Very fast growth using Pro-MIX ORGANIC SOIL. IN WEEK 1 solo. Transplanted last night with great white and a light watering to a nice happy lady today. Great week 2 start!

Day 30: Girls are stretching and starting flower😇 pots are getting dry quick so maybe ill have to up water to 1.2l once a day or even out through out the day🤔 Day 31: Gave about 1.3L feeding to all girls! made sure to hydrate coco all the way and gave some water to watertray so they can suck it up if they are still hungry! i cheked ppm on my water but didnt check runoff yet. ppm was 900 with 0.5 convert. ph around 6. will add pics later or tmrw😎 Day 32: gave girls little lighter feeding, around 3ml/L GH nutes b clmag. I was too lazy to take proper pics with better light so took a vid instead😁 Day 33: i was thinking of pinning the tallest cola to scrog but decided against it. Mainly because these girls are doing very well, and my only consern is light burn. I cant get my light as high as i want to, cos my tent is only 180cm and got filter above my light. I think ill need yo setup next grow so my filter is outside of the tent🤔 thx for all commentors on my growquestion/diary! Made my day to hear my babies are doing well without any bigger problems😁💚 Edit: did some LST on bigger colas to avoid lightburn since these girls are strecthing almost 5cm a day😁 hopefully they will keep the same energy on developing buds😉 I checked ppm and pH from runoff; #1 ppm 750 ph 6.6 #2 ppm 750 ph 6.5 #3 ph 6.4 ppm 750 (all ppm converts were made on 0.5 rate) Gonna give low ph watering next day Day 34: Good morning growers😎 this morning i gave my girls quite an heavy feed, 6ml calmag, micro, bloom and 3 ml gro into 5 or so litres. pH around 5.7 and ppm 1100 with 0.5. Pics are coming later afternoon with some runoff numbers😎 stay lifted💚

So my phone died and I had to get it replaced. But here we are right before and after topping the plant for the first time to start the two mainline branches.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Some big autos! Starting to get fat now as they pack on the weight. Starting to use powdered Koolbloom half way through the week here. 1/4 teaspoon. They are getting frosty and they are beautiful. Will add new pics tonight, these are from start of the week on Saturday.

There is a timelapse of this past week! This plant, the blueberry, is in the background. Early this week I transplanted the rock wool cube into my DWC system. I pH'd the water, but otherwise did not provide nutes for a few days. The grow tent is now on an 18hr light period. Sometime in the middle of this past week, this blueberry started wilting! In response, I provided the nutrients listed above, with the addition of 1 gallon of (hard) tap water to provide calcium. Unlike my GSC, the nutrients did not fix the wilting, but the wilting did go away after 2-3 days. I had some humidity troubles, so I resorted to flooding the bottom of my tent. This does seem to help maintain humidity around 50% RH. This plant is growing asymmetrically! It's first set of "real leaves" is not even. It will be interesting to see how this pans out.

Kept defoliating and spraying the plants with Cannacure every 3-4 days. I'll be on holiday tomorrow so my roommate will take care of the plants for 2.5 weeks. How much longer would you guys say until harvest? I'm not so sure, could be 10 days or 3 weeks if you ask me...

Que hay familia ya traigo la décima semana de floración de estas Lava Cake de Zamnesia. Vaya color que se marcan todavía, están bastante sanas , los tricomas están pegajosos , tiene unos aromas espectaculares, me tiene enamorado. Ya estamos en la recta final , se están poniendo a punto de caramelo. Temperaturas máximas en 27 y mínimas en 25y una humedad estable en torno al 36%. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que lo disfrutéis, buenos humos 💨💨.

⛺️ MARSHYDRO 💡VIPARSPECTRA 🍼GREENHOUSE FEEDING BIO GROW 🌱 WEEDSEEDEXPRESS

Siamo giunti alla 2° settimana di fioritura 🤩 Sto iniziando a notare l'allungamento delle piccole.. per ora ha solo dei piccoli pistilli, ma credo che a breve esploderanno🤤🤤

i think pistills are changing more oranger this week.. but i guess buds are not growing fat this week .. something isn't right...

Harvested her with 20 % amber trichomes.

Number two and number three look the same so far one just kind of taller than the other. I also had a bit of a overwatering issue that seems to be fixed but overall she’s pretty.

Ztrawberriez auto is growing great. She is starting to stack and has been very hungry. She has a great layer of frost started. Everything is looking really good at the moment. Thank you Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

Look what I did to my girl, poor lady. But i'm sure she will bounce back, but with all that leaf shit It's hard to properly tie them down. So i broke off a total of 2 branches (yellow tape) and managed to attach one back to it. Otherwise she took all the stress LIKE A CHAMP - yet. We'll see. To be honest, i was quite lazy with her the last days, it was pretty stressful but look at her, she is basically growing herself! As long as you can cool it, have some sort of system to change water and some, basic nutrients and ph- DWC is the easiest system for me, 100% Look at the roots and i did not fill up the reservoir for like half a week, so a lot of it wsd exposed to air for a longer time still she is growing and growing. Two more weeks and i might have a problem with her in flower, because she will drink so much water the reservoir won't hold a long time haha. Almost forget, i need to add either more fertilizer /ml or give extra calmag. will probably do both kekw Cheers guys! (whoever reads this, this is your sign, get high 👌)

only thing to say is that i need to water more often, otherwise all is fine