Привет друзья. Моей растихе сегодня 28 дней. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 применяю технику LST каждые 3,4 дня На сегодняшний день влажность 63% Растение растёт хорошо. генетика радует. Всем мира и добра! #Smail_Seeds

2/3 plants started showing signs of too much light. Dialed light back and symptoms of yellowing tips have slowed. All have been defoliated as needed.

Colas have increased in size, still looking to develop more mass, trichome production does not seem as abundant as some grows i have done but this strain has only an 8% THC content and a higher CBD ratio. Increased nutes strength by .25 pml to .75 pml. Pistols are still standing upright so no sign of them being ready for harvest, will be studying the trichomes for any amber changes in the next week of flower. The fragrance is getting much stronger and is very fruity and pleasant, unlike most ganja aromas that can be strong and dank, this grow has a very uplifting fresh Bubblelicious scent.

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.

F1 Did some topping this last week. In a couple of days will turn them to flowering, would like to keep it between 3-4 weeks of veg at most with the Autopits or they grow way too big. Next week will be putting more nutes on the reservoir, by now that are drinking quite slowly but already using the Autopots

Day 36 : I did LST again plants are growing quick. I set the lamp approx 26 cm away. 600 W LED, 20 hours on 4 hours off the same with ventilation humidity approx 60 percent. Ferlizitaion will continue the same way Monday Wednesday and Friday BioBizz family and Tuesday Thursday and Saturday bat gunao and Epson salt. Water intake 100 ml per day per plant. Day 39: Pre-flowers are coming BlackBerry Kush is getting purple ❤️. All of them started flowering and colas are coming out. Day 41: All of them have pre-flowers and pistils are out. BlackBerry Kush started turning into Purple. She and LSD-25 are the most developed. I did more LST on them.

08.06.26 die Pflanzen entwickeln sich weiterhin gut und hatten die vergangene Woche mehr Wind abbekommen, jedoch ohne Schaden. So darf es gerne weiterlaufen!

Cut début de moisissure mais elle etait prête et quelle odeur de dingue presser de faire le smoketest

Steady progress this week. Her trichomes have put in an appearance this week! 😎 Still got a way to go yet.

During the week she was transplanted into her final 30L pot after the roots started spiraling at the bottom of the 0.5L container. The substrate (80% Light-Mix soil & 20% perlite) was prepared following BioTabs guidelines. To fine-tune the mix, I added 1 g/L of Dolomite Lime to help stabilize pH and provide Calcium and Magnesium, plus 1 g/L of Primary Rock Dust / Basalt Dust (still need to grab some BioTabs Silicium Flash!). For watering, I'm using a 50/50 mix of tap water and RO water (Tap specs: pH 8.5, Ca: 51 mg/L, Mg: 9 mg/L). Given the size of the new pot, I’ll be taking extra care to water lightly and sparingly for now. The transplant went smoothly without a hitch. Now I’m letting her settle in and recover before we dive into some High-Stress Training (HST). Overall, she’s looking super healthy and growing nicely! Weekly Stats: LED Power: 35 W Target RH: 75% Watering Volume: 1 L (total for the week)

3-26 Day 69 Game time 1.2 grams. Green Sensation 1.5ml, frosty nugs 1ml, cal/mag 2 ml, 1.5 ml slf-100 and 1.5 ml drops of balance. Made 6 liters water. Ppm in 265 ph 6.0 Runoff ppm 956 ph 6.8. I believe this was her last light feed. That home stretch is in the sights. LETS GO! 💪💪💪🤘 3-29 Plain ph water Ppm in 10 ph 6.2 Runoff 746 ph 6.9 after 5 liters Gave 1000ml more Ppm 605 ph 6.6 Mark this as start of flush 💪 Lets go!!!!! Super stoked 🔥🔥🔥 See you next week!

Perfect strain for begginer growers and not only. Very easy to grow. Plant is very resistant to any stressful conditions . (Heat, cold, I was overfeeding but she was taking it more and more without any problems) She was growing very fast in vegetation, But took 12 weeks of flowering period. (Maybe that was my faulth cause it’s only my second grow and i missed something) Buds are very dense with sweet berry aroma. I could not wait untill the end of drying period and had a taste of just a little bud. That shit is very strong even for experienced smokers. Huge to breeders 11/10. If you have not tryed to gro Green Gelato yet i wouls advise it to everybody. She will not dissapoint you. 💥👌🏽👌🏽

Following The Grow Boss tips on YouTube "...yield is based on light, quality is based on growers talent" "...number one problem is, too much light, too much water, too many nutrients" Nutrients : (after having issues with nut burns, I decided to use Grow Boss's perfect ppm calculator) Invasion T (Glomus intraradices BEG72 and TRICHODERMA atrovide MUCL45632) 1g / plant Monster X mycorhizes (500 000 propaguls / Kg , made in vitro) 2g / 20cl then complete to make 1l Humic Fulvic Booster (humic and fulvic acids) 1ml / 1l Cannazym 2.5ml / 1l Rhizoponics 0.4ml/1l Lights: 2 x Adjust-A-Wings Avenger 600w HPS Lumatek 90000 Lumens 1000PAR 600w HPS Philips Son-t Green Power 95000 Lumens Soil:Platinium Royal Mix premium quality What is vapor pressure deficit? Often, marijuana growers who have their plants in indoor grow tents or rooms with artificial lighting, take into account parameters such as temperature and relative humidity to maximize plants growth and bloom, thus obtaining abundant harvest with top quality flowers. As we will see later, these factors affect different processes of the plant, such as transpiration or nutrient uptake. However, we usually forget about another important factor that is related to the aforementioned ones: vapor pressure deficit or VPD. Broadly speaking, VPD is the difference between the amount of water vapor that the atmosphere is able to retain (which depends on temperature) and the amount of water vapor contained in it (relative humidity). It is usually measured in kilopascals (kPa). Providing our plants with a correct relationship between temperature and relative moisture will keep us on the right VPD parameters, increasing the plant’s activity and thus improving its growth and showing its full potential during the flowering phase. The ideal would be to adjust both parameters (temperature and humidity) to get the best possible VPD value, so that the development of plants will be amazing.In the chart above you can see the right temperature and moisture values to maximize the development of cannabis plants. The green zone shows you optimal values of VPD, in which it would be ideal to maintain the environment. The orange zone shows correct values, in which plants should not have problems to develop normally. However, red areas show values in which your plants will be very far from hit their full potential, since the relation between temperature and moisture is not optimal. With relatively high values of VPD (between 5 and 12) plants tend to open their stomata and release a considerable amount of water vapor into the environment (increasing their transpiration). This increase in transpiration results in an increase in the plant’s photosynthetic activity, which will need more nutrients and will improve its overall growth, both during growth and bloom. The best range is between 7.5 and 10.5, which we have marked in green. However, we must be careful that VPD is not too high (dark red zone) since the plant would close its stomata to avoid releasing too much water vapor to the environment, which would result in fast dehydration due to excessive transpiration. On the other hand, if VPD is too low (light red zone), the plant will also close its stomata for not releasing more water into the atmosphere, which in this case would be already saturated (it would have reached the maximum water retention capacity in a specific temperature). In this way, reducing transpiration will also reduce photosynthesis, which has a direct impact on the plant’s development and yield. That way, VPD is essential when it comes to offer the best conditions for the development of plants, also to understand its water requirements according to the nutrients used and thus adjust them correctly to meet the grower’s expectations. N/B: SAY NO TO DRUGS -[Day 90] The plants are getting massive, not a lot of space left in the room, each pictures are token back against the wall or on top of a chair. The Super Skunk shall be ready first , the trichomes are visible without using a microscope, the scent is like an amazing candy floss coated with Skunk pee 😅Boerejongens quality @Home 😊 -[Day 93] Switching Buld Lumatek 90000 Lumens 1000PAR to SuperPlant Super Red 85000 Lumens 2000K 1498nm Lightening under the 1500nm wavelength (2000K) just between the NIR and the Microwave length, can't stand in the room too long without getting tears and shining eyes. Buds shall start to blowup like pineapples, increasing yield. -[Day 98] Everything is getting frosty. Starting to decrease RH . -[Day 103] Today the Y Griega started to push on her terpenes, believe it or not that plant smell stronger than the 6 giants Skunks (the Skunk strain is already a very strong smelling plant), she smell like a coffeeshop front door, the fragrance is absolutely amazing and fantastic, I will definitely grow a full crop of that strain ! -[Day 105] 42 days of Blooming folks ! It's getting serious now 😄 If it can helps you to realize, each plants gots 4 side and a middle, each sides gots 4-6 buds and there's 5-6 buds in the middle, there's 11 plants of 1,60m/5.25ft, how many buds does it makes ?? The correct answer will win 1 like 😅😂😅😂 -[Day 106] WEEK 7 of flowering, the end is close my friends, I'm trying to give you the best shots as possible, I wish I'd could share a good smoke from this crop with you guys ....😉 -[Day 113] WEEK 8 starting, every beginning has an end, this is where the Fall is gonna start. -[Day 115] LADY'S AND GENTLEMEN !!! In the Indica's category the winner is .... ruuuuummmmmbbbbbllllleeee ..... VANILLA KUSH !!!!!! I've seriously tough the Super Skunks will be ready first, but Vanilla Kush has shown milky tric's after 52 days of Blooming, waiting for some few ambers tric's before starting the Flush. -[Day 121] Hopefully for me I didn't trust in breeders flowering periods I would have f*ck up the crop ... Plants are fading slowly and naturally, I won't need to flush. Checking the trichomes every 4 days, the crop will probably need another 2-3 weeks. All plants are running on water now till the end. Buds are ripening, the smell has turn into a kind of roasted coffee beans with Skunk pee and cotton candy. -[Day 122] Milky tric's spotted on Blueberry after 59 days of blooming -[Day 123] 60 Days of blooming, gonna flush them all

Hey everyone :-). Today is the flowering day 56 since the time change to 12/12 h. Both phenotypes continue to develop great 😍. The flowers are getting thicker and thicker and are slowly but surely coming to an end 😄. They smell extremely tasty 😍. On the leaves you can clearly see that it is slowly consuming its last nutrients :-). Next week the trichomes will be checked and then a decision will be made when and how they are rinsed :-). It was poured 3 times this week per pot with 1.2 l. The tent was cleaned and the humidifier refilled :-). Otherwise there is nothing to report this week and I wish you a lot of fun with the update 🙏🏻. Stay healthy and let it grow 😄 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

16.06

Blütewoche 5