Recommended
Likes
Comments
Share
@Kushizlez
Follow
Day 42-49 (June 11th - June 18th) (Day 43) I need to work on my early veg times. Things are just too slow in the seedling stage. Next round I will use a coco/Destiny blend for the better aeration and lower EC. Even with my indoor plants. I notice plants started in coco root way faster. Not just with weed either. All plants seem to like it better. Coco is far superior to peat imo. (Day 44) I’m pruning off the lower branches on my rooted blackberry clone. It’s cool to see it’s weird reveged structure. Lots of the fan leaves have trichomes on them. (Day 45) Something really weird is happening to Grapefruit #3. The leaves are browning and starting to gnarl. It could be an insect of some sort as it’s the only plant looking like that. (Day 47) It just hailed super badly and the leaves on some of the plants are pretty damaged. In my neighboring town the hail caused multimillions in damage so we got lucky here. I’m going to spray some method 1 pps prevention spray today to help keep pests at bay. I will try to do it in overcast or shade. I’m seeing what looks like thrip damage but there is no way they can survive the cold nights here. Dog shit in my yard is attracting flies which then land on plants spreading god knows what. (Day 48) Autos are still really stunted. I wasn’t able to find out how big they will get so I will just wait and see. I would guess they’re in their flowering stretch because their growth is unusually fast right now. I will probably just end up with 6-10 inch ornamental plants for autos. Definitely should have started them around mid summer in coco then transplanted. Time is of the essence with autos it seems. (Day 49) Photoperiod plants are looking really happy but growth is stunted from the cold and lack of light. I was hoping for bigger plants by now. A lot of growth can happen in 2 weeks so we’ll see. I’m definitely not transplanting on the 21st but the sooner I do it the better. The bbb clones are struggling hard to root but I can see new growth on them starting to push out. My clones are taking a really long time to establish. Every plant here, I don’t care how stunted, must be flipped by July 15th.
Likes
1
Share
We want to make 12 lbs per 4x8 bed it have 10 plant avg. per 1 cola = 5-10 gram But my coffin Candy is 60-100 top-cola per 1 plant Total 10 plant = 800-1,000 cola per 1 bed Waiting for mission
Likes
35
Share
@Belverde
Follow
Welcome growers Third week of life ended for this this little CREAM CARAMEL 🍬🍭🍫 She still growing in a growbox, 120x90 (cm) with nine other ladyes of different genetics 🌿🌿🌿 Looks pretty happy, great vigor and big leafs 🍁 Earlier in the week I transplanted into a 3l plastic pot.. Usually my choice of pot is the smartpot or the airpot 💯 And so, considering that the soil will obviously remain less aerated than usual, I have chosen to use a greater quantity of coco coir in the substrate I roughly prepared a mix of 50% light-mix (Canna professional and Biobizz), a 30% of coco coir (Atami), 10% worm-cast or humus (Atami) and around a 5% perlite wich it's already present in the light -mix.. I have also put a few micorizzae (Micosat F), like 10 grams, in direct contact with the roots and around 4 grams of Microlife (Bionova) in pellet form I will use this last one also for making an areated Tea, but during flowering.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. Root-Juice (Biobizz) and Rizostimo (Biomagno) for the last time, plus a little bit of silicium (Bionova) and then Activator (Biomagno) / Crescita (Biomagno) / The Missing Link (Bionova) / X-Cell (Bionova) {This last two i have used in a foliar spray solution} Simply a little bit of everything at any watering 💧 About the lights 💡 I currently using for the first time, two Mars-Hydro SP3000, running at 25% of the power for now.. Next week im going to increase at least to 50% ⬆️ Onestly this lights looks pretty solid, definetly intense, with a spectrum really close ro the sun light One of the cool things about it it's that you can connected each one toghter with a cable and so you can controll the intensity of the lights very easy, in a precis way 👌 We will see in this months how they works And that's all.. See you at the end of week n°4 📆 Thanks a lot for reading, hope you enjoyed 😎👍 FC ✌️ 🇮🇹
Likes
169
Share
Gorilla came down three days and ten hours ago, had the whole grow room to spare so she was hung whole upside down after just a bit of trimming for the main fan leaves that sort of thing. First day 24°C 60% humidity, second day 26-28°C 50% humidity, third day 25.5 °C 35% humidity. I had the exhaust and the fan going which gave this very nice light indirect breeze on these ladies. Really amazing smell that i had not really noticed until D-day, pistachios and christmas pine. Thought i was golden until i realised they were drying faster than i wanted. Ended up with 65/70% humidity which made these buds kinda airy in a way. Also the way the gorilla grows there were loads of tiny stems everywhere was a killer trying to get them out, ended up mincen some of the buds somewhat. Gorilla glue is absolutely a great auto to run. In ten gal it was tripple the size of my stunted one. 370 wet, hopefully something close to 100 dry - let's see I'll update in a couple of weeks. The gorilla grows bushy quickly, by week 3 it was noticeably more bushy than the rest. Kinda took an extra week to really start flowering then it stretched 20-50 cm a week for four weeks. In all it's close to 1.5 meters in height, loads of colas, maybe twice or three times as many as the GSC. Next time i'm gonna prune the flower nodes further down the cola. The buds themselves are quite thin, but rock solid much harder than any other strain i've grown so far - but this is my first time growen so take that with a grain of salt. The buds are covered in frost, trykes all over, oily oily oily, if you touch the buds your hands smells great for a few hours. Fun ! The trykes started appearing quite early and took a while's longer than the rest to get ripe - like truly ripe. So there were absolutely no ambers, maybe i saw one or two, but basically no ambers - this lady got cut down at the height of potency The grow tent. Once you dial it in it becomes your best friend, but if you're having trouble getting it stable it can become your worst nightmare. I made every mistake in the book. First off i set it up without really testing it with the lights on when using it as a germination room. Worked like a charmed until i turned it on. Took me weeks to figure it out. In the end running the AC the whole time through all of summer until it's very last day. 600W HPS through summer is not something i'm gonna be doing again. With my wing reflector there was nothing i could do except keep the lamps high, led to a lot of stretching. Cool tube is the only way to go. The HPS started flickering half way through veg and it died while I was away. I ended up going through 5 of those small fans until i realized & got a box fan. Once I accidently had it pointing straight at them for 8 hours or more a couple of times on max.… So i got a white 150W fan from china i also got Silent TT 123 W fan and hooked it onto the cool tube. Great fan, huge, black, strong, and with temperature control. I call him big dick cop killer because he's black and beats the heat. get it? Had two 90° bends outflowing for the exhaust and the heat just wasn't getting dissipated quick enough. Both of them together I could rest my hand on the cool tube with ease. i was able to test out temps and lux at various points in the grow room and figured i could have up to 4 degrees difference between the base and the top of the plant, still got it pretty stable. I had differences in lux from several 100 to several 1000 different places in the tent, probably because I was hanging the filter, the fan and the cooltube all crooked by then, but at that point my grow was a slow moving trainwreck. I had everything I needed to dial in my lamp to plant distance too, but couldn’t. I went bio which was nice, but i think I should try synthtetics or a mix next time. The soil spawned some flies which were easy to get rid of. Then when i tried measuring the EC of the soil, i'm afraisd that the soil particulates kind of skew results. Thought the soil could buff out anything really but rhizotonic had the better of me before i could get my PH strips in.... not that it matters but I broke my PH meter pretty quickly anyway. Live and learn ! Watering itself I think is something you should pay attention to, you don’t want to be pouring it out and getting your soil compacted from the water. Seedlings are a different thing, not too much water, don’t keep the medium too wet, maybe watering with precision is something that could be done. Using the liquid ferts was quite tedious, and I have doubts about using all bio in general, using liquid fertilisers regularly in soil, and following the labels. Thing is you shouldn’t really need much of these ferts in soil anyway, yet still got cal mag deficiencies so you tell me! Well there's a fair few things i wouldn't do again, like grow in the heat of summer with a 600W HPS and the AC on. I fumbled around before I had my dimmable ballast, and stressed out the seedlings which is a no no. Once I got the ballast I lowered then raised the intensity from 250 to 600 in three weeks light stressing my poor babies even more. It never occurred to me to plan out a grow, next time i'll definitely plan it out and make sure I'm kitted out a bit better going in. Same for the grow room, avoid bends in the piping, set the thing up a run it before i throw the plants in there, wont hang my filter above that high, and keep the fan on the ground maybe. Grow room wise I’m kitted out, got everything I need, but next time will install some 70 micron mesh in all my intakes just in case. Also never growing without cal mag again even in soil ! I'll probably do straight drops into forever homes directly too, no sense faffing about like the @silverback_guerilla 😂. It's not all bad news though, loads of things i would do again. I would even grow in soil again, especially now i have a bunch of soil ferts from america (thanks @mrs_larimar !!!). I wouldn't mind using the 600W HPS again, worked well enough ! most importantly i will be using TNB CO2 again because it makes a clear difference even if i don't have any of my own grows to compare it to. Another critical thing i did which i'll be using again is the chelation agents, i'm going to want to stay more on top of those and might even use as foliar spray on XXLs between weeks 3 and 4 veg. I ended up spraying rhiz second to third week, will definitely add some cal mag in the foliar spray. Mag sulfur supplement is going in next time too, if you put a lot of light, you need a lot of magnesium, so that's happening again for sure. I’ve been looking at predator insects pretty seriously, ladybugs are a must clearly, but I might throw in some other ones too just to be sure. It's a lot about what you do when you're not growing , learning about it, meeting great folks (see the comments for all my thanks), and enjoying watching a plant grow slowly. I learned so much about a plant that’s been a part of my life since I was eleven, I think I was 15 when I first thought it was silly not to grow, fifteen years later I can’t believe how long it took me to try it out ! Getting a crash course in horticulture, using a tent, and generally learning about the bio-dynamic world that surrounds us was really rewarding. Just got some cool ferts in the mail all the way from America, so thanks to growgreentrees.com and growcaps might try them side by side. Expecting some cool testers soon too so thanks to @pharmaz my boy past the bridge ! I’ll pop those right in FTB5, Auto Zkits, and something else I don’t know yet  cream cookies or lsd35? I really wanted to get out of the dirt with some coco or DWCs but oh well another soil grow can’t hurt ! A big thank you to @mrs_Larimar GD and the folks at trim bag for the gear ! I’ve already got a spinning blade thing, so let’s see how this compares , but at least now I’ve got cool scissors to do all that trimming – bless ! Just wanted to say thanks for holding my hand to a few folks @mrs_larimar of course, thank you so much and looking forward to some fun times on gd; my main man @mudbug great hanging out with you growmie ; @pharmaz and @silverback_guerilla; new friends like @bigdaddyk @valhallasgarden and @slimsativa; My ghost brother @beans, check out his one leaf GONNA MAKE IT GONNA BEAST IT ; Everyone who stopped by to help me @B4RNS of course, @farmerbrett too, @hawkbo, @tryhard, @tonino, @tazard @mad_scientist @spinnergrow, @poleeg1986 – he’s an amazing European canna porno director check out his gorillas my good lord save me; special thanks to all the Growvengers, and the @dudegrowsweed ; @wheetobeme, @experimentgreen, @weedeep, @chi_town_white_boy @chillum_mafia and even @mulch – play your part man bless ! Thanks to Nico @fast_buds for some cool testers, my favorite hat and some fun times on GD ! A final recap of everything I learned (see for yourself in the diary) : never buy a kit, buy local, buy direct, less is more, go big on fans, keep refills around, always add CalMag CO2 and chelation agents, no bends in the pipes, cover your intakes with micro mesh, nail the first couple weeks of flower and it’s smooth sailing, always protect your eyes ! Just one last thing though: have to say it’s pretty great having access to all the best horticuralists from around the world. Shout outs to all my North American and South American grower friends, @russiangrower and all the east European growers, my Scandinavian friends, Spanish and German growers, and African and Japanese growers, I don’t understand everything you’re saying all the time but I like your style ! You won’t know until you grow ! Dassit 🚀000000
Likes
199
Share
Hi everyone, Weed brothers! This genetics is really a rock! Strong and resistant stems and a beautiful roof of flowers No signs of deficiencies .... I think I'm going very well .... hopefully in an excellent harvest
Likes
11
Share
First time growing these Ayahuasca Purple. When i saw it first i liked it as a plant and as a bud in the end of the grow and i think and really hope i get really good results from it. If anyone has any tips for me i would be to happy to follow so i can improve the grow better. 🤞
Processing
Likes
20
Share
@ThatZimbo
Follow
From week 2 to 3 in flower the plant took off and almost shot itself into the light overnight. Upped the bloom nutrients to 36, interested to see how the plants handle it. I have maxed the height in the tent, reflector is on the top of the tent and the plants are 20 to 24cm away. Can't do much about the height so managing the heat between the bulb and plants.
Likes
6
Share
Still fattening up. Ladies look beautiful. Still on a heavy feed chart for FloraSeries. Banana daddy chilling by the pool. She looks like fire 🔥 What do you think. Post a comment below
Processing
Likes
21
Share
I've cut down on grow at this point as the soil seems to have a lot. I'll feed for another week then think about Flushing. The kalimist will keep getting fed bloom and grow as its only been flowering for about 3 weeks due to taking longer to force flower.
Likes
2
Share
Two arms looking thick! 👍🏾
Likes
41
Share
Harvested week 12. Solid root mass. She yielded about 5-10g which I quick dried and smoked as I had nothing in at the time.
Likes
6
Share
This variety is extremely productive with an incredible flower / leaf ratio despite its large size. I collected the first plant of this variety two days ago so I will update the data on the final weight, the taste and the effect during the Christmas period, meanwhile I wish you a Merry Christmas and happy holidays with a video dedicated to male growers 😋 obviously many wishes for a Merry Christmas and happy holidays, but without videos, to all the female growers! 😘 Data updated on January 9, 2020
Likes
8
Share
Second week with the mini humidifier here and so far mixed results. I need something with larger capacity so I don't have to refill it every single day, but still small enough to fit the IKEA box. Strongly considering to add a heated mat too at some point. There seems to be quite a bit of temperature difference between the plant and the bottom of the pot. Maybe just some insulations. Sooo many things to try, but let's focus on not overfeeding them 😃
Likes
8
Share
Nute burn on older growth. Slight yellowing of new growths’ tips; Larry OG originally started in a rock wool cube and was then transplanted into soil. The Larry og is very small and yellow with major bleaching; Raised light height by 3in. (15in. -> 18in.)
Likes
7
Share
i’d say another two weeks on these girls and they are about done one of the other phenos of this finished up quite quickly and it’s already drying Can’t wait to give you the full results and numbers 🔥 and remember It’s 420 somewhere
Likes
22
Share
Scrog before preflowering. Add new photos 3 days more grow
Likes
11
Share
Buds are continuing to swell and the smell is really starting to come through. Ordered a magnifying glass a couple days ago so I can start to check out the trichomes on the plant
Likes
3
Share
@CaliJ
Follow
fast eddy measures 60 cm, the 3 gelato cookies between 70 and 80 cm, the 3 northern light from 90 cm to 1 meter 20, the smell is stronger when the tent is opened, major heat problem solved thanks to a portable air conditioning🍀