The Grow Awards 2026 🏆
Likes
Comments
Share
Likes
16
Share
@Spitt4121
Follow
All plants are growing well. Started LST on them, am using some string and hard wire for now but have some soft plant ties coming tomorrow. Its my first time doing LST, am I doing it right? Reference in video
Likes
110
Share
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen
Likes
2
Share
@Nebula
Follow
Looking forward to this yummy strain. Seems like she is slow to push her leaves out. I am hoping that some more air will get things going. Organic Grow on this run using GreenGro.
Likes
125
Share
MAY 20TH - TODAY is the first day the plants wake up from their 18/6 cycle down from 2 weeks at 20/4. They got their first SCHWAZZE and shaping at this stage getting them ready to grow into the beautiful sea of green each of these beds are to become. The uniformity of the clones reminds me how much of this has become muscle memory to me, From doing thousands of plants per grow this has become second nature for me. The ladies are 100% organic at this point and our feed I am considering releasing it for anybody who is interested as a way to fund raise at the same time ! If anybody is interested in the recipe let me know in the comments, If we get enough interest I will put up a site that will constantly update with each weekly feed & steps done on the plants. ANNOUNCEMENT : ** It has taken me 20 re trys & double the amount of ERROR codes to get this update LIVE. I will be staying on this website until the end of this grow year, Then I will be setting up a Patreon & migrating over to Patreon and Twitter ( X ) I am completely done with GROW DIARIES.** SUPPORT OUR SPONSORS !!! PROMO CODE GREEN PLANET : LEGACY PROMO CODE MARS HYDRO : LEGACY PROMO CODE SEEDSMAN : LEGACY10 MAY 22ND 2024 - SCHWAZZE COMPLETED YESTERDAY. These photos where taken DIRECTLY after their SCHWAZZE. NOW 2-3 WEEKS of 18/6 then another SCHWAZZE, Top DRESSING of Mineralized Phosphate, Power Bloom and Glacial Rock Dust and swap to 14/10. We will be using 14/10 for 3 weeks then going to 12/12 to flower these beauties out. MAKE SURE TO FOLLOW OUR SOCIALS & JOIN OUR GREAT COMMUNITIES ! TWITTER : https://x.com/LegacyMrketFarm YOUTUBE : www.youtube.com/channel/UCR89iF2Iqy3zlHZhFfU2MMg YOUTUBE GAMING : www.youtube.com/channel/UCw8-qCFg-PUf00waTO5JOGw
Likes
44
Share
The gap between where you are and where you want to be is measured in decisions, not dreams. Dopamine release is not the pursuit of happiness; it's the happiness of the pursuit. "Mens Dei" Cannabis buds can expand or swell in warmer conditions, but this is not necessarily a desirable effect. High temperatures can cause the buds to become airy and loose, reducing their density and potentially impacting potency and aroma. First 4 weeks flower, blazing hot expansion of buds, 4 weeks after cool off? Why?? What can be made to expand, airy and loose, can also be made to contract, dense and tight. Why? Trichomes do not discriminate, although we like to think of trichomes' primary purpose as being to get us high; they are there to provide photoprotection (sunscreen). Trichomes apply themselves based on area dimensions; the more area = the more trichomes in order to protect. Different from density: Trichomes, the resinous glands on plants, are often produced in response to stress, including high light intensity. This increased production can lead to denser trichome coverage on the plant, stress, stress, stress, stress is the signal. There is a certain beauty in watching the large water-filled buds once swollen to the brim slowly shrink during drying, as the surface areas contract, the trichomes just cluster up to form denser and denser coatings, already dense from high light intensities, UVB exposure, and IPS, and every other stressor I could tweak. Trichomes, the resinous glands on cannabis plants, are often produced in response to various forms of stress. These stresses can be environmental, like excess light(HIL) or UV-B radiation, temperature fluctuations, or drought, or mechanical, such as wind, pruning, or even the weight of the plant's own buds. The plant reacts to these stressors by increasing trichome production as a defensive mechanism to protect itself and its valuable compounds like THC and CBD. In essence, cannabis plants perceive stress as a threat and respond by producing more trichomes as a way to protect themselves and their valuable compounds. Several studies have shown this. Not so much a "master" grower as a master of stress. Psssst. Tip. Trichomes fill with "antioxidants," including THC. Ant"ox"idants, The production of antioxidants in plants is intricately linked to their oxidative apparatus. The plant has limited oxidative capacity/apparatus. During daytime photosynthesis, a large percentage of that oxidative capacity is tied up in protecting the plant. During the night, plants alter their metabolic pathways. This leads to a far more focused production of specific antioxidants, like THC. Plants also produce antioxidants during the day. Excess light, for example, can trigger the production of excess antioxidants as part of their defense mechanisms against reactive oxygen species (ROS). The differential ROS production by blue and IR light can have significant biological consequences. For example, high levels of ROS induced by blue light can lead to cell damage and death, while lower levels of ROS produced by IR light may be involved in beneficial cellular signaling pathways. Long nights under the IR (very low ROS), the boost in cellular respiration, and the boost in energy production. In a perfect world, I'd give the plant a shock treatment of 60DLI in 4 hours and give her the other 20 hours to perform cellular respiration under IR. The stress of those 4 hours would be rigorous and full of stress abound, 1800-2000ppm CO2 is easy for a couple of hours during daylight, it's maintaining it that's hard, but 4 hours is very doable with nothing but a little extra "carbon sugar" in your medium every other night during the first 4 weeks of flower. In my opinion, you only need to jack CO2 for those first 4 weeks of flower to see maximal output, after that it's all about trichome preservation, everything else comes second. Without the temps to assist with metabolism, CO2 is reduced to normal levels along with temps 4-5th week of flower. Buds are primarily composed of water. Developing flower buds, like other plant tissues, require a significant amount of water for growth and turgor pressure, which helps maintain their structure and firmness. Turgor pressure in plant cells is primarily generated by osmosis, but transpiration plays a crucial role in maintaining it. The optimal internal leaf surface temperature for photosynthesis at 1800-2000ppm CO2 is likely in the upper range of 97°F, meaning ambient would need to sit at 102°F-ish or thereabout for full metabolic utilization. That's putting your transpirational pulling force x5 x6 maybe x7 of what it would be if she were cruising at 68F. "My buds won't fatten, what can I do!!" Crank that bitch. If your purpose was to blow up a balloon as fast as you can, as much as you can, would you use 2x force or x5 Force to do so? Bad analogy, but you get the idea. Kiss. Optimize photosynthesis & VPD by day, cellular respiration by night. TECHNICALLY: "While transpiration and cellular respiration are both ongoing plant processes, they are not neatly separated into day and night. Both processes occur both day and night, though at different rates and with different emphasis. Transpiration, the release of water vapor from plant surfaces, is primarily driven by sunlight and photosynthesis during the day, but it also continues at a lower rate at night. Cellular respiration, which provides energy for the plant, occurs continuously, both day and night. " BUT Only 10% ATP can be processed through photosynthesis and carbon capture. 90% of ATP is processed when the plant's oxidative capacity becomes available (NIGHTTIME). Cellular respiration relies on the process of oxidation to generate energy. Specifically, the final stage of cellular respiration, called oxidative phosphorylation, utilizes oxygen as the final electron acceptor to produce a substantial amount of ATP, the cell's primary energy currency. Several environmental factors can hinder cellular respiration in plants. These include low oxygen levels, temperature extremes (both too high and too low), humidity, water stress, and the presence of toxins. These factors can impair the function of enzymes involved in respiration, disrupt the availability of substrates, or directly damage plant tissues, thus reducing the rate of cellular respiration. Factors such as oxygen concentration, glucose availability and temperature will all impact the amount of aerobic respiration an organism will perform. See you next grow, *twiddles thumbs* Signum Magnum. Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim Cantáte dómino cánticum novum Quia mirabília fecit Gloria pátri, et filio, et spirítui sáncto Sicut érat in princípio, et nunc, et semper Et in saécula saeculórum, amen Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim Cantáte dómino cánticum novum Quia mirabília fecit Gloria pátri, et filio, et spirítui sáncto Sicut érat in princípio, et nunc, et semper Et in saécula saeculórum, amen Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim Cantáte dómino cánticum novum Quia mirabília fecit Gloria pátri, et filio, et spirítui sáncto Sicut érat in princípio, et nunc, et semper Et in saécula saeculórum, amen Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim
Likes
226
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 9/18/21 😺 Week 4 of flower!! Everyone is looking pretty good but the mainlined plant seems to be locking out calcium again (and they're clawing slightly, this is on me, I was pushing it lol)..its early but we've increased calcium supplements by 3ml, cut all grow solutions and PK feeds consistent ..we'll update on this again midweek.. thanks for reading grow family and happy harvests!💡🌱 😽💨 Week 4 on YouTube: https://m.youtube.com/watch?v=EL-n5MUawFY ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
14
Share
Day 42. General Hydroponics maxigro every other watering. Frosting up nicely.
Likes
5
Share
The pictures don't do these buds justice. They are a brilliant purple and orange color. I have definitely outdone myself for my first grow ever. These buds have that perfect subtle smell and taste of blue salt water taffy. It's brilliant. I couldn't get it to reveg which is a disappointment but it will live on in my memory
Likes
11
Share
02 Feb 2022 Update: I noticed a strange chromatic coloring on some leaves of the "older" plants, a couple of the smaller plants have small brown spots on the leaves ... i also noticed that the grow tent is quite hot and the ground is quite dry, could be that the watering maybe is not enough, so from today i'll give a bit more water. I didn't expect that kind of temp from a led, adjusting the watering should goes better. Light regime ☀️21/3🌑 temp ☀️22/32 🌑 18.5/22 humidity 48% The lamp is till running it at 100% of his power but I just moved the lamp up to 70cm from the ground for more air flow and maybe the leds where to near the leafs, this why the chromed coloring on leafs? 03 Feb 2022 Update: Light regime ☀️21/3🌑 temp ☀️24/28 🌑 18.5/24 Plants looks already more happy now!!! soon photo/video update 04 Feb2022 Update: Little check and evrething looks great now, the new distance of the lamp did the magic , temperature is also much much better and stable, all plants look bit happyer now 😁 Light regime ☀️21/3🌑 temp ☀️22/26 🌑 20/18 humidity 51% 07 Feb 2022 Update: With a Lamp distance of 70cm at 100% is going really good, temperature is right and the earth in the pots also stays moist longer, the new leaves on all plants are doing well and the two "older" plants are doing a lot of side arms. In the last couple of days I have been noticing an increase in the speed of growth. The little BlackBerry Banana is staying small but is making new leaves that look healthier than the plant was born, I wait another week before deciding what to do but most likely I will pull her out of the tent and she will grow as an outdoor plat looking out the window 😂 Light regime ☀️21/3🌑 temp ☀️22/26.9 🌑 19.5/22 humidity 59% 08 Feb 2022 Update: After a little thinking i decided and Ijust moved the small BlackBerry Banana plant out the tent for a "Free" grow ☃️🌈🌤️ 😅😅 More air/co2 space and lamp ☀️ for the other 8 plants. Sometimes have to do wha need to be done.
Likes
5
Share
@Mz876
Follow
I was slightly disappointed with the yield but I’m content with the taste and affect that I got from the plant .
Likes
43
Share
Gracias al equipo de Sweet Seeds, MarshHydro y XpertNutrients, sin ellos esto no seria posible 💐 🍁 Purple Punch OG: variedad resultante de la hibridación entre un clon élite de Purple Punch (Larry OG x Grand Daddy Purple) y un clon élite de Star Killer (Skywalker OG Kush x Rare Dankness #2). Dos genéticas campeonas de reconocido prestigio en la escena cannábica internacional. Variedad principalmente índica, de estructura compacta, con un gran cogollo principal y robustas ramas laterales. Produce cogollos densos cubiertos de abundante resina muy aromática. La producción de terpenos es muy alta, muy apropiada para la extracción de concentrados. Debido a su ancestro Grand Daddy Purple, algunos individuos pueden mostrar tonos morados o rojizos en flores y hojas. El aroma y sabor es delicioso y complejo, dulce y afrutado, con tonos OG Kush muy especiados y pinceladas de limón. El efecto es intenso y relajante. 🌻 🚀 Consigue aquí tus semillas: https://sweetseeds.es/es/semillas-fotodependientes/3190-purple-punch-og.html 💡 Mars Hydro TS 3000, como la lámpara de cultivo LED más grande de la serie TS, ofrece suficiente cobertura para un área de 4 × 4 pies con un precio asequible y rendimientos de calidad; a cambio, se puede aplicar tanto al cultivo doméstico como al cultivo comercial. Potencia - 450w Cobertura Vegetal – 5×5 pies Cobertura de flores - 4 × 4 pies La opción abrumadora para la mayoría de los productores que la aplican en tiendas de campaña. Consigue aqui tu lámpara: https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 📆 Semana 10: Última semana de esta maravilla de la naturaleza, ha quedado limpia y con unos cogollos duros y llenos de resina. Los colores son admirables, tonos morados, grisaceos y el contraste blanco de la resina es impresionante Defoliacion para una mejor penetración de la luz en la parte baja de la planta. Una semana de lavado de raiz a base de agua de manantial y al secadero.
Likes
96
Share
💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are bad to do it all over again 😁 So what do you say we have some fun 👈 We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds Well we are just 63 days and folks shes doing pretty good 👌 She's going to be chopped here in the next day or too 👈 So I am super happy thus far👍 smells awsome 😊 very sweet 😊 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a UR45 to the mix👈 www.marshydro.ca 👉I am using Agrogardens for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.agrogardens.com 👈 Agrogardens Cal MAG Agrogardens Grow A+B Agrogardens Bloom A+B Agrogardens Bud Booster Agrogardens PK13/14 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈
Likes
18
Share
@Diips
Follow
d.85 really fading hard, and buds are growing in size. just letting her do her thing, we are taking this to the end. also got my humidity down. d.87 buds are fattening up 😍 all i have to say about that is, bigger boots, bigger roots = bigger fruits. mainlining is possible with auto, as long as you choose a big enough pot size and time the topping and lst. after that part is done, then the auto just needs time to do its thing.
Processing
Likes
61
Share
@Verlido
Follow
Week 11 - Day 1 : Pinched branches from subject 1 and 2. As seen in the videos uploaded. Week 11 - Day 2 : Changed water schedule to water-water-feed, watering my plants with 4 Liters per plant every 3th day. Pinched branches recovered successfully. Week 11 - Day 3 : Pinched lower branches of subject 1, take a good look and tell me what you think! Week 11 - Day 4 : Pinches branches of subjects 2 and 3, take a good look and tell me what you think! Week 11 - Day 5 : Pinches branches of subject 1, take a good look and tell me what you think, had my first harvest of ladybugs in the garden and released them on my plants, noticed that I have very little spider mites on my plants. Posted week 1 to 9 on my diary. Week 11 - Day 6 : Woke up to subject 5 being damaged, What could have caused this? Too heavy branches? Maybe an animal that accidentally broke the branch and took off. Week 11 - Day 7 : Pinches branches of subject 3, take a good look and tell me what you think!
Likes
55
Share
- i'm back already! i decited to harvest today on day 93, there was about 5-10% amber so i din't want to wait any longer! - all pics are from right before/during/after harvest - the 2 lowest branches are trimmed up and drying in a brown paper bag, the rest is drying in my carboard box - i will be back with a harvest report and smoke report in about 10 days when everything is nice and dry. - added 3 videos at the end so check em out
Likes
7
Share
@GrowFOUR
Follow
ppm at 1100 Second flush 3 days after first because ppm's were still rising after each day. Brought ppm down to 850 for second round of defoliation at day 49. I wanted to do it at day 42 but I didn't want to stress her more after me being away for 12 days.