Week 8 in the books, cruising to the finish line two more hard watering each and 48 hrs of darkness starting Friday. Genetics: Natty Roots Seed Co Instagram: @green_house_lab

Leaves are looking chunky on this one Top or not to top ? Day 17 Note Watered with plane tap water And finally Top her feel she is going to be a beast Day 21 Notes Repotted into a larger pot

Started with a plain water feed. I’ll do a couple nute feeds before I start the flushing.

Bonjour les amis, Les températures ont enfin baissé. Mais une autre canicule arrive bientôt. J'ai penché cette plante pour que le développement soit plus uniforme. J'ai fixé un petit bambou tout de la hauteur la plante et attaché en plusieurs points. Ensuite j'ai penché la plante un peu plus chaque jour. Elle n'a pas l'air d'avoir souffert. Plusieurs grandes feuilles ont déjà jaunies, je pense que c'est sac de 7 litres est vraiment trop petit, il exige des arrosages très proches. Les fleurs sont déjà bien volumineuses, la plante rentre dans sa dernière phase de floraison. J'ai ajouté environ 2g de trikologic. Voilà pour l'instant, merci pour votre visite, M.

In der 9 Woche ist auch noch alles super denke mal 3 bis 4 Tage dann kann ich sie Köpfen der Geruch ist sehr angenehm von der Green Gelato Automatic RQS 😉.Hab jetzt nur noch Bloom genommen zum gießen

The first week inside i gave her 24h of light.

Wow. They are very crystallized now. Buds are fattening up every day. Lots of orange hairs and milky trichromes. Plan to go to 8 weeks if I can and flush week nine. Will see how they go but so far so good.

🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 👤 29.3 ... 👤 30.3 ... 👤 31.3 ... 👤 1.4 Begin to see a swelling of the flowers, it was time: D begins to feel a slightly sweet scent but we wait a little longer to feel the veterinarian characteristics of this beauty. Viparspectra always works to the maximum, I am enthusiastic about this lamp, I can't wait to mount the XS1000 too. in a week I will soak another seed, I hope to catch the colored one: p 👤 2.4 👤 3.4 👤 4.4 __________________________________________ 👀Are you looking for a good lamp to start?👀 Viparspectra in my opinion has something more than the others, take a look at their site. ➡️ http://bit.ly/pro-seriesproductspro-series-p1500 ⏩Use " GDVIP " for an extra discount💯 ____________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 70% Indica / 30% Sativa 🎄 Genetics ▪️ Sirius Black 🚜Harvest ▪️ 450 g / m² 🌷Flowering ▪️ 63 - 70 days ✨THC ▪️ 25.0% ✅CBD ▪️ 0.5% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2020 ____________________________________________________________________________________ 👀📷 Follow the best photos on instagram 📷👀 https://www.instagram.com/dreamit420/ 🔻Leave a comment with your opinions if you pass by here🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

the girl is growing very fast :) that's why I decided to remove her wedding leaves, but weak branches, after a week I will let her start blooming on 12/12 :) in some photos you can see such a smile 👨‍🌾, for me it means watering day :D:D.

Welcome to week 7 of my White Truffle grow! I switched to flowering 5 days ago, 12/12 light cycle. No signs of pistils yet, shes growing nicely, but no crazy stretching. Since this is my first time growing photos, I'm really excited to see how the week goes :) I need to defoliate a lot, because the humidity is a little too high after watering the plant

They had their flush almost 2 weeks ago, they smell so f-)king awesome!!! They also fattened up, I'm surprised but I'm also really curious about the yield. One of the plants made no purple color at all, but I think that one is the most fat and sticky lady😎​ I'll be back soon with a harvest update, thanks for reading 💚​

I’ve spent the last six days recalibrating my grow room. It feels more like a lab now because I am doing a lot of experiments with different variables and this week I have learned an awful lot. After pushing the environment to its absolute breaking point, I had to balance what my eyes were seeing against raw data to identify exactly where the Traffic Jam was occurring. I got so excited at the ability to control proteins in a plant with light spectrum I did the usual thing I do I drove them to their limits. Maximum photons (and beyond) in an environment where the plant just works like a suction funnel with a VPD of 1.6 kPa. What I forgot is that in my organic setup, the bottleneck is the speed the microbial life can create immobile nutrients. Under any normal conditions, the Biotabs 'just add water' method is more than capable of keeping up, but I had to be that guy and push them with 950 µmol of whites. By the time my Emerson burst came on, I was hitting them with around 1150 µmol, not counting the drain from the UV-B! This, on ambient, is just too much to ask; the plants used up all the calcium available, and my microbial life was unable to keep up. This is good to know, as if I wish to grow at this rate later, I will know what I need to add to facilitate that. I'm still blown away by spectral steering and the way proteins in a plant cell work. Grows are not normally still this fun at this stage. ________________________________________ 1. The "950 µmol" Mistake & Conclusion • The Error: I was running the main rig at 950 µmol, but with 4 strips of DRFR engaged, I was hitting a total ePAR of 1150 µmol. • The Failure: This intensity, paired with an aggressive 1.6 kPa VPD, outran the plant's metabolic capacity under ambient conditions. • The Result: 'Pistil Frizzle' on the crown of the Triple Cheese—the delicate stigmas literally toasted under the radiant load. 2. The Calcium Benchmark & The "Traffic Jam" • The Action: I noticed rusty, necrotic spots scattered across the leaf surfaces. • The Conclusion: The plants weren't 'low' on Calcium; the Biotabs microbial factory couldn't mine it fast enough to keep up with the 1150 µmol demand. I have officially flagged an image as my 'Calcium Benchmark' to track this in future runs. 3. The attempt to fix • The Adjustment: I have lowered the light ceiling to 800 µmol (targeting a DLI of 31–36) and stabilized VPD between 1.2 and 1.3 kPa. • The Rationale: This matches the 'spending' of the plant to the 'income' of my organic microbes, allowing the nutrient highway to move smoothly without crashing at the leaf tips. 4. Emergency Recovery: Bactrex & Bio PK • The Action: To clear the jam, I introduced a targeted top-feed of Bactrex and Bio PK to the Cheese. • The Goal: Boosting the microbial workforce and providing a direct PK source to support the Week 5 bulk while the Calcium delivery recovers. 5. Rhizosphere & Water Management • New decontamination for my 10L res refills: 10 drops of ExoThrive Neutralise, 5 minutes of violent blending, and an 8-hour air stone session • The Goal: To strip all residual chlorine and chloramines from my London tap water to protect my Bactrex and Mycotrex factory workers. • Future Intent: Researching the Water2 Pod 2.0 with a Fluoride filter to automate this and ensure consistent, medical-grade hydration. 6. Pot Size & Substrate Logic • The Constraint: Bigger pots are not happening • The Solution: To compensate for the smaller volume, I will increase Bactrex frequency and explore high concentrations of Gypsum (20g per 10L) in future mixes to increase mineral density without changing the footprint. Summary: I pushed for maximum push and hit a wall. By respecting the biological limits of a just add water system, I’m moving toward Environmental Harmony where every photon is used rather than wasted as a stressor. Been a great week for learning. Thanks for passing. Grow well ..

She is going to be huuuuuge! All branches and stems have risen up and are strengthening daily in order to produce big resin filled flowers! I love her progress as she climbed to the height of the purple punch and soon to stand taller! Can’t wait to have the final weeks approach! Thanks for stopping by buds and chuds 🤩😎💪🏽

Starting to get a nice sweet strong smell buds are coming along nicely 😍 really can’t wait till these beauty’s are done

Week 3: TrolMaster Chronicles – Transplanting, Growing Strong, and Thriving in PRO-MIX HP 🌱✨ Hey Grow Fam! Another exciting week has flown by in the grow room, and I’m thrilled with the progress! We kicked off Week 3 with our first set of transplants. The Gorilla Melon was transplanted at the end of the week, while the Papaya Zoap is still patiently waiting for its turn to shine. Each plant that’s been transplanted is now comfortably settled in 15-liter Autopots, filled with PRO-MIX HP BIOFUNGICIDE + MYCORRHIZAE, and wow, I’m loving this mix! 🌱 Why PRO-MIX HP is a Game-Changer For those of you unfamiliar with PRO-MIX HP, let’s take a closer look. This soil provides superior drainage and aeration, thanks to its high porosity. The addition of fibrous peat moss and coarse perlite creates an ideal environment for water flexibility. It’s been perfect for the girls as they transition into their final homes. Plus, the biofungicide and mycorrhizae are doing wonders for root development, giving them all the support they need for vigorous growth. The plants are showing off a beautiful, vibrant green, each with its own unique characteristics—no two plants are the same, and I love that! 🌡️ Environment Update: Temps, RH, and More Let’s talk about the conditions the girls are thriving in! We’re sitting at: • Temperature: 26.7°C • Relative Humidity: 62.9% • VPD: 1.30 (I know it’s a bit high, but they’re handling it like champs) • CO2: 800 ppm • pH: 6.18 • TDS: 215 ppm • Solution Temperature: 23.2°C To make things even more efficient, I’ve adjusted the light height, keeping the PPFD around 360 to 400 to save on energy. These beauties are still soaking in the light perfectly, and I couldn’t be happier with how they’re responding. 💧 Watering and Feeding At this stage, the plants are thriving with just enough nutrients to keep them happy. I’ve kept things simple with a balanced solution, ensuring everything stays within the perfect range. The PRO-MIX HP, with its mycorrhizal fungi, is really helping with nutrient uptake and boosting overall health. It’s amazing to see how quickly they’ve adapted! 🌟 Transplants Complete – Progress Feels Incredible! I’m super excited with how everything is shaping up! Most of the transplants went smoothly, and the growth we’re seeing is just amazing. The Papaya Zoap is still waiting for its final move, but it’s growing strong, getting ready for the next step. It’s an honor to work with these genetics—they’re each unique, yet all thriving in their own way. 🌱💚 🌍 Shoutouts and What’s Coming Next I couldn’t do this without the support of my amazing sponsors and all of you, Grow Fam! A huge shoutout to TrolMaster and Aptus Holland for their top-notch gear and nutrients, and of course, to all my followers—whether you’ve been here from the start or are new to the journey, thank you for the love and support! 💚🙏 Don’t forget to check out my Instagram and YouTube, where the Seed to Harvest Series just kicked off! I’m going deep into all the gear, techniques, and day-to-day grow updates you see here. Exclusive content and more are waiting for you on those platforms, so come by and join the fun! Growers Love to everyone, and here’s to another epic week of growth! 💚🌱 Let’s keep pushing the limits and making magic happen. • Nutrition: @aptusholland @aptus_world @aptus_es @aptusbrasil @aptus_thailand @aptus_portugal @aptususa_official @aptusplanttechnz @aptusplanttechaus • Controls: @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro • Soil: @promix_growers_eur @promix_cannabis @promixmitch P.S. Let’s talk about these new Model One LED bars I’m running. 🌿💡 They’re not just any lights—these are full-spectrum beasts designed to give my plants exactly what they need at every stage of growth. The real magic, though? The dimming feature. With just a quick adjustment, I can dial down the intensity without sacrificing the quality of the light. This means I’m saving on energy costs while still delivering top-tier PAR and maintaining a balanced spectrum. It’s not just about blasting plants with light; it’s about giving them the right light at the right time. By fine-tuning the PPFD (Photosynthetic Photon Flux Density), I’m hitting that sweet spot where the plants thrive, and I don’t have to run the LEDs at full power. So, while I save a bit on electricity, my plants still get the perfect environment to reach their full potential. 🌱✨ This level of control lets me optimize the growth, and trust me, my plants are loving it—just another reason I’m thrilled with the Model One setup. 💚💚💚 Growers Love everyone 💚💚💚

Was this girls first week in flower! I don't want her growing out of this tent space so I flipped her early. In the meantime, I've been low stress training her outwards to fill up the tent. My ties are holding her down and will continue for another week. Hopefully everything will be level for next week!! Lights at 100% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

Stinky omg so fruity and delicious 😋 i cant wait for this beautiful sob to be done!! Ended up stressinf medusa #2 a little bit and got 2 more weeks of veg time!! Dont always believe what you read or hear kids!!!😂 shes finally bouncing back and buds are fattening up nicely

These girls are taking off like a 🚀.Day 21 I’ve noticed all really healthy strong plants with min stretch as I now have the SE7000 set at 50 percent.So I did some LST and I expect to see some really good growth this week 🔥