Likes
Comments
Share
@Enki_Weed
Follow
Aktueller Zustand der Pflanze (siehe Bild): Die Pflanze präsentiert sich aktuell in einem hervorragenden Zustand und entwickelt sich prächtig. Trotz der Herausforderungen, die wir im Laufe dieses Grows hatten, sind die Ergebnisse mehr als ermutigend. * Wuchsform: Die Pflanze hat sich sehr buschig und kompakt entwickelt, mit einer Vielzahl von gut ausgebildeten Seitentrieben, die alle dicht mit Blüten besetzt sind. Dies deutet auf eine exzellente Lichtausnutzung und eine gelungene Verzweigung hin, wahrscheinlich durch gezieltes Training in der Vegetationsphase. * Blütenqualität: Die Buds sind auffallend dicht und zeigen eine beeindruckende Harzproduktion. Die Trichome sind bereits deutlich sichtbar und glänzen, was auf eine hohe Potenz und Aromaentwicklung hindeutet. Die Stigmen (Blütenhärchen) sind größtenteils bernsteinfarben verfärbt, was auf eine fortgeschrittene Reifephase hinweist und die bevorstehende Ernte ankündigt. * Blattgesundheit: Die Blätter sind weiterhin größtenteils grün und vital. Einige der größeren Fächerblätter im unteren Bereich zeigen die für die späte Blütephase typischen Vergilbungen, da die Pflanze ihre letzten Energiereserven in die Blütenbildung umlagert. Dies ist ein natürlicher Prozess und kein Anzeichen für akute Mängel in diesem Stadium. Herausforderungen und Erkenntnisse aus diesem Grow: Wir hatten im Laufe dieses Durchgangs mit einer Volatilität des pH-Wertes zu kämpfen, die zeitweise nur schwer zu stabilisieren war. Dies führte zu der Notwendigkeit, den pH-Wert der Nährlösung häufiger anzupassen. Nach genauerer Beobachtung wurde die Hauptursache für diese pH-Schwankungen identifiziert: Algenbildung auf der Oberfläche der Steinwolle. Diese Algen konkurrierten nicht nur um Nährstoffe, sondern trugen auch maßgeblich zu den instabilen pH-Werten bei. Learnings für den nächsten Grow: Um die Algenbildung und damit die pH-Problematik zukünftig zu vermeiden, sind folgende Maßnahmen geplant: * Reduzierung der Steinwollwürfel-Größe: Es werden kleinere Steinwollwürfel für die Keimung und Startphase verwendet. * Einsatz von mehr Tonkugeln (Leca): Die Steinwollwürfel werden im nächsten Grow deutlich besser mit Tonkugeln abgedeckt, um die Oberfläche vollständig vor Licht zu schützen. Dies wird die Algenbildung effektiv unterbinden und somit zu einem stabileren pH-Wert beitragen. Ausblick: Trotz der aufgetretenen Schwierigkeiten bin ich mit dem aktuellen Zustand der Pflanze äußerst zufrieden. Sie ist ein starkes Beispiel dafür, wie widerstandsfähig diese Pflanzen sein können, wenn die Grundversorgung stimmt und auf Probleme reagiert wird. Ich freue mich auf die bevorstehende Ernte und bin gespannt auf die Qualität des Endprodukts.
Likes
29
Share
@Flower420
Follow
Lowered the PPMs to 420 😎 Only added base nutrients. Her buds are still creating lots of resin and are getting thicker. Ripening nice with an elegant aroma of sweet citrus. I can’t wait to try her out soon! Next week will be her flush week, then time to harvest! I had to use zip ties on some of the bud sites due to how heavy they are. Next grow- definitely Doing LST right and different hydro set up. DWC is a great learning curve for hydroponics, but what a pain in the tush every week for feeding. Bottom line- I’m loving what I’m learning and I’m having fun doing it! 💜
Likes
5
Share
@Weedseed
Follow
Muy buenas geneticas las de fastbuds a mi me dejan loco las recomiendo a todos los cultivadores esta es la ultima en indoor hasta que acabe el verano ahora empezaremos con la exterior, expresando nuevas geneticas para poder mostraros mas sobre este grandisimo banco de semillas
Likes
24
Share
03/23/25: I’m very pleased with the progression of this grow so far. All five plants are showing consistent and vigorous growth, and each one has maintained the same level of vigor and size relative to the others since sprouting. This consistency is a good early sign of genetic stability and uniform structure, which will help with canopy management as we move further into veg. At this point, each plant is developing its 4th and 5th nodes, which is a key marker in early vegetative growth. Once the 5th node is fully established, I’ll consider topping or training, depending on the growth structure and the phenotype expression of each plant. After removing the humidity domes last week, I noticed that the first set of true leaves—which had been sitting in high humidity—developed browning on the edges. This is a common reaction when leaves are exposed to open air after having retained too much surface moisture. Fortunately, this issue was limited to the oldest leaf set. All new growth has adjusted perfectly to the environment inside the tent, showing healthy development and no further signs of stress. The plants’ deep green color indicates that they are receiving sufficient nitrogen, which is essential during this stage of growth. Additionally, some of the larger fan leaves are beginning to curl slightly inward, which may look concerning at first, but is actually a natural response to airflow. The plants are adjusting to the oscillating fan in the tent—modifying their leaf shape to be more aerodynamic. This airflow helps: • Strengthen stem tissue through gentle mechanical stress • Promote root zone development as the plant adjusts its internal resource allocation • Increase resilience to environmental fluctuations So far, no roots are visible at the bottom of the starter pots, but I expect them to show in the next couple of days. As soon as they do, I’ll transplant each plant into 1-gallon AirPots. AirPots encourage rapid root pruning and horizontal expansion, which leads to more efficient nutrient uptake and a healthier root system. Once the transplant into AirPots is complete, I’ll provide a full update along with new photos showing their root development, new environment, and how they respond post-transplant. Everything is looking on track, and I’m excited to see how each of these phenotypes continues to express themselves over the next phase. 03/25/25: Today I relocated all five plants from the 2x2 seedling tent into their permanent home: the 4x4 AC Infinity grow tent. This is an important environmental shift, so I’m allowing the plants some time to adjust before making any further changes like transplanting. They’re now sitting under the AC Infinity S44 grow light, which is currently set to 20% power. The light is positioned 24 inches (approximately 61 cm) above the canopy. According to my budget PAR meter, the plants are receiving around 350 PPFD, which is a safe and effective intensity for young vegging plants still acclimating to their new space. Although the original plan was to transplant them into 1-gallon AirPots around this time, I’ve decided to delay that by a couple of days. Environmental shifts—like new lighting, airflow patterns, and spatial layout—can stress young plants, so I want to give them time to adjust before introducing transplant stress. This move also gave me a chance to set up the AC Infinity AI+ Controller, which I won in a contest last year (huge thanks to AC Infinity). So far, my first impressions are positive: • Setup was just as smooth as their other controllers. • It’s already doing a great job managing the environment passively. • I haven’t explored all of its automation features yet, but I’m excited to see how much precision it can offer, especially for managing VPD and dialing in climate conditions throughout veg and flower. Once the plants have had time to settle into the new environment, I’ll transplant them into their 1-gallon AirPots and provide a full update with photos.
Likes
8
Share
This time the plant grew up pretty big buds but in the last 2 weeks the climate turned to summer so my plant was under heat stress and showed signs of herma but nonetheless it is a very wonderful plant.
Likes
13
Share
Eccoci qui... Finalmente dopo uno stop per il lavoro torno ad aggiornare il diario con il capitolo finale... Sono molto soddisfatto di come questa piccola sia cresciuta e di quello che mi ha lasciato come raccolto davvero molto molto interessante. Super resinosa e compatta per non parlare dell'odore, una cosa speciale!!! Grazie ad Anesia Seed e ad Xpertnutrients per la collab e a tutti per il supporto🔥🌲❤️ NE VERRANNO DELLE BELLE
Likes
Comments
Share
Likes
36
Share
@starke
Follow
I don't know where to start and I must admit I'm completely overwhelmed by this beautiful beautiful plant ❤️❤️❤️ Aaaaaaaaaaaaaaaaaaaaaaaaaaah, I'm so happy 😍😍😍 She is a blessing! Excuse the outburst, but she is magical ☀️ I applaud you guys at Humboldt for creating such a wonderful strain 🙌 Some details upfront, before I rave some more: - 134 Days in total: 70 Days in Veg, 64 Days in Flower with 128W LED in a 60x60x160cm tent - 7 Days Drying regularly, 9 Days Drying in the Fridge - 432g - Wet weight with stems - 103g of those for Fresh Harvest Infused Oil - 190ml Olive oil with 30mg/ml THC & CBD - approx. 20g dry (for dry weight calc.) - 87g for the DrZiggy's Low And Slow Drying in the fridge - 20g dry - 242g for regular Drying @50% RH and 22°C - 55g dry - 30g dried sticky trim in the freezer Summary of my growing experience with this strain: She takes well to massive training and a little neglect in the beginning, meaning she recovers well, which is what I want 😊 I didn't experience any major deficiencies. She had a little nitrogen deficiency during the later veg phase, which she showed with lighter green leaves. I blame this on my long veg time and my pot size of only 11l. She consumed all her soil and nutes by the end of veg. I will keep that in mind for my next grow. Since I increased my nitrogen levels so close to flowering phase, I overdid it a little on the nitrogen which showed a little bit during later flowering phase with downwards clawing leaves. So I will be more careful with nitrogen especially while transitioning into Flower. I did not flush this plant and she smokes already beautifully mild after only a couple of days of curing. Drying her took 7 days in the tent and 9 days in the fridge. She crusted up with lots of stickiness while drying and gave off a good bit of scissor hash & kief when trimming. Smoking her is a great and different experience to me. It's my first time with a 1:1 strain and I can definitely notice the CBD content. She shows in a very well balanced body high with a slight and gentle knock on the THC door. The first couple of days I felt a craving for higher THC which settled down after only a couple of days. Very interesting and definitely worth growing. So you guessed right, I totally recommend growing this beauty. Especially if you are interested in exploring a 1:1 THC:CBD strain with all its magical medicinal values 🙏 Why I grew this strain: Like @Experimentgreen on here, I grew this strain for my Mama ❤️ She is open minded to trying to solve some of her health issues with these beautiful plants and the magic they bring but she also likes to have a bit of fun, she doesn't mind. So a 1:1 strain was quite handy. She suffers from neuropathic pain, arthritis in her joints, restless legs and insomnia. All very relatable issues and perfectly suitable to be introduced to some good CBD and THC content. She already has a little tolerance, since she is treating her restless legs with gummi bears I made with a strength of 1.5mg/gummi bear. This small dose already helps her on a daily for her restless legs. Beautiful 😍 So with this special mission in mind, I wanted to process the plant with only the very best options and create Cannabis Oil (Capsules) for my Mom to take. I chose a method called "Fresh Harvest Infused Cannabis oil" by the wonderful member SweetSue over at 420magazine: https://www.420magazine.com/community/threads/fresh-harvest-infused-cannabis-oil.363371/ I hope it's ok to relink, no need to duplicate already existing and well researched content, right? I will not go into detail and def. recommend reading through the whole thread. I only document the short version here, but feel free to ask me, I'm happy to share my experience. The oil I made has 30mg/ml of THC and CBD. That's a good value. I calculated the strength the following: 75g fresh Flower in 200ml Olive Oil - with 10% CBD&THC 85% extraction efficiency with the infusion method 85% * 10% THC&CBD = 0.0850 0.0850 * 75g = 6.375 gram of available THC & CBD 6.375gram * 1000 = 6375mg/THC 6375mg/CBD 6375mg/200ml = 31.875mg/ml CBD & THC I created capsules with 3mg per capsule. We are currently trying to find the right dose for her. She started taking one capsule 60-90min before bed for 3 days now and will increase by 1 capsule tonight. We continue until a max dose of 15mg/day but always re-evaluate how she feels. She's documenting her experience quite cute. Very heartwarming and powerful. So far she sleeps better and she falls asleep faster, which she hadn't done in a long while. Onset is pretty precisely between 60 and 90 minutes. She has not had any restless legs so far. I'm excited for her and can't wait to see where this takes us. I also made her a salve/creme she uses as a topical on her joints. When she uses it early enough, before the big pain hits, she feels it helps. Of course this is not a science study and everything is purely based on personal experience. I thought I share, in case anyone is interested, also I want to give back a little, since I consume so much knowledge from all over the internet, including here, so thanks 🙏
Likes
16
Share
Solid enough week buds fattening up nicely and getting very frosty
Likes
35
Share
Week 8 +-, She got another cleanup, removing lower leaves and branches. I always keep the lower third of my plants clean, especially with hydro plants it helps with ariation. Feeding is still the same as before, no changes, its just a case of refill the res every 3 days +- and change and clean res every 7 days roughly. This rythm will continue till we hit a later stage of flower where we will add Green Sensation.
Likes
8
Share
@Bryankush
Follow
Il fumo è liscio e abbastanza dolce e fruttato con aromi che ricordano uno sherbet di arancia, anche piuttosto denso.
Likes
9
Share
Producing more resin now colas are starting to fill in Typical jack herer fuel smell coming from them Buds look quite light green at this stage EC 1.5 Coming up to the half way mark on a 10 week strain flowered early at 19 days of light after germination Normally plants flowered that have received fewer than 30 days veg tend to look a little bit behind schedule until week 6 to 7 when they catch up So far the SH pheno & the Fire OG are maturing at a standard rate at 35 days of flower they look like 28 to 30 days worth of flower development I expect this to catch up by day 45 at day 45 they should look like a standard 45 days of flowering development The slow phenotype has only been allowed a little bit of space this one looks like a 12week + plant I will only allow it 10 weeks it's too small to be worth waiting for her to finish Day 37 Removed some leaves at the middle of the canopy to help with light penetration Day 39 resin production and colas filling in has increased significantly over last few days starting to smell like pine along with the fuel no citrus smell
Likes
327
Share
@FoTwenny
Follow
Fo' Twenny here! Welcome back to my garden! Thanks for following me on this 16 strain photoperiod SOG grow adventure! We have 18 strains running with 2 regular strains, I want to be sure we can fill up the whole SOG. 9/7 - Just to recap last week. 9/5 I transplanted from the 16 oz solo cups into a one gallon 8" tall Active Aqua 6" x 6" Square Pots. Today, I topped and defoliated. Everything is looking good, now just waiting for them to bounce back. Hoping to be ready for flower within next week or two. This is my first run using a modified SOG method, and not sure how long it will take for them to be ready. Ideally I'd like each main growing shoot to be about 12" or so before sending to 12/12. BAD NEWS: Half of the blue diodes have gone out in the TMLAPY light. This light was actually gifted to me shortly after a friend purchased it from Amazon and realized it was too small for their space. It seemed to be serving it's purpose well for vegging photos and running bumper crops of autoflowers but it failed only four months after the warranty period ended! Weak-Sauce! Welp, looks like it's time to upgrade the 24"x48" tent to Samsung LM301H boards. I ordered a 320w straight single piece heatsink with 3 boards from Geeklight. I went with the 3k spectrum and switchable UV/IR since all my autoflowers bloom under this light. RHIZOSPHERE: .25 tsp/gal Blue Planet Gold Shield Silica Supplement .25 tsp/gal Fox Farm Gringo Rasta Cal-Mag 1.5 tsp/gal BigBloom .25 tsp/gal Boomerang .125 tsp/gal Wholly Mackerel PPM: 749 pH: 6.4 1 tsp/gal Southern AG Garden Friendly Fungicide compare to Hydroguard 2 TBSP/gal Serenade Thanks for stopping by my garden! Please check out my other diaries & give me a follow! Happy growing my friends! ☺️🌱 Peace, ☮️✌️ Love, 💚🤟 & Frosty Nugs! ❄️🌲 - Fo' Twenny
Likes
Comments
Share
Likes
19
Share
Flowering day 68 since clock change to 12/12 Hey guys :-) . It's so far, the lady is ripe and will be cut at the bottom end in the coming days and hung upside down in the drying tent :-) . Next week there will be an extra update on how they are hanging. Watering would be done twice this week with 1 l each (nutrients see table above) Otherwise it was checked and everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://gardenofgreenseedbank.com/candyland/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
15
Share
Die Vollendung Bis zur Ernte zeigt sich die Dancing Sprite (Seeds of Anarchy / Wunderbohnen) in ihrer ganzen majestätischen Pracht; die dunklen Blätter bilden einen harten Kontrast zu den hellen, fast weiß wirkenden Blütenköpfen. Die schwere Last der massiven Buds wird bis zur letzten Sekunde durch die installierten Stützen gesichert, während das "runtzige" Aroma seine maximale Intensität erreicht hat. Mit dem Tag der Ernte endet ein faszinierender Durchgang, bei dem die Pflanze durchgehend mit ihrer Vitalität und einer extremen Harzschicht überzeugt hat. Es ist Zeit, diese erstklassige Qualität in die Trocknung zu überführen und Platz für neue Projekte zu schaffen.
Likes
54
Share
@MrJones
Follow
MrJones Cream Mandeiran Auto XL - ViparSpectra XS2000 240W Infrared Full Spectrum LED Grow Light ´🍪⊱╮🍪╰⊰🍪 WEEKLY GOALS 🍪╰⊰´🍪⊱╮🍪 🏡Indoor - 3"x4"x8" Custom Built Grow Closet 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 🌾LST and Defoliation - this strain likes to stretch! 🗓️Week 2 Seedlings ⚱️5-Gallon 📊6.2 PH 💧 Feeding / Using Dr. Earth Dry Organic Amendments - Home Grown & Bud / Bloom Booster 🌞ViparSpectra XS2000 240W x2 Infrared Full Spectrum LED Grow Light 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between products each month for Integrated Pest Management. ´🍪⊱╮🍪╰⊰🍪 PLANT UPDATES 🍪╰⊰´🍪⊱╮🍪 📝 Notes - Girls are just blowing up, they have doubled in size and started producing their second and third nodes, the leaves look perfectly healthy! The ViparSpectra XS2000's are just killing it! ╰⊰🍪╰⊰´🍪⊱╮🍪╰⊰🍪╰⊰🍪╰⊰´🍪⊱╮🍪╰⊰🍪╰⊰🍪╰⊰🍪⊱╮ 🔶Sunday 06.20.21/ Continuing feeding just H20 PHed to around 6.0/6.5 🔶Monday 06.21.21/ Continuing feeding just H20 PHed to around 6.0/6.5 🔶Tuesday 06.22.21/ Continuing feeding just H20 PHed to around 6.0/6.5 🔶Wednesday 06.23.21/ Continuing feeding just H20 PHed to around 6.0/6.5 🔶Thursday 06.24.21/ Continuing feeding just H20 PHed to around 6.0/6.5 🔶Friday 06.25.21/ Continuing feeding just H20 PHed to around 6.0/6.5 🔶Saturday 06.26.21/ Continuing feeding just H20 PHed to around 6.0/6.5 ╰⊰🍪╰⊰´🍪⊱╮🍪╰⊰🍪╰⊰🍪╰⊰´🍪⊱╮🍪╰⊰🍪╰⊰🍪╰⊰🍪⊱╮ Cream Mandarine XL Auto®️ Information Tall-stemmed auto-flowering strain. This high-yielding 4th generation auto-flowering strain is the resulting hybrid from the cross between selected specimens of our Cream Mandarine Auto®️ (SWS29)) and a Super Tai’98 elite clone. The genetic coming from the Super Tai’98 elite clone contributes with interesting Sativa characteristics to this hybrid, such as bigger size, but also subtle aromatic and spicy tones with hints of wood and nuts. The so much appreciated Cream Mandarine Auto®️ genetic contributes with traits from the Indica side, such as high flower and resin production, but also sweet and fresh aromas with tones of citric fruits of the mandarin orange type. DATA SHEET Variety SWS55 Indica: 35% / Sativa: 63,4% / Ruderalis: 1,6% THC: 18-23% · CBD: 0,6% Indoor Yield: 450-650 g/m2 Outdoor Yield: 50-300 g/plant Indoor/Outdoor Harvest: 9 weeks from germination Height: 110-150 cm
Likes
Comments
Share
Alles läuft sehr gut ich bin stolz
Likes
13
Share
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️