Likes
Comments
Share
Likes
9
Share
Debating on cutting Blackstrap on Friday. Not seeing much amber. But lots of cloudy trichomes. But we will see in the next days if any amber will show. Peach Crescendo is frosty. Can't wait to taste it. We will see. Fat bastard just doing her thing. Smelling fruity and gassy. Just giving them water till harvest. Ppm is kinda high on Fat Bastard.
Likes
25
Share
Day 29 01/08/24 Thursday Another feed today using de-chlorinated tap water pH 6, there now taking 300ml every evening. Day 32 04/08/24 Sunday 300ml De-chlorinated tap water pH 6 today again with Plagron PK13-14 and power buds. All plants doing really well! Had an infestation of leaf minors this week, no idea how, but they are treated and I'll check every 48 hrs on progress of pets. All of them have shot up this week 💚 Day 34 06/08/24 Tuesday De-chlorinated tap water pH 6 today with calmag only. Pre flower stretch initiated, pre flower female sex pistils forming 😍 All happy and healthy!
Likes
15
Share
@Sergi0
Follow
Semana tranqui, siguen engordando, las Frisian Dew las voy a tener que cosechar antes me parece, pero voy viendo, ahora tengo menos moscas, pero siguen habiendo varias todavía, los 80 litros se bancan muy bien una semana sin agua (ahora riego una vez por semana).
Likes
6
Share
I cut another part of the girls, and the total is even greater than the first part! We wait another week for the final sums, but right now the flavor is unique.
Likes
8
Share
@AutoCrazy
Follow
This plant is really starting to pack on bud size now. Pistils are still nice and white so she has a long ways to go yet. Dinafem never ceases to amaze. 😎🍿🍻🌱
Processing
Likes
6
Share
@MulzinMo
Follow
4/20 Still having trouble getting seeds to grow! 4 out of 6 seeds from the initial pop have died, so I've popped one more Chemdogging and one more Sour Diesel. Placed the popped seeds directly in the pot they'll stay in for the whole grow per suggestions. Built a 30"x36" trellis out of 3/4" PVC pipe, will install a double trellis netting on it once I set up the Blumat watering system. Also added in a smart power strip that now has built-in timers I can control from my phone. Organized all my extra grow equipment and cleaned up the room! The little pots in the photos are some random seeds I'm starting off in here to give to some friends to grow outdoors. 4/25 - sour diesel popped up today! 5/2 Still no luck getting the Chemdogging to sprout, currently waiting on C-dog and a Blackberry auto to sprout in my other two pots. Set up some random plants from seeds I found in a bag of Black Lime and Cookies, put them in a separate room to flower so I can find out if they're female.
Processing
Likes
18
Share
10/19: This morning when I opened up the closet I wanted to rearrange a little, but they were so packed in, it was almost impossible. So, I went up in the attic and ran some cables and hooked up my other 200w light in the top section. I moved the 4 smallest plants up there and it created a little bit of desperately needed space in the lower section...but I still doubt very seriously that I'll be able to grow all 15 to completion in there..it's only 14.5 square feet of space!😳 10/20: I foliar fed everybody with some SP-90 humic/fulvic acid and kelp me kelp you today. They will probably get fed again tomorrow. Drying out quickly- 10/21: I applied Axiom again today..I sprayed a whole liter of the finest mist I could produce..tops and bottoms of all leaves to the point of runoff. I fixed up a 5 gallon batch of nutes and fed everybody about a 1/4 gallon each. Later the same day.... Several of them look very overwatered..and it's mainly the plants in the back in fabric pots that have seen a grow or two. I think my pots are mainly just too close together for airflow to dry the bottoms out well enough. I put another big fan in the closet and turned off the evap cooler for the night. 10/22: Most of them look better this morning, but a few are still droopy, so I used a stainless steel skewer to poke a thousand little holes in the lower part of all the fabric pots in the garden to try and improve oxygen availability to the roots. I also carefully arranged the garden so that there are gaps between all the pots. I think I'll also space my waterings a little further apart. The topsoil is drying out well enough, but I don't want their roots sitting in muck. 10/23: Several of them are flowering now, and starting to stretch a little bit. I raised the lights about 2 inches today and dialed the ac infinity's high temp trigger up to 88f for a bit to get them to dry out a little faster, so the RH climbed a little higher as well...so I also set the ac infinity's high humidity trigger threshold to 65%. After observing signs of nitrogen toxicity on several of them, I realized that I made another rookie mistake...(where is my head??) The new 5 gallon bucket I'm using to mix a batch of nutes must be about 2 inches shorter than the one I had been using, and I never bothered to calibrate it....which I did today. So, for the past couple of feedings, I've been mixing in enough nutes for 5 gallons, but in only 4 gallons of water!!! I foliar fed them with BoomBoom Spray and gave them about 8oz each of boomerang and cal-mag early in the morning, and by 5pm they all looked happier. I'll give them a little drink of plain water tomorrow, then start them on flowering nutes the next day. 10/24: Several are starting to stretch now...and all but one are flowering. This morning I fed them another little dose of boomerang and cal-mag, and also added some bembe and open sesame to the mix. This afternoon, I foliar fed everybody very thoroughly with some humic/fulvic acid, seaweed extract, yucca extract, and big bloom (for the earthworm castings and minor and trace elements) I repotted the dwarf in a smaller container and gave it to my son. He's a bonsai enthusiast, so it's right up his alley...that's one less plant to deal with! 10/25: This evening I mixed up 5 gallons of pretty much everything except grow big. and gave everybody about 1/4 gallon each. I plan to flush them with sledgehammer on Sunday or Monday and only do foliar feedings like BoomBoom spray and fulvic acid until I resume normal bloom feeding mid-week. Because I've had such a good veg, I'm pretty sure the maximum number of plants I'll be able to fit into the lower section is 13...and maybe only 12. So, that will be my 4 or 5 shortest plants in the area above..in which case, I'll need more light... I think the new UVB light will have to wait until my next grow because I've got so spend a couple hundred bucks on seeds to be able to start another batch right before my current run finishes.😖😞😩😡
Processing
Likes
29
Share
@Reaper
Follow
day 15 (december 19) start of week 3 roots everywhere plant starts to take of now, the hydro is slightly bigger then the soil plant day 17: the hydro plant made a new set of leaves in just 2 days! day 19: i cut off the lowest leaves of both plants. i do this because on any autoflower these leaves produce a stem that wastes a lot of energy on small nugs. day 20: hydro plant got topped (3nodes) day 21: soil plant got topped (3nodes) same strategy with the topping, i do this early (i could pinch them off with my fingers) to reduce the time to recover. the plants bounce back like they didnt feel it and with the lowest leaf and small tiny stems cut off, these plants will produce 6 main stems with nice big and dense buds instead of a huge christmass tree with more leaves than bud.
Likes
5
Share
@Adrrys
Follow
Corte día 91, después de 5 días de lavado de raíz, 2 primeros dias de lavado con flawless finish de advanced nutrients, 50 gramos de flores en húmedo se congelaron y use para hacer bho, el efecto es relajante y fuerte
Likes
18
Share
6plants So good & one genetic error or I don’t know how But I care
Likes
14
Share
@Kendoda
Follow
This week the plants have started to get hungry. The 3 gal pots feel solid with roots and the growth has slowed down, so I’ve made the decision to repot into 7 gal. It’s a little late for it but i still think they’ll benefit from the fresh soil and more root space. Currently feeds are Feed 1 .. grow,bloom,topmax,cal-mag Feed 2 .. bio heaven, acti-Vera Feed 3 .. Alg a mic I also added a watering of fish mix to the master kush and alienz to give them some extra N.
Likes
30
Share
So far these plants have shown nothing but resilience and a will to grow I have put quite a bit of effort in but I’m sure I’m lacking in one or two spots but you would never be able to tell by the Look at the plants they seem quite happy and they are relatively patient with a new grower lol
Likes
144
Share
@roro_204
Follow
I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues
Likes
198
Share
@DevilsBud
Follow
New week for the 2nd grow In the new marshydro set-up Enjoy the video be warned it can get LOUD 😉 there all looking amazing in there own way for separate details per plant go to there diaries 🤘🏻 I believe the new FC-4800 wel i KNOW This lamp is out of this world for sure it will get your so frosty so quick i was afraid i did something wrong lol nah she is just a absolute BEAST . AND THE 120X120X200 TENT Is great for the grow that have going on now there snug like bug in there no netting needed 🤘🏻 the control of heat and humidity is easy as can be winter is my time to grow no problem what so ever visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
10
Share
Esta semana los nutrientes siguen de la misma manera, es notorio el exceso de Nitrogeno por ende se disminuira en los próximos riegos, se realizaron podas apicales en los clones que no les hice anteriormente para que alcanzaran más altura. Dentro de esta semana instalare la malla scrog Kanovi para guiar los vigorosos brotes. Además esta semana ya esta retomando el crecimiento la planta madre variedad Tangie la cual cumplió su ciclo de propagación por esquejes y porfin florecerá. Leo comentarios, opiniones y recomendaciones