Week 1 Day 1 - Clones #1 and #2 are looking alright, not super strong and slight nutrient deficiency issues, but OK. Will just observe for now. - These clones are currently under a very mild CFL light (20 cm away and about 200 ppfd measured roughly by phone app - Tent Buddy.) - Clone #3 still need to be covered to maintain moisture. Yesterday I un-cupped the clone and it wilted a lot. This morning it looks better again after a night of rest under the plastic cup. - I've checked the run off and these clone's pH are so low, while TDS are so high (pH 5.7 and TDS 800pm). This evening, I flushed them with pH 6.5 water and brought the runoff to about pH 6.0 and 350 ppm) Week 1 Day 2 - Just foliage spray with mild CalMag this morning. Soil is still moist, so no watering. Week 1 Day 3 - Just minor watering today. Glad to see the clones are doing well as they are growing a bit everyday. Will transfer them to 3 gallon airpots with new soil mix soon. Week 1 Day 4 - Foliage spray with mild CalMag and Seaweed. Add 5ml of 250 ppm of balanced NPK nutrients AN B52 for each plant. Week 1 Day 5 - Foliage spray with mild CalMag and Seaweed. Transfer them to 3 gallon airpots. Week 1 Day 6 - Foliage spray with mild CalMag and Seaweed. Skip watering. The clones responded OK to the new airpots. Week 1 Day 7 - TBA

02/23/2022 Lots of stretching this week,not much to say so I let the pics and videos talk for them selves🙏🏻 Enjoy Grape Skunk tall and lanky one I'm loving! I will number her for future reference. Biscotti Skunk has some droopy leaves, it's watering day.

Thursday 16th march day 59 Harvested a couple days earlier then planned as my humidity was getting a bit high and worried about risking mold I decided to chop, have to get a good dehumidifier soon, everything looking lovely, nice and dense with very strong fruity potent smell definitely the best looking plants I have grown to date not the biggest buds but they look quality, chopped plants whole gonna do my best to keep the temp and rh% in the dry room as close 60/60 as I can to get a nice slow dry, 🍁😎 I only took the wet weight from 1 plant back left plant was 270g with large fan leaves removed

Gracias al equipo de FastBuds y XpertNutrients sin ellos esto no sería posible 💐🍁 Ztrawberriez: Ganadora de la AAC 2024, con hasta un 25 % de THC, la Ztrawberriez Auto surge del cruce de dos variedades californianas conocidas por sus extraordinarios perfiles de terpenos y su potencia. Esta variedad no solo produce hasta 600 g/m² de hermosos cogollos duros como rocas en 9-10 semanas, sino que también llevará a tus papilas gustativas en un viaje en montaña rusa por toda la gama de terpenos dulces y afrutados 🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/ztrawberriez-auto#description ⛽ XpertNutrients: es una empresa especializada en la producción y comercialización de fertilizantes líquidos 🍶y sustratos🐛, que garantizan los mejores resultados y cosechas de la más alta calidad. A través de una cuidadosa selección de materias primas y un proceso de producción avanzado, sus productos son sinónimo de resultados confiables. 🛒 Consigue aqui tus fertilizantes: https://xpertnutrients.com/es/sobre-nosotros/#:~:text=Xpert%20Nutrients%20es%20una%20empresa,de%20la%20m%C3%A1s%20alta%20calidad. 📆 Semana 2: Esta remesa va algo mejor que la de la semana anterior ya que la temperaturas van siendo algo mas elevadas 🌞🌡️. 🌱 sigue con la luz del sol + 12 horas de luz artificial con el Marshydro TS-3000, el frio y la baja humedad dificulta su crecimiento, en los próximos dias ira a su lugar definitivo en medio de algun lugar donde mostrará todo su potencial 🚀😎.

Just for the pro mix competition, various plants i've harvested with Pro mix soil. Thank you Pro mix for the soil, my plants and I both loved it.

Here is week 3 of Flower, This week is all about the last bit of stretch. On day 21 I will be defoliating and stripping anything that hasn’t reached the net without making too many gaps #RecycledSystem #PeyoteCookies #Cinderella99 #BlueGelato41 #GorillaZkittlez #BarneysFarm #HerbiesSeeds #FreeSeeds #GrowTent #MeizhiLED #Meizhi300 #CustomLED #UkGrown #TheUKGrowsToo #CannabisCommunity 🇬🇧

Week 4 flower now I defoliated her to expose all flowers to the light now i wont tough her let her swell up

Water feed ph 5.8 twice daily 1 cup 1 gallon pot

24/04 - Comienza su segunda semana en etapa de crecimiento. Voy a dejarla tres semanas en vege para despues pasarla a flora. Se encuentra muy bien, crecio rapido en altura. A esta planta no voy a realizarle ningun corte. En estos dias estare publicando mas imagenes de como viene. Podes seguirme en instagram como @bruweed_

As you can see I had some trouble with pests. It is very hard to find this green worms that eat the leafs. A tip I could give you is to search for them early in the morning or when it gets dark, because they eat at those times. Como pueden ver tuve unos problemas con plagas. Las orugas masticadoras siempre han sido un problema por lo difícil que es encontrarlas. Un tip que podría dar es buscarlas por las mañanas o por las noches, ya que comen a esas horas.

About that time !!!!

Chugging on through flowering. 10cm vertical growth this week. Stretch slowing down now.

I should be putting up my scrog net now I guess...maybe next tie down if she allows. Dropping temps to 18 at night is the biggest challenge: it makes her more nice n frosty looking. I still can't select my nute line so no point in shown m off.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Hi Guys the triple is doing well and i think next week orthe next after i will change the light schedule and start the flowering what you think??is that a good choice?? sorry for the bad quality of the pics thx everybody Daniele & Claudia Italians from Greece

Are these autoflowers doing ok my first grow week 4

Started LST on 3/6 of the plants. Having no issues at all so far👌 Gave her some nutes twice so far at a very low dose. Currently feeding once a week. Soil holds enough nutes as is already. Low dose Cal-Mag in every watering - missed week 2 so I just started week 3