Likes
Comments
Share
Had alot of fun this season!Only 5g got moldy, but it took heavy rain and bad weather for 5-6 days in row. Bud smells super fruity and exotic
Likes
5
Share
@Cukito
Follow
Just starting to smell really sweet!! The plant is doing perfectly and I hope it will have at least 8 main colas full of buds!!
Likes
56
Share
Granddaddy plant in week 6 of flowering. She is in full bloom. Bugs Issue: There are some old caterpillar holes on leaves but I think bugs situation improved. The smell from plant dropped last week after first round of insecticide spray. Smell is like plant crying out in pain after being attack by bugs. I sprayed spinetoram one more time in the beginning of the week. Late in the week, I used a USB microscope to check. And there was a Protoss tank patrolling a leaf on plant 2. On the bigger plant, I just saw carcass of dead mites strewn around. Prepping plant 2 for an early harvest. I am always happy on harvest day. Trim her and let the pot dry out for a couple of days. And plan to spray my garden with third and last round of spinetoram. Next week, I am going back to microbes. Plant 1 is doing fine. She is bigger and handles pests better. Her flowering cola’s also smell nicer. Plant 1 phenotypes is much better than plant 2. And I removed some leaves. This past week, I fed both plants with half strength potassium based orchid fertilizer. Plant 2 shows slight tip burn. So, this is the feeding limit. Plant 1 leaves are nice and green. A few leave started to yellow but I am not bothered by that issue at late flowering stage. Next week I’ll just give plant 1 a dose of yogurt and start pre-harvest preparations. Trimming, flushing, and all that. Transplanted a clone to 25-liters basket. She started to put our pistil. This is one issue with Mycorrhiza. It over stimulate the root. And root tips put our too much cytokinin that signals flowering.
Likes
Comments
Share
Likes
3
Share
@Mimbra
Follow
Bueno ahí van arrastrando la defizcencia de potasio ya veremos a ver qué sale
Likes
16
Share
Tag 21- Beginn der 4 Woche. Die Vorblüte ist schon gut sichtbar. Vereinzelt zeigen sich überall erste Stigmen. Die einzelnen nach unten gerichteten Blattspitzen werde ich die nächsten Tage genauer beobachten. Obwohl auf Trockenphasen geachtet wird, werde ich diese Woche die Wasserzufuhr minimieren und die erste Blüte Düngung voraussichtlich um paar Tage verschieben müssen. An Tag 16 der letzten Woche wurde die Pflanze gedüngt. Der Basis Dünger Sensi Grow von Advanced Nutriens wurde dabei um 0,5ml erhöht. Nährstofflösung: 1 ml/l - B-52 Advanced Nutrients. 1 ml/l - Voodoo Juice Advanced Nutrients. 1 ml/l - pH Perfect Sensi Grow Part A 1 ml/l - pH Perfect Sensi Grow Part B
Likes
11
Share
The vigorous branches and typical sativa structure are now embracing the Overdrive effect. In this sixth week, the buds are slowly expanding, in sync with a terpene profile that promises pure tropicality. ✅ The feeding cycle strictly follows the AN Master Recipe, while watering has been increased to 3 cycles/day via drip kit, optimizing distribution in deep substrates. 💡 Full spectrum with: FD9600 at maximum power Mars Hydro 100W to favor the lower body 🌬️ The dehumidifier will be activated on Friday evening, without connection to the Inkbird, but will operate automatically at the target humidity to keep the VPD under control.
Likes
92
Share
Day 60....I've set them free from LST and I'm gonna give them plain water tomorrow..can't wait this last 2 weeks to go. As it is my first grow, i am already happy by getting closer and closer to harvest...can't really wait for the cure and the final results.
Likes
22
Share
@BlumenBot
Follow
3/28 - I moved her up to the flower chamber to give her more space to grow height. I think 1 week in here with veg schedule and then I can flip over to flower. I will be removing some shoots crowding things up and probably a good deal of fan leaf cleanup as well She got watered, I think moving here up made her jump back to life 3/30 - flush feed 4/1 - flush feed
Processing
Likes
7
Share
Hello everyone, Been busy this week working around the house so not much I can say. Heres a little video of there growing... See you guys next week
Likes
4
Share
Processing
Likes
1
Share
Likes
68
Share
I gave the lady's a litle haircut at the start of the week, and started using Bud ignitor on the Canna feed Cherry's to speed things up a bit😉 I also Switched the lady's to 12/12 on the 10th of november. Rock on Growmies 🌱
Likes
6
Share
Hi guys, Hope you are all doing well in these difficult times the upside is you can spend more time on this amazing hobby of ours. Another week has passed and i have a few updates we are still growing on a 24 light schedule and im thinking about switching to 18-6 for the following week-week and a half of veg fase, The growth is good but they are not very thirsty which concerns me a little but we will see what will happen. 3 of the plants have a little defect which shows it self in weird looking leaves and stunned growth don't know what is up with that but we will also see what the future brings, experience tells me that although the plant may look a little retarted that does not mean that these will not grow to be amazing plants with a big harvest very curious to see how they are going to develop further down the road. I stopped giving the Hy-pro Terra i love the company and their products but there is something with the Terra line that does not make me happy although it's very easy to use just one component as a base and a few optional additives it doens't give me the results i expect so i made the switch to Hy-pro Hydro Part A+B and within a day or 3 the plants have a fuller green color and the development of the plant overall is very noticeable and the stem is getting steurdier and thicker. As for the lights they are still hanging on the same height as i started and i gave it a little more power the plants are stretching towards the light just like i wanted and when i made the switch to 12-12 i will gradually move the light lower untill it's about 30-35 cm above tha canopy and i may or may not take out met scrog netting i haven't decided yet. That is all for this week Hope you all are doing good stay healty and keep it green Cheers, Nibameca
Likes
5
Share
@Bluemels
Follow
Tag 68: Noch eine Woche bis zur Ernte. Zum Glück. Die Blätter sehen auch echt nicht mehr gut aus. Vermutlich war ich beim ph wert einstellen noch zur vorsichtig, und er war noch etwas zu hoch?!? Ich traue mich immer nicht soviel von Säure zum senken rein zu machen 😬
Likes
40
Share
@Tazard
Follow
I could tell within a week of flower that she would probably be a monster. She was always given priority for space and light. When I realized that she was covering 7sqft I realized that she didn’t have enough light and I moved 3 more LED’s to her so as to not be light limited for harvest. Based on 600g/m2 I needed at least 400w for her. I managed to get almost 670g/m2!
Likes
17
Share
@Kirsten
Follow
19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. Thanks for checking out my diary 🍃 ✌️
Likes
26
Share
@valiotoro
Follow
Sweet, smooth terps and heavy, chunky buds. 🤤🤤🤤
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.