in. trying to figure out what the yellow is from. PH is good, its well fed. BG 2 started but stopped. the smell is incredible. Only a few weeks left!

Slurricane #4 Yield: 34.5g Smell: 8.5/10 - gassy, deep piney, fuel, earthy, Bag appeal: 8.510 - slightly leafy/stemy Crystal coverage: 7.510 - impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent High: 6/10 - indica dom Comment: looks amazing, smells amazing, tastes nice, burns like shit. 46.5/70 = 66% 👎🗑️

*ADVISE NEEDED* The day before yesterday I discovered a huge error in my system. I placed filter material in the feed-throughs of the breeding boxes. This is to prevent the roots from growing together over time. However, what I caused with that is very difficult to explain. The bottom line is that the distribution of food and circulation was actually not good at all. This also explained the differences in the water temperature, but also PH and EC values. That is now completely under control because it now runs stably for 2 days. However, you can see that the records have had a bad start. I am thinking about starting over. Week 3. Week 2 was looking for the correct settings for my system. I found out that the temperature in the bins is quite different. When I set the water chiller to 19 degrees, it all flows fine into the first container. There it rises about 0.5 degrees per bin. The margin of the chiller is about 1 degrees, causing too many fluctuations in the system, with tray 1 becoming too cold and the last one too cold. I solved this by shielding the box at the inlet of the tent with heat-protective foil. I also put a fan on the water chiller. If that catches on, the entire loft heats up, whith more fluctiations. However, I have enough space to measure very precisely and I am getting more and more control. I think the brown leaves were the cause of much too hot water. Since I have the water temperature under control, I see that the new leaves are growing nicely. Moreover, since yesterday (13-5) I received the nutrition. 10 days late. I just finish the root scheme I think. That is still 3 days a 70 mm per day combined with BioBizz Heaven. I tried to take some pictures of the roots and some close ups. I hold the lid with my left hand and with my right hand I try to take a picture zoomed in (max). While the wind makes the roots dance past my lens😵 Something different than usual ... Hope you like it. If you see something that needs to be addressed, let us know. It is my first breeding so there will undoubtedly go wrong. This week I also connected the water reservoir with which I can flush the entire system at once. With this I also control the Ph in the system. Will post photos soon.

Empezamos con su 5 semana y su 2 de floracion con mucha fuerza y se ven muy buenos resultados 💪 Hemos aplicado la malla para someter a la planta al meyodo scrog y asi abarcar la luz a todas las flores 💐

This marks the start of week 4 for these wonderful lady's . I'm going to be slowing up on the nutrients and the watering noticing some stuff I don't like seeing . For the growth difference in 1 week all I can say is WOW I'm getting very excited to see what the future holds for these young lady's !!! I'd like to thank every one for their continued support! I've learned so much in such a short amount of time because the community is KICK ASS . I'm going to be repotting these fine young lady's into their final homes at the end of this week! Stay tuned ladies and gentlemen alike and remember to check my diaries daily for updates ! Anyone checking out the pictures it isn't mites or any of that I been having a battle to get them to my standard of clean since the transplant. Slow and gentle is the way so no damages are done ! :) -Happy Growing!

She looks fantastic,she's in a 7l pot and she has the same soil as her sister gorilla girl and cream mandarine and darkr devils all planted the same day and she's the biggest one on a 7 l pot. This is pretty strange,anyways, she looks super happy, full 100% organic grown well see howbshe ends up performing

Buone notizie: iniziano a fiorire, quella più indietro sta raggiungendo le dimensioni delle altre Cattive notizie: mostrano segni di troppa acqua e non si stanno alzando molto, ho paura che vada ad influenzare il risultato se non risolvo il problema dell'acqua

My plant smells really strong :D

Hola que tal? yo me he levantado en domingo a las 08:30 me he tomado un café y me pegado un bongazo de aúpa jaja después, musica y hacerles una sesión de fotos a las plantitas 😇👌🏽 Pues hoy es el último día de la 7ª semana de floración, veo a 3-4 plantas listas para cosecha. Esta semana en los directos de twitch usaremos la lupa para ver el punto de maduracion de los tricomas. Deciros que estoy muy sorprendido con las Harlequin CBD ya que están sacando unas porras muy interesantes con aromas súper inciensados, son plantas mega compactas ideales para espacios pequeños y súper productivas!! vaya tela! Una de ellas está súper oscura y tiene mitad planta color verde mitad morada/negra de locos. Sobre las mimosa pues más de lo mismo, más resina, más cogollos, más aroma y plantas muy fáciles de llevar sinceramente... Los colores morados rojizos y naranjas que están sacando me encantan Que deciros de la Mimosa GB que mutó y desarrolló Fasciacion en una de sus ramas satélite. Da cierto miedo ver el cogollo parece que me vaya a engullir jjajjjaja 90 dias desde que se empezaron a germinar son semillas de gbstrains bajo los leds de gblightning y abonadas con boom nutrients todo gracias a @gbthegreenbrand @growbarato

Week5 The week is over and all looks fine. Both ladies are preparing to bloom and are growing. Orange Sherbet is now 28 cm tall. Bruce Banner has caught up a lot this week and is at 25 cm. For 1 liter of water there was 0.5 ml of silicate;; 0.5 ml of Calmag;; 2 ml of BioNova BN-Zym, 2 ml of BioNova TheMissingLink;; 2 ml of BioNova Auto complete fertilizer and 1 ml of 100% organic algae juice. Ph 6.0-6.3 23°C

Mandarin dream ladies moves into week 11 with a transfer to their final pots and some LST. They look healthy and should respond nicely to the transfer. Bonus video of my veg room. Thanks for stopping by 👽🌳

Evertyhing looks fine. A lot of small buds - let´s see how they will develop.

Buds starting to form more. Defoliated/leaf-stripped on day 21

Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁