Final Report: Grow: The plants has grown very beautiful and healty without pests and diseases. They grown bushy and with medium height during all the life cycle. I had try to use LST in third veg week but i did't made correctly and after that i dicided to return to grown normally without any particolar tecnique. I used a littel more fertilizer then mine usual and that made the plants grown fast with only a littel bit of leaf margin burn which I solved by decreasing the quantity. In the first two weeks of flowering stage the plants started grow not to very tall (except for one) and the number of the branches increase, in this phase i only defoliated when the fan leaves turn yellow in late stage. During all flowering stage the flowers grown but they remained very soft, they turned dense and bigger in the last weeks and this time i waited until almost all of them were mature before harvest the plants(I waited a littel more respect OG Kush CBD). I changed the taller plant from one grow room to another(in the sixth week) when she became too high and she couldn't stay more in the smaller grow box(nothing changed in the enviroment between the two boxes). Equipment and grow box: The enviorment of grow box has been optimized every stage with the right temperature, umidity and air flow. Vegetative temp/umidity --> 23-29 °C/45-55% Flowering temp/umidity --> 20-26 °C/40-50% The air flow was created by two pc fans and one big fan. Harvest: This time the plants were full of dense buds but the lower branches had many fluffy flowers(i used them to make some hash) but the result not change too much . The result of this grow is amezing compared to my old expiriences. I harvested the flower and i made a fast curing process after i washed the crop and i let them to dry with a fan on it. After five days a take the branches which were to dry and i did the final trimmig before put all the harvest in a open jar for finishing to dry. I collected all the leaves, fluffy buds and trimming scraps in a bag and i let them dry. I harvested the taller plant before the other two because she had matured earlier(with the OG Kush ladies). Later i put the bag in the freezer and when i collect and dried all the scraps from OG Kush and Dandoverde Haze i did some Ice-O-Lator hash. I used 250g of trimming stuff and i made 11.50 g of hash, I had use a set of 5 bag and i take the resin from the 160µ - 120µ - 73µ- 25µ bags. I pressed all the resin in a great block of tasty strong hash. Always better every time 😊💪 Total harvest ---> 126g only of dense buds and 11.50g of hash.

So now she is really starting to showing her nice buds. As you can see she stretched out more and thats good because I have a feeling that they are gonna bo some nice full colas. I start adding Alga Bloom with 2 ml and by the next watering I upped the volume to 3 ml. Next week I will go up to 4 ml of Alga Bloom with 1 ml of Green Sensation. She is really looking strong like bodybuilder. Branches are tough and hard. Her roots are hea;ty and stron too. I saw a little piece of root sticking out of hte hole at the bottom of the pot. The roots are so strong that I can hold the main stem and lift it with the pot and all.😀 Till next week!

FBT 2308 is growing great in the Agrogardens nutrition, under the Medic Grow Mini Sun-2. She has gotten her roots pruned, and selective defoliation plus lst. Everything is looking really good for it at the moment. Thank you Medic Grow. Agrogardens, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

What a difference a week makes! #1 is just adding on the weight this week while #2 continued to stretch to what might be a record for this auto at 40” and is now exploding with pistils. #3 is yet another type of pheno and a short bush that I have continually taken leaves from trying to figure out what is what. I expect #3 to start her stretch this week given the fact that she’s almost two weeks behind the others while I was trying to find a bean that would pop. Staggering on the trim doesn’t really bother me because they are all getting the same 19 hours of light indefinitely. We are getting into some heat up north and I imagine the room will climb into the high 80’s but there’s not very much I can do about that except giving them air circulation. Stardawg really is the star of the show and might end up being my consistent go to if they keep going like this.

Human Body 65% Oxygen (in all liquids and tissues, bones, and proteins) 18% Carbon (everywhere) 10% Hydrogen (in all liquids and tissues, bones, proteins 3% Nitrogen (in all liquids and tissues, proteins 1,5% Calcium (lungs, kidney, liver, thyroid, brain, muscles, heart, bones) 1% Phosphorus (urine, bones, DNA) 0,35% Potassium (enzymes) 0,25% Sulphur (proteins) 0,15% Sodium (in all liquids and tissues) (in terms of salt) 0,05% Magnesium (lungs, kidney, liver, thyroid, brain, muscles, heart) The average adult male contains about 140 g of K(Potassium); the level varies with body weight and muscle mass. We ingest about 2.5 g per day of K from our food and excrete about the same amount. 0.0118 % of that is K40 The answer is that they were present when our earth was formed. Any radioactive material originally present at the formation of the earth would have decayed and disappeared if its half-life was short compared to the age of the earth. However, if its half-life were long, close to or greater than the age of the earth, then such materials would not have disappeared but are still with us today. There are several radioelements in this category, such as the well-known elements uranium and thorium. Thorium (Th232) has a half-life of 14,000,000,000 years, uranium has two long-lived radioisotopes; U238 has a half-life of 4,500,000,000 years, and U235 has a half-life of 710,000,000 years. These give rise to the radium and thorium atoms found in all humans, acquired from the food we eat. That food, of course, obtained these materials from the soil in which it grew or on which it grazed. Potassium is also in this category. There are actually three potassium isotopes: K39, a stable isotope, is the most abundant, at 93.26 % of the total; K41 is next in abundance at 6.73 % and is also a stable isotope. The potassium isotope of interest is a radioactive isotope, K40. It is present in all potassium at a very low concentration, 0.0118 %. It has a very long half-life, 1,260,000,000 years. When it decays 89 % of the events give rise to the emission of a beta ray with maximum energy of 1.33 MeV. The other 11 % of the decays produce a gamma-ray with an energy of 1.46 MeV The forces required to forge thorium 232 can only be harnessed when traveling close to or at the speed of light, so essentially what I'm getting at is 0.0118% of every person alive is formed of the same element that was forged in the anvil of creation itself. We are all one & the same German chemist Johann Wolfgang Dobereiner attempted to classify elements with similar properties into groups of three elements each. These groups were called ‘triads’. Dobereiner suggested that in these triads, the atomic mass of the element in the middle would be more or less equal to the mean of the atomic masses of the other two elements in the triad. An example of such a triad would be one containing lithium, sodium, and potassium. The atomic mass of lithium 6.94 and that of potassium is 39.10. The element in the middle of this triad, sodium, has an atomic mass of 22.99 which is more or less equal to the mean of the atomic masses of lithium and potassium (which is 23.02). 9 controls the 6 and 3. The Limitations of Dobereiner’s Triads are : All the elements known at that time couldn’t be classified into triads. Only four triads were mentioned – (Li,Na,K ), (Ca,Sr,Ba) , (Cl,Br,I) , (S,Se,Te). 2. Newland’s Octaves English scientist John Newlands arranged the 56 known elements in increasing order of atomic mass in the year 1866. He observed a trend wherein every eighth element exhibited properties similar to the first. Azomite contains 180ppm of thorium. Your plant will thank you, you are welcome. Most farmers do have not a proper understanding of what is Azomite and how to use it in gardening, especially if they practice organic farming. Continuous propagation and leaching effects of water deplete the essential minerals and micro-nutrients from the soils. Such soils remain weak, not able to support the production of fruits and vegetables. Azomite mineral contains micronutrients that supplement the soil. It also balances the minerals for growth and overall productivity. Constant use of this mineral rejuvenates your soil renewing its potency again. Azomite is a naturally mined mineral product that is ready to use. It’s a unique rock that comes from a mine in central Utah. Azomite requires no mixing or special preparation before use. It is derived from volcano ash that spewed out millions of years ago. It contains the widest range of minerals of all the rock dust in the world. Azomite provides plants with 70% essential elements. These elements include magnesium, calcium, potassium, and silicon for plant growth. Facts About Azomite Fertilizer It’s a natural mineral – 100% natural with no fillers or additives Does not contain any harmful elements Requires no special preparation before use It’s odorless – very friendly to use Does not restrict water penetration or aeration Is easily broken down and absorbed into the soil Does not burn plants.

My Runtz plant is finally taking off! It took a little while to get going, but it's growing really well now. The leaves are a dark, rich green and have a really unique, wild shape to them – long, pointy, and unlike anything else in the garden. Okay, This past week has been absolutely fantastic! The weather has been incredible, and I've been able to keep the windows open almost the entire time. My plants are thriving in the humidity, and the VPD has been perfect. Everything just feels so balanced and in check.

She lookes like need only 2 more weeks i had plan to chop it on the 13 Dec. Maybe this is her last feed before flusing.

Been flowering very well. I backed off nutrition a little. Minor nute burn on tips. Beside that it took to lst training great. Flowers are looking dense and potent. Will see in a few more week. Thanks again for likes and follows. Support means a lot. Happy growing

Essa semana elas continuam crescendo bem e eu cortei a alimentação. estão tomando muita agua tambem.

WEEK 8 Finally calibrated my ph meter and get everything sorted. Ph is now 5.5 but it should slowly building up to 6.0 I lightened the feeding because of some signs of overfeeding but nothing too dramatic. Very strong citrusy smell. One of the plants is incredibly frosty for it's age and all buds look pretty dense so I can't wait what is gonna happen over next few weeks. Giving them pretty much max recommended dose of CANNA BOOST so I hope it's gonna give me some good results in terms of taste and smell. :) Oh and I finally got new 600W bulb

Today marks the beginning of the last week of flowering for my cannabis plant. After months of care and patience, I can finally see the first amber trichomes starting to form. It's a sign that the plant is nearing the perfect time for harvest. The buds are dense and frosty, and the shift in trichome color is telling me that the plant is at its peak potency. In a couple of days, I'll move the plant out of the tent and into complete darkness for 48 hours. This process is supposed to help boost resin production and make the final buds even better. After that, it’ll be time to cut her down. It's exciting to be so close to the end, and I can't wait to see how the final product turns out!🌱🌱

Blackberry Gum Auto looks real hungry signs of deficiency... Bio Pk 5-8 dosage upped to 15ml in 1 liter per week for everyone Buds starting to gain some weight

Day27 video

Due to busy days, both at work and in my personal life I havent been updating growdiaries very good recently. I will be picking up soon... I just wanted to show that the GG pulled through fine ,even with me lacking in her nurishment... She has grown on some huge buds , I've harvested her today and cut her up, she's laying to dry atm, It'll try swing by with an update once she's dried

My Strawberry Gorilla Automatic from Fast Buds is now in its third week of flowering, and I couldn’t be happier with how she’s progressing. She looks incredibly healthy, with vibrant green leaves and strong branches. The stretch phase is nearly over, and she has developed a solid structure with a well-defined main cola.🌱 One of the most exciting changes this week is the first appearance of trichomes on the main bud. Under the light, they’re starting to sparkle, hinting at the resin production that’s about to take off. The buds are forming nicely, and I can already smell a faint but promising aroma developing. So far, she’s responding well to the nutrients and environment, with no signs of deficiencies or stress. If she keeps going at this pace, she’s going to be a real beast by harvest time.😊

My GG is safe to say that she is frankensteins bride...this past week has been the most stressful for both of us...from breaking the second main that grew from the first topping resulting in me topping it again, to thinking i was getting early stages of WPM so i milk solutioned both plants, pots, the tent..to realizing that the TG def had a copper deficiency which i solved with a flush with nutes and grow big foliar spray and is now showing great healthy growth...def a learning experience...dont let anyone tell u its easy haha...and if ur finicky and have adhd, just let the plant be, hardest part yet 🤦‍♂️ also did a pretty heavy defol and screen comes up within a week.

great strain, heavy yielder and very nice smoke, definitly would grow again!

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Let's go for the flowering, stretch Started, hope can stay under control, we can start to see the first pistils, Plant look happy. Weather start to be really cold, and worst next weeks, we'll see how turning. 💪 Keep Working on the canope, removing leaves and under buds site. 🕑 Now 12/1 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 43 cm. Mars Hydro Fan kit Setting 5 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/