The Grow Awards 2026 🏆
Likes
25
Share
week intel: everything is perfect! stresses : just a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 818 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 382 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 250 ppm - 0.5 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : know your plant tolerance limit of E.C stress once you saw the very very little yellowing on tips of leaves , that's the sign to don't go further , never reach that limit if you want a high quality buds, in my case tolerance is 1.8 and i'll reach to that level only once a week to cause precision stress , love your plants and have a happy growing!
Likes
2
Share
Coloqué las semillas en un vaso con agua de osmosis durante 2 días. Al segundo día empezaron a reventar y se les empezó a formar la raíz.
Likes
26
Share
@Hawkbo
Follow
Soaked 7.27 for 36ishhrs, into paper towel for 12 hrs then into a solo cup with greentree garden supply pro ultra (coco/perlite). No plan on veg time I dont know when I'll have an open tent for flower but it could be a very quick veg kinda pheno hunt deal. First feed was a diluted leftover feed from my auto youngins. Basically about 1 ml/g of grow, 7ml/g humid acid, 1ml/g more roots, 1ml/g orca, cannazyme, hydroguard and a sprinkle of living organics in the nutes and on the top of the coco. Usually the ppm will be higher than I want it so I just dilute with r/o water until I'm down to 200-250. It makes it so I cant be accurate on ratios so that's why I'm tellin ya, but it's how I always do it no matter what nutes I use.
Processing
Likes
30
Share
@Canadian
Follow
I use all 3 General hydroponic nutrients and they are two different pot sizes the Moby Dick is in 30 liter and the blue amnesia is in 18 liters has a very strong odor and blue amnesia is maturing at a faster rate then the Moby Dick. a scrog net is being used in order to give support to the upcoming buds. I am also actually on week 4 I just made a mistake calculating the week. this is my first grow ever. also I'm not sure if using the scroll net it's a good idea for support rather than tying those branches up . I am watering every two days feeding nutes every single time at 900 to 1000 PPM ph at 6.2 the plans have not show any signs of stress but I am worried if it is too much nutrients the plant seems to grow very fast after every watering and seems to be loving it. the blue Amnesia XXL Auto it's growing in soil with 30% Coco and the Moby Dick XXL auto it's growing in hydroponic soil. the seeds were germinated on jiffy's and 100% germination rate plus the genetics seems to me very resilient to heat and everything else including lots of nutrients. the moby Dick XXL auto are the two in the front closest to the camera the two farthest to the back of the tent are the two blue amnesiaXXL auto. today day 31 i did some pruning actually lots of pruning hopefully don't cause stress to the plants or even worse cause them not to bud that nicely regardless the scrog net seems to be working just fine helping them access more light and making it easy for cutting leaves that are no longer needed. 32 yesterday after watering and sleeping today they have show no signs of stress in fact they starting to stretch in the buds that we're not getting sufficient light have start to grow also yesterday from the 16 liters I prepare instead of 3 ml of grow formula I add 6 1/2 to compensate for stress and the need of healing and having new grow stretch. also temperature has dropped dramatically outside making my house cold down from 24 degrees C to 19° at night internal temperature is remaining the same from 30 to 26 C. Day 33 I have been raising the scrog net every day and the light everyday this plant is growing very fast I also notice that where the fan is hitting all the time that plant is bigger I have been moving the fan to other sections of the grow tent to see if any reaction happens and it looks like it makes the plant grow faster . I will not be moving the Scrog net any higher Rather I will introduce another one once they require more support . Day34 notice some of the top leaves are showing a curving down like over-watering without actually over water I think they're showing signs of too much nitrogen .for the next water session I will hold back on nitrogen until I see signs of a fully recovering meaning leafs pointing up. thank you for reading have a happy grow.
Likes
124
Share
📆 Week 12, 7-12 July 2024 Harvest 8 July - Turned light power down to 25%. Changed nutrient solution to RO water to begin flush. 11 July - Harvest 12 July - Begin curing time. 📑 Harvest time! She is ripe, danky, sticky, full of resin, solid, and I am pleasently suprised at the yield. This is not your ordinary Auto Afghan variety. She produces heavy buds and a lot of them. This is also the first auto I have grown using DWC in 12 weeks without manipulation - 18 hours straight from start to finish. I pushed her to the limit. Now she will hang in the closet at 50-55% RH and 70 degrees F, for about 7-10 days curing. Then she will trimmed and put into one quart glass mason jars, with 62% Boveda TurpShield and burped until 62% RH is maintained. The full potency potential and terp profile will be reached in about 30-45 days. 📆 19 July 2024 The Smoq Report: After 7 days of hanging, she was ready to cut. I trim and shape each individual bud, removing unwanted leaf and stem. It’s a process but worth it if you smoke bud. Her potency is evident. It will take the experienced smoker to a satisfying high and keep you there for a good hour or more before you want another hit. The smell and taste is of a typical Afghan. I was expecting a heavier yield, but in the end I guess we all hope for a little more! Maybe next grow! 🍶 Nutrient solution changed to RO water 💧 Using reverse osmosis water with EC/TDS at 0 🔆 Light power at 25%, DLI 20 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this grow. Thanks for following, reading and stopping by.
Likes
69
Share
@TOTEM
Follow
That’s impressive. This strain is amazing. Couldn’t be happier. Will keep going with this nutrient schedule until the two Royal Highness grow a bit more. I should do some LST asap because there are lot of hidden and trapped leaves under the bigger ones. Update: Did some LST to uncover the hidden leaves. I’m just a bit scared about how big she will get after this.
Likes
13
Share
17/09 se riega con power roots, Pure zym, sugar royal, cal mag y solo tek bloom EC: 1.8 PH:6.3 20/09 se riega con big one + Bio enhancer, mitad de dosis de cada uno para probar, ambos estimulantes. Se realiza defoliación de bajos
Likes
4
Share
Here it is the mango skunk the (male) now i can start breaking with diffrent plants and try and make some new strains just got 2 more plants to wait for and see if they are male
Likes
3
Share
1st grow in 10 years so wish me luck or let's just call it a practice run 👍
Likes
4
Share
@Anon73
Follow
Had a massive rainstorm, hadn’t supported the plants as I had planned due to spraying for moth larvae. The storm damaged several plants. I strapped most of them back together with Zip ties and stakes. They recovered nicely. Some branches were not recoverable so they were trimmed and dried. No more nutrients, just water to finish off.
Likes
35
Share
@Rangaku
Follow
Ended up being a pretty successful grow , had a few challenges with summer temps but after switching from HID lights to LED lights mid flower ( which was stressful at the time ) the girls didn’t miss a beat . They aren’t dry completely yet after hanging for 10 days maybe another 3 or 4 days and I’ll know dry weight etc … that total decreases every day tho , can’t help but throwing a handful of bud on the dehumidifier every morning.
Likes
10
Share
6/24/25 the smell is intoxicating. just for the taste and smell of this plant, it is so worth it. Keep in mind this is a legit cutting and not from seed. clones are so worth it if you get the right
Likes
3
Share
@KcKush
Follow
*Will be topping them to find out Sex in straight 12/12 cloner hopefully we get more females than males. * Will update journal later *Ignore everything untill tomorrow *So I cut them and put them straight into 12/12 the clones that is to show me Sex. *You could see the hollow hole in the stem I wonder if that’s gonna cause an issue.
Likes
7
Share
@Maddiq
Follow
I’ve redeemed myself for the lack of photos last week!! These girls are caking up absolutely incredible. I hope harvest is only a few weeks out now, but I don’t see a lot of milky tricimes yet, and no ambers in sight at all. I took off a few low side branches to dry, and see how they go. Smell is amazing. Very sweet of sorts. Very hard to describe. Definitely got a lot of gas too.
Likes
5
Share
Bonsoir les amis, Je suis toujours aussi content et Émerveillé devant mes Fifilles elles grandissent tout les jours j'ai vraiment hâte qu'elles arrivent à terme en espérant qu'elles seront magnifiques. J'ai perdu deux petites fifilles c'était les plus petites (5cm) de haut. Je pense que c'est quand je les est rempoté j'ai dû cassé la tige 😑. Bonne soirée à tous 😉👍👍👍
Likes
20
Share
Took a while per photoperiod plants as a whole. My first grow for photoperiod but I'm impressed. Did well, very stretchy. I smoked some that I broke off 2 weeks ago today also and I loved it. The taste, and the effect is spot on what I like. Super light high, just nice smell and smoke. I would like to find a plant like this 25:1 cbd/thc but as an autoflower. Can't find any online unfortunately. 1.1oz from my first photoperiod. I'm happy! 😍😍😍
Likes
5
Share
I left them in LED for a few days before harvest so i could bring out some of the colours. 10/10 smoke :)