Likes
Comments
Share
Likes
18
Share
@Diips
Follow
d.79. done alittle lst in order to get some of the colas away from the hot zone.. gotta be creative when it all grows too close to the light 😅. big lady she is and really smelly nice!. also
Likes
13
Share
Likes
14
Share
@MG2009
Follow
02/04/2022 Day 5 41days old and starting to show their genders, next week will be less plants for sure, identity of a couple males confirmed. Once all girls are confirmed it's straight to flower room.😁 Grape skunk potted up she's tall girl compared to other confirmed grape skunk.
Likes
10
Share
Day 43 : Watering with co2 tab / 5L. Also added food again because i think they need it. Increased ppm to 850. Maybe the next one will be pure water. Ventilation works all the time when lights are on. Temp and humi are stable and this is good for the girls. she still grows. Patience is the key always. Also removed some burned leaves from all ladies. Edit (Day 47) : Watering with co2 tab every 5L. I watered with juices again at 850ppm because i felt that they need it. Only DsD drank pure water because of burns. All ladies enjoy this bright sun for sure. I have a very good combination of sprectrums. Cree cobs are in 3000k and HPS at 2000k.
Likes
6
Share
* Week 3 Veg - 1/1/2024 - 4.5 Inches - Topped main cola - Running Raw NPK only nute feed - 1 TSP a day with Myco* Since using mainly all RAW NPK nutrients I have seen a huge difference in size, growing and healthiness.
Likes
9
Share
Slowly we are getting to the finishing line, i would guess 2 or 3 weeks. She is doing very well, although she had all the problems at the start. The buds are swelling and she smells great fruity.
Likes
19
Share
@Doofy
Follow
They look good, the gurl in the back her flowers are gettin very nice!! 😍🤩🙏 I turn them 180° every 2 days 🙏 The one in front looks allmost ready... She´s lookin sharp, rocket to be launched... ❤️❤️ very thin plant, small harvest, small plant Sexy ladies!! ❤️❤️ she smells like berries and cream 😋😍 Gettin frosty...
Likes
6
Share
@Ninjabuds
Follow
Permanent marker the 1st thing that comes to mind when I think about these seedlings is the stem out of all 12 seedlings I have going in the tent the 2 Permanent Marker seedlings stems are think when the fan blows on them they don't sway at all. 1 of the 2 seedling has some interesting wide leaves Last grow I overwatered and had to toss them because growth got stunted and a bunch if fungus knats got to the soil. This time I'm trying promix potting soil wish I had tried promix hp but the store close by isn't a hudro store and that's what they had. So this time I'm being very cautious with the watering I'm only useing a spray bottle I'm currently giving 45 spray per solo cup every few days when it dries out. This promix soil seems to hold water decent so the 45 spray there is 0 water coming out the bottom the cup yet. Here soon I think I'm going to double the amount of spray to 90 and start letting the soil get dry dry before watering again. Probably will hold off on any nutes quite yet. I'm going from 24/0 to 20/4 light schedule this week. There getting to the point they won't strech as much is 4 hrs of darkness and I'm rasing the light intensity a little it's been around 150 I'm upping it to around 175. Most likely by the end of the week I'll probably be pushing 200 or close. Hopefully I can get them into the big tent soon At this stage I like to alternate having the fan blowing on them I feel it gives them time to recover and get stronger instead of wind stress. Also every few days I will turn the plants so they are facing away from the light making them grow back towards the light I fell it makes them stronger
Likes
2
Share
@Mars8_8
Follow
So first run back and we finished. Happy with the results but know I could have done a lot better. But overall like this strain. It puts out about .9 grams of rosin for every 7g smashed. Taste good and smooth. Burns white. Lower thc effects but I think having my lights to strong late harvest was more the issue.
Processing
Likes
3
Share
@Dico29
Follow
Day 120 Smells good buds are fatter and looking better then I thought last week, I flushed but I think I may have caused nutrient burn or nitrogen since my stems have turned purple also along the buds and tips or ideas of what I should try thanks Day 127 photos at the bottom
Likes
5
Share
Salut salut les Amis Nous voilà déjà à la fin du mois, mes fifilles viennent de passer en pré-floraison depuis vendredi je suis trop content de mes fifilles. J'ai commencé à leur mettre de l'engrais (PRO ORGANIC Grow et Bloom) pour la pré-floraison. Je mettrai le (Bloom Booster) pour la floraison. Je vous souhaite une bonne soirée à tous et à dans deux jours 😉🙃🙃
Likes
7
Share
Всем привет! Моему малашу сегодня 11 дней. Выглядит здоровым и счасиливым. Поливаю водой, ни чем не кормлю Признаков болезни и нехватки элементов не замечено! Всем и мира и добра!
Likes
57
Share
Views expressed are my own. All opinions are my own. The opinions expressed here belong solely to me and do not reflect the views of Growdiaries or Grandcru Genetics. The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. Grand Cru Genetics is a cannabis seed bank that emerged in 2018 from a group of breeders in Madrid to provide a satisfactory experience to all cannabis users. "If we do things, we do them well. Due to our experience in the sector and our taste for excellence, we know high quality and we seek it in everything we propose and do." "We have a “cultivate without giving up” philosophy that we apply to everything we do. We do not give up, we are friends of change, and we adapt as necessary in a still restricted sector." "We speak relaxed because we know how to relax. We are not intense or preachy; we accept everyone as they are, and we understand that farming is not for everyone. But for those who do, we are here to accompany you. We like to do it and tell it. We are experts in the field because we are the first to do it. We speak from experience and connect with others because we share the passion for cultivation." "Cannabis has the ability to show us a world of possibilities. When you cultivate and live its growth process, you enjoy a path full of emotions and not just the final destination. At Grand Cru we find beauty in small things. We are attentive, observant, detail-oriented and aware of everyday things, and we savor them without rushing." In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. I think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, the RH will begin to drop slowly to the desired level I set, and the extraction turns off when it reaches the desired RH. The plant, as it performs cellular respiration, will always release more water into the air; therefore, the RH% of the tent overnight will increase, as long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential, which will work wonders with mass flow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
6
Share
Continued with the LST as the plant starts to bush out. Increased the plant's food adding Miracle-Gro when feeding. Cycle of water with food, then water without food. Volume and frequency slowly increasing.
Likes
69
Share
@TOTEM
Follow
Good evening buds. I discovered I missed the Overdrive last week, and gave Bud Bud instead. Not a big problem, but I like to be precise when it comes to fertilize my plants. I think this is the last week with ferts. Next week (depending on trichomes development), flush time, and then harvest. Two weeks should be enough to see this baby complete her journey. Buds are already fat, but trichomes are still not so milky.
Likes
7
Share
really easy to grow mines came out smelling like pine Barrens mixed with lemon balm , while my wives smelled like complete skittles chem gas like. Similar to mephisto white chem tbh. Yeild awesome some nice beautiful nuggets. If you notice on mines was super leafy so I ended up using the trimbag. I used it for not even 15 seconds and results show. Stuff like this investing into products like the trimbag and my herbsnow dryer has been saving my ass and time for many grows now. End product shows everytime. Will have and updated smoke report in matter of weeks. Can easily see me growing this one again but in a bigger pot ^_^. But for 1.5s gals ill take it really happy.
Processing
Likes
29
Share
Feed Started With Tap Water Left Overnight For Chlorine/Chlorides To Evaporate. Next Day. Starting EC of our water is 0.15. I added 1ml of Rhiz Per Litre. Then Used Canna Terra Vega Until EC measured 0.4. I then used the mighty growth enhancer drop by drop until my EC measured 0.7 Finally i PH'd the mix to 6.2. Made sure the feed was of adequate temp and continued to feed. Next Two Feeds Are Just PH Water with a few drops of Rhiz 😎
Likes
69
Share
Just letting them cruise along. Increased the ec to 2.1 highest I think ill take it , but so far so good. Really wish I would have had controlled the stretch alil more so the buds would have filled out better. But the smell these gals are putting off Is so good. Can't wait to burn this stuff. !! But on we go into 2024, hope u all had a great time celebrating your new year. Best of luck to u in ur gardens thus year , happy 2024 gang !! If ur interested u can save some money on lights thru phlizon with this link. https://www.phlizonstore.com/?ref=Grow4Releaf9
Likes
176
Share
@DevilsBud
Follow
Hello fellow growers week 4 is upon us for the cookies gelato by RQS Day 22 Veg Phase I think i have bin trying to mutch technieks at same time idk it's my first grow . So the first topping i did didn't work there is still something sprouting out so i think that was fail on the cookies gelato #2 so i just Going to try to LST the main . Cookies Gelato #1 was topped yesterday and i think that work better 🤔 but i did say that with First topping 🤣🤣🤣. In the process i did twist some main leaves on both plants i hope that didn't do to mutch damage to the process . Like was saying before i am still new to and very eager to learn . But to mutch at same time cannot be good either Will see true the day's thanks for stopping by and have a look good luck growing everybody 💪💪 Day 23 Veg Phase So today i find out that i wasn't doing topping but FIMing . And yeah it looks like it . She didn't stop growing but made more sprouts 😎😎😎. Came home today and all looking good 👍👍 Day 24 Veg Phase Broke one of my big leaves 😢 with doing the LST clips . It was def my own fault but you learn from your mistakes 🤘 Day 25 Veg Phase They are looking good i see some yellow spots on some point of leaves but i think they had to much nutrients so i have bin giving just regular water in between watering . I have 4 plants growing and it looks like there all half week apart from each other . It's not very consistent but it def helps me see if something happens with First plant i can do something before it will happen to the other ones . Day 26 Veg Phase I have def bin giving them to much nut i saw white salt build up on my fabric pots . So today i have flush them with pH 6 water until all the soil was moist and would drain out . Now i am going to be not giving them anything until next week of growing phase 2days from now . And then start keeping up EC levels etc . Day 27 Veg Phase No watering just some LST with the clips on plant is def topped the other wel look your self it's a monster lol Day 28 Veg Phase Week 4 of Veg is over doing good no watering today . Tomorrow will be giving nutrition to water again 🤘🤘
Likes
8
Share
@Lickey
Follow
Week 8 is over so 3 more to go approx. see fattening by the day. But bad fungus gnat infestation on the god