She is stil really small and with the very slow start its at a slow pace. Main stem is very thick and firm though. Im still keeping her and see what happends. I started to top already and with some LST for the Scrog.😞

And off we went, the adventure with Zamnesia's F1 Hybrids started off great, with a stunning 100% germination 8/8 born without any hesitation after a very short time in water and subsequently in soil. She is precisely at the 10th, she is Runtz, she grows well regularly and very similar to the twin. One of the characteristics of the F1 Hybrids is stability and for now it has been thoroughly demonstrated since day 10. For the rest we have to say everything is going very well, the parameters are in order, the girls were born in a biodegradable jar which biodegraded a little earlier than expected and I proceeded with the potting, no repotting, be careful the seedling never came out of the jar biodegradable the roots pass it at a certain point of decomposition. So we are now in a comfortable 11 liter house that is perfect for autoflowering in my opinion. Unfortunately the Zamnesia pots are about to arrive but I didn't have them in time I preferred to repot them for the sake of the plants, we have to photograph them of course but first and foremost I'm a grower and I care about the health of my little girls. Something tells me we will be growing a lot of Zammi plants so we will use them in the Official Grower version next time. As for fertilizers, I'm doing a small comparative experiment to finish off the fertilizers I had at home, it's not 100% indicative, it's only on two specimens but given the stable genetics I decided to try to compare the results of Plagron Vs Aptus, both excellent brands which they will certainly produce beautiful plants which are already of excellent stable genetics. In the next few weeks the comparison will be more evident now the seedlings are still very small and just potted. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io Runtz F1 seeds specifically https://www.zamnesia.com/10662-zamnesia-seeds-runtz-f1-automatic.html Site Description ZAMNESIA - RUNTZ F1 HYBRID AUTOMATIC: UNIFORMITY, RELIABILITY, AND GREAT FLAVOURS! What can we say about Runtz that hasn't already been said? Well, trust us when we say you've never seen it quite like this before! From the team at Zamnesia comes Runtz F1 Automatic. Now, this isn't some Formula One car-related special edition, no. This strain takes everything you know and love about the original Runtz and offers a reliable and uniform growing experience that will impress everyone. GROWING RUNTZ F1 HYBRID AUTOMATIC Runtz F1 Hybrid Automatic is the lovechild of Gelato and Zkittlez; the result is a strain that's extremely vigorous and fast to flower (taking just 10 weeks from germination to harvest). While autoflowers generally make for a no-hassle growing option, F1 hybrid seeds take this ethos one step further. Runtz F1 Automatic showcases great uniformity, meaning all plants will have a remarkably similar appearance and output. These plants are also highly resistant to pests and disease, so if it's your first foray into the world of cannabis cultivation, you're in the right hands with Runtz F1 Automatic. Reaching heights of 55–75cm, Runtz F1 Automatic can slot into the pokiest of grow spaces, both indoors and outdoors. But this small stature is not to the detriment of production. Once ready, growers will be treated to a return of around 500g/m² indoors and 100–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF RUNTZ F1 HYBRID AUTOMATIC Another perk of F1 hybrid genetics is that these plants are teaming with terpenes and cannabinoids, making for a pungent and potent experience you're unlikely to see with other strains. When it comes to delivering massive flavors, Runtz F1 Hybrid Automatic certainly doesn't phone it in. Upon taking that first toke, users open themselves up to bold notes of creamy vanilla mixed with candied citrus fruit. The result is mouth-watering. With 25% THC to its name, Runtz F1 Automatic offers an uplifting, euphoric, and creative high that will suit all kinds of scenarios, whether social or solo.

So frosty wow very nice looking plant so far very dark green and smells very sweet

Nov.5 -we placed these girls in a paper towel and paper towel in ziplock Nov.6 - Once girls seeds showed tap root we placed the tap root down into the rockwool Nov.9 - Started DWC, put a small layer of pellets at the bottom then placed in rockwool then covered rockwool with pellets Nov.10 - Took a light away and put it in our small tent, these guys only have the one light now

No feed needed this week, had another temp rise though. Excited to see the project to the end

Both plants have almost stopped growing in heigth now and are in full flowering mode now. Barbarian (=AK-47 x Barbara Bud) Plant #1 is 15 cm shorter than plant #2, but a little bushier. Both have grown very well and are strong and healthy. They get more and more flower clusters now and start to fill up all branches. Trichomes start to appear all over...the plants start to get sticky and develop a weak sweet aroma now. Its time to take off the biggest fan leaves now for defoliation, I took a round of pics before and after.

Mandarin Cookies canopy is looking nice. Wondering if I should flip to flowering soon to avoid light burn when She stretches; Nute burned the Larry OG once again :/ ; defoliation on both mandarin cookies and Larry OG;

I switched the timer on 12/12, i will do not defoliation for 2-3 days and after i will do it, no too massive but i want have as much light i can in the second bloom week. Half week: I modified the layout of grow room, I putted the vertical net behind the tube to earn more space for plants. End week: I did the first of the last 3 defoliation . The plants has a lot of shoots, it hard to arrive to cut the 3 plants on the back, i decided to cut only the leaves and try to have more shoots possible

Esta runtz layer cake outdoor sta esplodendo fiori da tutte le parti

It's been a busy week. The Red Dragon is growing really well, and they seem to be shooting up really quick. There's no stretch on them so I know they're getting enough light. So far the Red Dragon is definitely one of my favorite strains but I've got a lot more to get through yet lol. I have got some acoustic ducting. WARNING... Acoustic ducting has Fibre glass in it and is a MAJOR IRRITATENT to both skin and eyes and should be done in a well ventilated area with suitable protection. So, I have also switched from pure batmix to a 50/50 split with a good compost. I have done this as I'm not 100% happy with the level of water retention in the batmix, I'm finding it to be too much and I do not want to run into any issues. I would rather the soil drys out then I know exactly when to water. I have also increased the HPS to 400w (from 250w) it is very difficult to give plants too much light. I am spraying the tent whenever I can, with warm(ish) water to increase the humidity for a short while. I will be looking into fiming and LST probably next week to make sure they have a good base. I have also had to transplant the plants into another pot as the roots are growing like crazy at the moment. I also purchased a dimmer plug for the fan, as I don't need it to be on full all the time (it's a 6 inch fan with duel speed but thats far too much for what is needed now. Other than that all is good

Plants are are still doing well. MP#4 will be harvested next and the other are not too far behind. I had to remove two large, mid stem nugs from GZ, due to caterpillar damage. Weekly BT & silica foliar along with molasses watering

Привет друзья! И так сегодня 13 день моей малышке. Выглядит здоровой и счастливой За 13 дней ни каких сбоев в росте и развитии, генетика хорошая Всем добра и мира! #Smail_Seeds

14-10-2021: Actually I have to start a next week by tomorrow but I have changed so much today I decided to start a new week today.It is still not easy to maintain a VPD of 0.7..... Well it is only an indication in my case because unfortunately I still do not measure the leaf temperature. Temperature was a bit on the high side last night because the temperature sensor of the PK125 has now ended up under the foliage. Of course it is a lot cooler there so it kept running at 10% I have adjusted that, so tomorrow I expect a completely different temperature trend. Also completely emptied the system today and replaced the Hy-Pro with Ata Awa MAX. I have exchanged the Calmag with the Green Sensation, so this will also be dosed (1 ml/L) from now on. I will add Calmag from now on with a pipette. Let's see how the PH is going, as the packaging of the ATA states that it is self-regulating. If that is the case I will put CALMAG in the reservoir of the PH- and reprogram the system. I have chosen not to scrog today. I drilled a hole in the middle and the container to the right of it and killed quite a few roots (unfortunately the drill went through) and that seems, in combination with other nutrition, a suddenly somewhat lower temperature and the torture between the leaves to to get the sensor in place is enough stress for 1 day to me. So they can now go to sleep and tonight we'll see if there is damage. I'm guessing it's not that bad because previous experiences have told me that they can take quite a bit. 17-10-2021: Flowers are starting to form. 18-10-2021: 2 hours of bondage ;) 139 tie-wraps. Damn.. this is a lot of work on a daily basis 20-10-2021: Finally some white hairs on them.. Damn... never took this long. Will it be because of the high temperature?

its harvest time 💚

It’s been a good week for this girl. I caught the Vid, and have been doing the very minimum to can get away with to keep her going. No training, but I did do a little bit of defoliation. Temp and RH was steady for the large part. I’ll be transplanting her to a 4 gallon pot next week, and again once I clear my tent of the other 3 autos I have going, I will transplant again to her 7 gallon final pot. Happy Gardening 🇨🇦👊😊

ACTUALIZACIONES A DIARIO!! Miles de gracias al equipo de Royal Queen Seeds y a @James por proponerme esta aventura tan trepidante y poder conocer de cerca las nuevas F1 y sobre todo a la gran Titan F1. Espero que lo disfruteis y os sirva como referencia. ¿Qué piensas cuando lees la palabra “Titán”? Hay quienes la asocian con los hijos de Urano de la mitología griega. Otros saben que Titán es la luna más grande de Saturno. ¿Y entre los cultivadores de hierba? Estas personas reconocen a la Titan F1 como una variedad de marihuana con una genética de vanguardia. Se trata de uno de los primeros híbridos F1 autoflorecientes, y es una variedad pionera que ofrece productividad, resistencia y algo completamente nuevo. La Titan F1 deleitará tu olfato durante la fase de floración y más allá. Esta variedad autofloreciente ofrece un potente perfil de terpenos compuesto principalmente por mirceno, farneseno, ocimeno, pineno, bisabolol y limoneno. Gracias a MarsHydro 😊🙏 por darme la mejor luz que hay en el mercado. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos para esta aventura una carpa de 60x60x90, MarsHydro una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. 🌻🚀 Consigue tus semillas aqui: https://www.royalqueenseeds.es/semillas-de-marihuana-hibridas-f1/624-titan-f1.html 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ Quinta semana de floracion, las planta ha terminado de estirar, las ramas laterales han estirando junto con la cola central y se muestran los futuros cogollos, es una planta muy compacta y he tenido que quitar alguna hoja baja para evitar la aparicion de algun hongo. Se muestra el principio de una gran cola principal. Es la genetica que mejor ha respondido, por no decir la mejor. Felicidades Royal Queen Seeds y MarsHydro 😁. Los cogollos han estirado muy rápido y se ha formado una larga cola principal con muchos cogollos en las ramas laterales, comienza a cargarse de resina. 📆 Día 49: Riego con nutrientes EC 1050, comienza el engorde de los cogollos. 📆 Día 50: Riego con nutrientes EC 1050 📆 Día 51: Riego con nutrientes EC 1050, esta llena de resina 📆 Día 52: Riego con nutrientes EC 1050 📆 Día 53: Riego con nutrientes EC 1050 📆 Día 54: Riego con nutrientes EC 1050 📆 Día 55: Riego con nutrientes EC 1050

Rough week, seeing the full effects of nute burn and at the same time cal mag deficiency. Making some newbie mistakes here, didn’t realize how often I needed to give them cal mag so fan leaves started to yellow. Also didn’t realize the importance of watering until runoff with the medium I’m using so there was some build up causing the nute burn. PPM was 4000 when I flushed. I finally think I’ve got it all figured out thanks to friends with much more experience whom I should have reached out to sooner. Oh well, expected to make some mistakes and learn from them my first time around. Still have some big fat frosty colas! Can’t wait to take what I’ve learned into the next grow!

🌫️🌫️🌫️ 🌬️🌫️The end🌫️ 🌫️🌫️🌫️

Stressful grow honestly I have ptsd from my last grow being a complete Hermie den I literally had to check them every single day wondering if the swollen ovule’s were actually seeds lol well anyway I had to harvest at week 6! And this shit still came out ridiculously good smell✔️Taste✔️Bag appeal✔️✔️✔️ Great strain can’t wait to grow it again !

! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - Day 24: attaching once a week APTUS Foliar with Regulator & Nutrispray with the amazing CannaFogger by Petra Grow - Day 28: bud development is super beautiful and praying up Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ Stardawg by MSNL https://www.marijuana-seeds.nl/stardawg-feminized-seeds --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique