Début du rinçage 😁😁

Estos videos fueron echos el 25 de diciembre de 2021. Creciendo poco a poco, se les hizo poda de bajos y tutorado. feliz navidad les desean las babys! ig: @micro.semilla

Let’s start with the smell absolutely wonderful it’s floral & sweet it reminds me a jasmine green tea🤤 The buds are SUPER sticky✂️ See you in one month for the smoke review Take care 😎 Oh & happy new year

FBA2506-week 1 of Veg This week has been wild. Once the roots made a foundation the upper growth has been explosive the last few days. Really cool to watch and see the daily growth. I introduce calmag and grow nutrients this week starting at a 1/4 strength. All in all they've responded well showing no burn what so ever. Happy Growing

Week 4 Light cycle=18/6 Light Power=100w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 60% Low Rh= % Rh step=0% Speed max=5 Speed min=1 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 20c Radiator off= above 21c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.2 DLI aim=22-30 EC aim=0.8 PH aim=6.2 Fri 12/1/24 #3 (Day 22) 📋 Turned pot 180 deg Sat 13/1/24 #3 (Day 23) 📋 pot is getting lighter, prob water tomorrow. Sun 14/1/24 #3 (Day 24) 📋 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Total volume made=12L Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=2.0ml/L Roots=0.2ml/L Easy Ph down=0.2ml/L Feed=nutes Volume=2L Ec=1.7 PH= 5.8/6.0 Time=4.45pm Runoff. Total runoff=100ml Ec=7.3 PH=5.2/5.4 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Mon 15/1/24 #3 (Day 25) 📋 turned pot 90 deg. Tue 16/1/24 #3 (Day 26) 📋 opened up the plant. wed 17/1/24 #3 (Day 27) 📋 removed 1st 3 fingered fan leaves. Installed the drippers. 🚿 foliar sprayed (cal-mag 5ml/L). Turned pot 90 deg. Thur 18/1/24 #3 (Day 28)**** 📋 H=22cm D=50cm DLI=26.9 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Total volume made=10L Neutralise=0.1ml/L Roots=0.25ml/L Easy Ph down=0ml/L Feed=Water Volume=2.5L Ec=0.2 PH= 6.5/6.6 Time=8.30pm Runoff. Total runoff=360ml Ec=6.3 PH=5.3/ 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 11.00pm Increased light power from 100w to 120w. This week she really started to kick into gear. She is loosing the tiger stripes by the looks of her. Back soon. Take it easy.

The nugs are starting to get orange hairs on them. Item 9 has thick nugs and red velvet is frosty.

Still going

Hello growers and tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Alright so as promised to make up for the few pictures from last week I've got more photos and a little video to see more detail. She hasn't stopped growing yet, that's another 10cm this week. Really really visible for my top to neighbors.. 😂 Now I'm just at a point where it's like fuck it, whatever happens happens. She's not stacking as good as I hope on the top four colas. For my taste there's too much space between each node. The bottom growth isn't getting that much light anymore but there's some little bud sites.. No smell yet but I'm guessing that'll kick in next week. That's it for this week. Stay tuned to see how she flowers. Stay safe!

12/15: Some plants are taking too long to transition and stretching beyond my space constraints, so I dialed the photoperiod back to 12/12. 12/16: Fed today and rotated edge plants. Added another 150w of 3000k below the canopy. 12/17: Worked on ventilation...no A/C necessary now, as I'm using another AC Infinity 6" fan to intake outdoor air into the closet whenever temps reach 75f..and it's been cold as hell outside.👍 The final trick will be to replace the 6" exhaust fan with an 8" so as to be able to fully exchange the closet air faster ...but that's gonna have to wait til next season.

10 September Harvest - see pictures. While some growers leave the plant whole when they cut, I do not. It is a personal preference and situational convenience if your a home grower. I chose to cut large, long branches, and remove any whole water leaves, as long as it doesn’t interfere with the bud formation. I don’t trim yet. This is done for a few of reasons: 1) It’s my last good close-up look at her until another 5 days or more, 2) I don’t want wet leaves drying on my buds if I can help it, and 3) I occasionally like being able to shine a small LED flashlight on the flowers while its drying. Mold is our greatest problem as growers, it can destroy a beautiful grow right up until the end process. Then I hang it in a dark closet, provide circulation and ventilation. Light and heat, anything above 80 degrees F, will start a break down in cannabinoids during the dry, it is ideal to stay away from both. I’m fortunate that a humidity level of 50- 55% and temperature of 65-70 degrees F is fairly consistent and easy to maintain. Anything below 60 degree F will prevent the adequate drying out of chlorophyll. Almost all my flower routinely take 5-7 days, some a little longer, to properly dry out. 15 September Trim - see pictures. First you’ll notice the buds have shrunk up to half their original size. This is just a fact that we growers have to deal with. Due to evaporation without uptake of water, it takes about 3 days for the chlorophyll to dry up, then slowly go through a chemical change. Along with the leaves, cannabinoids also begin a chemical change after 3 days called decarboxylation. A slow process where the THC level increases while curing. You want the leaf to be dry so they can be hand trimmed easily, but you do not want that bud so dry that it starts to fall apart in your hand. Try to handle carefully by the main stem to avoid touching the bud all together. A lot of these cut leaves will be covered with trichomes, good for making oils, or other products, it’s an option worth looking into keeping it. After trimming, I do separate a few premium flowers for my first smoq. Then loosely fill wide mouth quart mason jars with about 1 oz/28 gr of product per jar. I seal the lids for a few hours to determine what relative humidity they are at, see hygrometer pic, before making a decision to put in a 62% humidity control pack of my choice or to wait, then place in secure in a cool dark place with stable humidity and temperature. It is very important to then observe/burp or exchange the air as needed, up to several times a day, until 62% rh is achieved. Once your close to to your mark, put in your desired RH level control terpene shield. If you have a problem getting there: 1) it has dried out too much, no real solution, try to put several large cut stems left over from harvest into the jars with the buds to try and increase humidty, 2) it has not dried out enough, in this case no problem, just remove and dry out a little more. This is also a personal choice, some people like it drier in the 50% plus range. Whatever you do, research and preserve. At that time burping is no longer required. Cannabis will reach its peak potency potential at about 40 or so days into the cure. The finished product should be a perfect grind when cured correctly without clogging up your grinder, this could take a month. Now that I’ve said that, I’m sure someone has grown something that they have not been able to grind. It can remain in this state for an easy 6 months with little change, locking in all the terpenes and potencies. All you need to do is occasionally check the product to ensure there are no molds. If your grow/harvest/cure techniques are good this should not be an issue. It would not be uncommon to find many cannabis strains will last, with small degradable change, for up to one year after being stored this way. Using an airtight glass container, controlled relative humidity, maintained low temperature, and kept in darkness will equal maximum shelf life. Always avoid direct sunlight and temperatures above 80 degrees F. The reasons I’ve ultimately chosen Deep Water Culture as a grow medium. Each has their own pros and cons indeed. I found the most efficient, less maintenance and ideal solution for my situation was DWC. Burdens to overcome depend on size up set-up; initial equipment cost, size of containers, ph monitors, air pumps, type of water to use-reverse osmosis, RO cost/set-up/maintenance, ways to transfer/change water and nutrients, what nutrients to use and schedules, takes several grows to learn and understand, a 1 year learning curv, easy to nutrient burn. The Benefits of growing in water; no dirt, no bugs, no diseases, rare nutrient deficiencies/toxicities, steady and rapid growth that enables the plant to reach its genetic potential. After harvest, there is about a 1 hour equipment cleanup, sterilization and turn around process before replanting. Cannabis will perform in so many different ways and mediums, no one way is the best and the best way is the one you are using, right. Chose what works for you in the long run. There will always be an initial cost in set-up. My advice if one were in need to cut corners, I would not recommend cheap lights. This single factor is the most critical, afford for the best. The notion that organic and water has a different taste, flavor and potency effect is absolutely debatable. The more we learn the better we grow and experience is always the best teacher. This is what works for me and my methods of growing in general from beginning to end. A BIG “Thank You” to everyone who stopped by to take a look. My next diary will start at the beginning of October 2023 with a Forbidden Runtz Auto. There will be minor differences during the grow. I enjoy Auto strains simply by what can be achieved in a short time. No matter the strain they will unveil one thing in common, the demand for attention. Many times over it is the anecdotal gardener that surmount plant scientist. Last should I mention, do not forget to stop and enjoy the fruits of your labour...

Just before last defoliation

The plants are doing well but I'm not really convinced of AUTO‘s outdoor but they are fast I have to leave that to them ;-D

…😎✌️

She’s the queen of the tent, sweet smelling sticky and chunking up nicely . Needs a defol this week . Feeeding her up now and looking for her to stack on the weight

Aug 24: starting the sixth week of flowering and this Blueberry Pie F1 Fast is amazing. The development of the flowers has been very fast and they are nice and big and thickening quickly. Thanks to Mrs.Larimar and I totally agree that these F1 hybrids are amazing. Did a watering round with potassium silicate, and likely the last one but we’ll see. Probably three weeks at most to go, so no more molasses and now mostly just pHed water to the finish line. Did a final light application of malted barley and Power Bloom and watered in. Removed fan leaves that were growing inward and shading buds. Aug 25: Flash pics are only okay when using a far red light after. Don’t take flash pics of plants unless you also have a red light. Having said that, I love taking flash pics of my plants. Aug 26: sunny again but not too hot and had the UV lights going. To spread the UV around I rotate the plant 90 degrees three times. This seems to be okay. This plant is the furthest along in flowering so I’m giving it most of the UV light and the slower ones can wait until they’re closer to harvest. Aug 27: she’s doing great. Up to 12 h of rain tonight with the potential for a pretty intense thunder or hail storm in middle of the night. All plants are in the garage tonight to ride it out. Aug 28: spent last night in the garage to stay out of the all night rain that was forecast. Turned out to just be light rain. Overcast all day and no UV light today. Aug 29: this plant is amazing, but I’ve said that before. The other day I noticed that some branches on the side are heavy enough that they are now slumping against the SCROG net. Fun to see that. The flowers are noticeably bigger each day and she still looks very happy. She is also becoming quite top heavy but the water bottle weights and five gallon pails of water hold it stable in the winds.

it's big I must say that it has an imposing structure although it is still low and its stem is very big and mighty like the leaves no problem to highlight here everything is ok ... I forgot .... the bloom has already started a few days ...