?????

The buds are starting to form. The smell is strong when I open the cabinet, but with the filter, it doesn't smell. I corrected the deficiencies I had correctly. I defoliated a bit to allow good light penetration. I'll let you judge how they look now. I did a week of stretching, lowering the light by 1 hour each day.

They are coming along very nicely. I took my first cutting from the mother this week. I cut her back to the 4th node and began cloning the cutting. I trimmed the leaves and branches below the top and put her in a net pot with about an inch of her stem extending below the pot that was dipped in clonex gel. I put the net pot in my veg tank and hopefully I’ll get roots in the next week or two. Thanks again for looking!

I watered yesterday with just plain water with a dash of calmag, I am now done feeding her as I am hoping she will be fully mature shortly

So for now i am free to grow anything. No restriction at all ¡¡¡ Now i use the "" Atami Janeco Lightmix "" substrate for this plant... I hope this one are the same quality of LIGHT MIX BIOBIZZ

* ***************** Week 1 of Growth From Seed, April 11 to 17, 2020 - Days 1 to 7 from germination ********************** * Okay, we are off running now. Through germination and was delighted to experience 100% success rate👍 Excited to run this strain from Mephisto. It is supposed to be a couple of their strongest and fruitiest crossed. My Skywalker was a good experience and I could have ran her again but I wanted to try another strain from this breeder and see if there are some similarities......this sounded fun👍😋 Just popped one of these girls and will probably miss some timing but that is how the game works.......learn from this one with hopes of dialing in the siblings😀👍 Greater focus on VPD this run. Already pushing the humidity higher than I ever have with having controller set at 72% with temperature at 79 degrees. I have been reviewing the numbers and I have normally been close but it looks like I have to raise everything by about 10% and for a few weeks long😬😬😬😬😬😬 Trust the science and lets learn some more from this grow!!! *****Daily Detail: Apr 11, Day 1: - VPD - 1.2 - 500ml first watering given with nutrients as listed. (minus Velokelp) - pH water to 5.6 - Girl is up and looking like she is ready to go. Apr 12, Day 2: - VPD - 1.0 - 500ml feeding with VeloKelp @ 2ml/L, Piranha & Voodoo @ 1ml/L. pH to 5.6 - lowered light intensity a bit more. - She is getting taller now. Seems to be speeding up. Still the slowest of the group. - She seems most affected by too much light. Apr 13, Day 3 - VPD - 1.2 - 500ml water with 0.5ml/L each of Piranha & Voodoo, Dual Fuel. - 300ppm with 5.4pH. Apr 14, Day 4 - VPD - 1.1 - 500ml water with Virtathrive and Piranha & Voodoo Juice @ 1ml/L, VeloKelp @ 2ml/L, and SensiCal @ 0.5ml/L. - 210ppm with 5.5pH. - She is doing well. Starting to see the first set of leaves growing a little odd. Both offset to one side of the pot. Good progress though little early to worry about some things. Apr 15, Day 5 - VPD 1.0 - 250ml water with VeloKelp @ 1ml/L. - 95ppm with 5.4pH. - She was a little slow and little dark but she seems to be coming along. Once she strengthens up the bend should come out of her stem👌🤞 Apr 16, Day 6 - VPD 1.0 - 500ml water with Piranha & Voodoo @ 1ml/L, Vitathrive @ 0.5ml/L, Dual Fuel @ 0.5ml/L. - 300ppm with 5.8pH - She is looking more healthy today. Being more robust. - Her second set of leaves are not as progressed as the other girls. Just an observation. Apr 17, Day 7 - VPD 1.1 - Turned on flower light on UnitFarm this afternoon and they are happier. - Dry out day today and no added water/feed, just misting. - Let the medium dry out a bit and give a nice week 2 feed tomorrow.....they are ready for a little more nutrients now. - Not a lot to report today. She is happier than yesterday and getting bigger......can’t ask for much more👍💪👌

End of veg for this beast. Maybe not the most flattering term for a lady but that's what she is 😂. She has taking the training well and I can't wait to see what sort of canopy she will give.

Dia 134 y semana 6 de floración,ultimo dia de vida de las plantas. Este año ha sido un poco raro las plantas han crecido como monstruos tuvieron un crecimiento espectacular un tallo muy grande y junto con sus ramas flexibles y muy resistentes. Pero al llegar el engorde de floración no se porque les falto el empujon final para hinchar el cogollo, tiene muy buena pinta , mucha resina y muy fuerte buen olor pero me esperaba mas en la fase final. Cortamos ya que tambien habian orugas y no terminaba de eliminarlas por completo, la semana que viene era entera de lluvias así que decidi cortar un poco mas temprano para poder prevenir cualquier mal mayor, hay mucha gente que le gusta cortar antes de tiempo ya que el efecto es muy diferente, este año probaremos que tal.

1/29 Week 5 Nothing but the kind of problems I asked for, some white tips that mean an increase of runoff is needed. Half expected to see this as I have been varying the amount as a learning experiment. Will up to 20% for a few days In addition will be reducing nuets slightly keeping cal-mag as is until reason to change presents itself. Will be kind of boring the next couple of weeks at least till they get into the big tent. 1/30 Aeryn now at 15 inches Runoff at 40% and nuets reduced to lower pot EC Ive tossed out my old bottle of Cal-Mag I think its turned on me as these white tips did not appear until it was folded into the feed. Just no way this dose of nuets is causing the tips to show burning. 2/1 Major defoliation last night at lights out. Removed perhaps 25-40% or leaf mass on all plants to allow them to stay in the tent another two weeks. It was time to learn the process anyway, took a compromise path to doing it, some recommended taking more some less, hey sounded good to me. Plants doing very well after defoliation except for those aggravating white tips, going to be reducing Cal-Mag again to 1ml/gal and keep CT at 5ml/gal taking C-M to zero based on what I see. 2/2 Dropped Cal-Mag from feed, want to see if that has anything to do with those white tips. Runoff is at 40-50% ppm out under 900 so dam if I know. Will continue to defoliate as we go when something pokes its head where it does not belong. Otherwise they are beautiful, good job so far Fast Buds. 👍 2/3 man they recover fast, removed a few fan leaves that poked their heads where they shouldnt. Add Si to feed tomorrow for stem strength Not comfortable leaving these in veg for two more weeks, just asking for problems. So... Plan for flowering: Flipping this weekend so new week will still be veg. Removing one plant from the Moya tent to the Flowering tent to relieve space pressure as both tents will be set to 12/12 and just flower them all. Should have space in Moya to cover the few days they are in there with just three plants, have a bout 18" of light hang to work with. Thinking of moving Aeryn as she is largest and most likely to cause issues. Just not sure what the stretch is going to be 😳 2/4 The white tips were absolutely caused by the Cal-Mag, considering the doses and PPM that is puzzling to say the least. Adding Si for a few feeds to get em ready for flowering as I have no idea how these are going to grow so heading off some potentials. Plants hit 20" over night still flipping in a few days

They are growing nicely after feeding a compost tea ☕️ that was heavy in fungal matter. The buds are beginning to take shape and a couple of the plants have begun to deliver some bud formation. Smells are beginning to take effect as well, with heavy whiffs of earth and diesel.

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

_______________________________________________________ Mo. 9.3. - 3 Liter pro Pflanze gegossen (ca. 200ml Drain) 1,2 ml / Liter "Calmag" 1,0 ml / Liter "Bio Grow" 3,0 ml / Liter "Bio Bloom" 1,0 ml / Liter "Top Max" Ph 6,3 / 600 qqm _______________________________________________________ Di. 10.3. - Luftentfeuchter in der Dunkelphase AN (45% / Low / Auto) _______________________________________________________

Going well, have trained her horizontally! Now she has the desired shape & I will let her grow upwards to create some nice Cola's.

Posting the phenos when I do them

Just water the past week to save on nutes. I think this is the final week for the two Green Gelato plants. I will post trichomes later but I see at least 5 percent amber but I'll have to make sure it's not sugar leaves. Royal Gorilla is still waaaaaay behind, I'm gonna chuck a couple of autos in while that finishes since they don't mind the different lights too much. Not sure what I'm gonna grow next proper tho lol. Thinking something from Barney's again.

Thursday the 8th of June day 43 of 12/12 just plain ph water from now until harvest