Likes
Comments
Share
@Ageddd
Follow
This week it has been raining a lot, the plants were under a ceiling the most part of the day, but they enjoyed a couple of sunny days too. The new seeds arrived just in time :) ULH1: Still growing but at the end of the week is stacking more hairs so its changing to full flowering. Watering every morning aprox 1l. Feeding of the week: 2 irrigations with nutes, Top Veg 3ml/l + 1ml/l Green Explosion, but the second with 2ml+1ml because the plant was dark green, and i dont want to burn tipsher at this stage ... The day of the photos i started to feed her with halg Veg Nutes (1ml/l)/ Flower nutes (1,5ml/l) ULH2: Watering every morning aprox 0,5l. The little girl is branching a lot, and its growing really tall and strong, more internodal space than her sister, and the smell is more citrous.
Likes
42
Share
@rhodes68
Follow
Typical Green Crack harvest, lot of leaves but easy otherwise Lack of tent space really hurt her yield, guessing 25% less due to it Dry weight for Plenty 322 grams nice easy final trim rock hard nugs Two clones follow The clones nearly identical both weigh in at 710 grams wet in dry yield later Clones yielded 287 grams dry
Likes
Comments
Share
dear grow community, I report back with the fifth week of my royal gorilla auto grow. This week my plants have started to flower. They have grown extremely well and I have a lot of fun taking care of them. I have now stopped using LST as I want the plants to grow upwards. I have also changed my fertilizer. I also changed my sodium vapor lamp from veg to flower. I'm looking forward to see my babies flower and hopefully produce big buds. I am mostly satisfied with the strain, but one plant has began to flower realy early as you can see in the picture. best wishes absolutgrow
Likes
68
Share
@Zengrower
Follow
Now that the plants are in full bloom the scent is getting stronger by the day. I'm already picking up strong fruity aromas, filling the room each time I open the G-Tools. It's nice to see how the different pheno's develop. Trichome Queen is definitely a hash plant. The resin is growing everywhere, also on the bigger fanleafs. She will be an excellent candidate for a nice rosin extract. The other two just focus on growing buds and looking awesome at the moment. I'm easing up on the nutrient this week as I detected some brown spots on the top leafs. Might be nutrient related but it could also be due to the distance of the lamp. It's raised to the top of the growbox but still too close to the canopy in my opinion. Maybe I should have done some more LST, or maybe I need to get less greedy and not try to cram three plants in a small growbox 😅. Let's see what happens in the coming week. Stay tuned for more pics and updates as the week progresses!
Likes
33
Share
when flushing i accidentally ripped a little bud of one side stem. i kept and dried it about 4 days... it smells like cookies and already has some strong medical effects. i am pretty surprised, how well this one turned out. now i can't wait to try the clean, flushed, cured flowers 💚
Likes
12
Share
@Haoss
Follow
I have to dry the buds in the dark, at 20 degrees in 50% humidity
Likes
11
Share
Hi there! In the next grow ill use the lollipop technique for sure because there is a lot of mini buds at the botton on the plant that arent getting enough light to get fat. There is some serius signals of overfeeding, but ill try to adjust it in this week.👻
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
129
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Since the flush, the leaves with lot of yellow, keep turning yellow and have been removed, but the other leaves look under control. Buds keep growing and pistils are more and more orange/brown, Trichromes not yet milky (video) Harvest maybe in 2 or 3 weeks. 💧 Give water each 2/3 days. 1,5l Water 1,5l Water + Easy Plus + Sugar Royal PH @6 - Easy plus tabs 1 tabs/6l water 💡Mars Hydro - SP 3000 100% 44 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light Zamnesia - Frosted Guava Auto🌲🌲 Discount code -20% with GROWITGD code 🔥🔥 https://www.zamnesia.com/7679-zamnesia-seeds-frosted-guava-automatic.html
Likes
23
Share
Excited and impatient, starting to come on really well now, everything is going ok as it has been all the way through other than a little struggle with keeping the heat down in the grow tent during the first few weeks in veg, bigger tent and all is ok now, small signs of nutrient burn of a feed this week but don't think anything to be worried about from other diaries i have seen. What do you think its going like so far? Any comments with feedback on how its looking or tips for me coming into my final weeks appreciated thanks,, Plant A is at 121cm tall Plant B is at 143cm tall
Likes
12
Share
This lady is a true Beaty! Full bush plant that is always praying to the light and easy to keep happy. This is my front runner and she was flipped yesterday! They have 60 days to finish!!! ✌️🏻💚
Likes
2
Share
Processing
Likes
15
Share
@Dico29
Follow
It’s now showing pistils pretty well, and I got some critical peyote from Barney farms In a napkin right now There is a little burnt tip on fan leaves I think too much nitrogen since it’s in the big pot and the leaves are dark green. But looks good happy I picked the internodes during preflower too
Processing
Likes
3
Share
@mr_smooke
Follow
Here we are on day 28. On day 23 i spoted Spider Mites. Next day i been spray leavs whit neem oil, for now SM are gone i hope they will not come back. Been spoteted on some leavs some def. I think that is mg, ca. She coming along nicely😁🤩🤘✌️
Likes
38
Share
For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.
Likes
97
Share
@Roberts
Follow
The time has come for cbd crack 1:1. Going into darkness tomorrow, will update harvest video in a few days. It has fox tailed pretty badly, but that is ok. Thanks again fast buds🌱 Update- harvested and video uploaded Time to dry. Thank you grow diaries community for the follows, likes, plus the subscriptions on my YouTube channel. I greatly appreciate the support. Happy growing 🌱🌱🌱 If anyone needs to purchase fastbuds here is a link for my affiliate program, thanks 🌱 https://myfastbuds.com/?a_aid=60910eaff2419
Likes
13
Share
@Canadian
Follow
The plants seem to be growing very fast very strong. thank you for reading I will continue to update have a happy grow
Likes
16
Share
@Hawkbo
Follow
These were taken on day 59 I was a little late to put gettin them up. I've been doing some heavy flushes on some of them cuz the run off ppm was a little high. I mixed these with soil so I dont know if that's why it's not coming down as quick as usual but I'll keep poundin these ladies til the finish line
Processing
Likes
28
Share
This week we had to go on a destination wedding and had to have friends house sit. Again 😔 I hate having to do that, but this time everything went very smoothly. We didnt lose any plants lol. Before we left I was able to get #2 transplanted in a 7x7 nursery pot. Man was she ready too! I've decided since I am only growing 2 Choc Mknt OGs that i will be training one(both high and low stress) and this plant(#2) I will be leaving completely alone to do her own thing 🤞 Watering has went smoothly this week. Both plants only wanting water once in this 7 day stretch. I think because the transplant soil was already very moist. #1 has rooted and already started taking off from her transplant last week. Tent update: Our ES300 by the green sunshine company arrived this week!!! I was able to get it I'll installed before leaving. So now in my Vivosun 2x4 tent I have 1 es300. I moved the viparspectra to my large flower tent. The Choc mint seem to absolutely love this light. I started it at 70% power(its a dimmable light fixture) and am slowly moving it up over the course of a week. Day 12: my friend reported great growth on #2!! So she is rooted as well and doing good. Also, the heat in my 2x4 is in the low 80° getting up to 85° even 90°(for a few minutes) I'm mostly running Sativas which love the heat, but I have noticed Choc Mint OG prefers it a little cooler. Her top leaves are canoeing and curling a bit. Thanks for checking out my diary! Sorry this week was lacking a bit 🤷‍♂️ now that I'm home they're only gonna get better!