Growing

Some Faded bottom leaves . Temps are lower . Not sure if my questions are seen but moving forward with my first Auto Blow Dream grow.

Chopped her wet trimmed her now waiting till it dries lil nugs that I cut off to dry faster to get a taste and effect test she smokes beautifully ands she tastes like mango

2 week flower my girls Do it amazing Nothing wrong whit the they Grow literally Perfect I'm Really Excited

1/11/2025 17:10 11.4°C 70%RH It's fucking cold outside,at least last days were sunny but every sunrise was so foggy until 8:00 when the sun Is high enough to make everything visible This means i cannot grow weed outside anymore,the more days i wait the more bud rot i find Plants still looks pretty good especially Coco fresh,i only found a flower that looked weird and i found out a very little tiny piece of mold Video #1 Coco Milk 105 days from seed Last video before harvest ,the smell is crazy but sadly i found some mold I will post more details in the harvest section Video #2 Coco fresh 93 days from seed This one Is getting heavy and looks like she loves cold climate,rippening very fast and smelling strong Not strong like her sister but more cali terps,runtz lineage coming out more as we are near the end Trichomes are now whitening with less than 5% of amber and a lot of trasparent ones Probably this plant will start molding with foggy days like this but i will wait until some more amber decide to appear Next time the very end of this guerrilla grow journey,maybe 6 or 7 november which Is a lot later than i ecpected

May 4th - Day 84 : The babies are doing great. They're drinking good. I'm just thinking one tent might be too small for two plants as the main one is pressing the second one against the walls. Starting to keep an eye open on one of them that I think might be ready. I'm not saying which one, want to do a proper reveal aha.

In week 10 I have some plants, which have grown taller than the rest (canopy is appr. 80 cm high now). In order to not have to raise my lamp, I rather correct their height by 'supercropping' them. Supercropping is a technique developed by SOMA from SOMA_seeds and works VERY WELL. Instead of topping your plants (=cutting off the main stem) it is better to take the main stem between your fingers (appr. 15-20 cm form the top) and brake the fibers inside and then bend it downwords. This way the stem will stay intact and heal itself and you dont loose the main buds growing on it later. In the video above I show and explain how I supercrop a plant. The plants are now getting more and more into flowering and therefore I switch the dimmer on my SANlight EVO4-120 plants to 100% now (see in video above). The BIO NOVA nutrients are increased as well a little bit, so the plants can build big buds.

Coming to the end of week 2 more photos to up loaded!! New lighting system ended up getting 2 3500k and 2 6500k cobs . Can tell my plants are already loving them fastest growth rate I've seen since my first grow !! Gg4 and 3 are looking fucking amazing 7 outta 8 in solo cups looking good Caramella never cracked kinda pissed but it's whatever ! I have one forgotten cookie by metophstic limited edition soaking so let's see :) . Temps between 77 n 85v Humidity 70 80% 24 hours on Water every 5 to 7 days using a one gal Solo cups get small amounts So far so good :)! Further along updated at the start of week 3.

12/30: 2ème semaine de flo. En 12/12, des pistils commencent à apparaître photo dans la prochaine mise à jour. 01/02/22: la floraison à démarrer pour de bon. Maintenant vous falloir lui donner toute l'attention et l'amour possible pour avoir un bon produit et une bonne récolte 😆🙄😎😀🐢🐢🐢🐢🌱🌲

Dear diary, Week 3 done! Was away for the end of the week so hence why there are not as many photos this week, but my flatmate was keeping up with the feeding during my absence. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀 ⏰ Day 18: Gave another foliar of calmag, and gave a watering of calmag water at 1.35ms 6.3ph and backed off a bit on the light to 290ppfd as I’m seeing some signs of light stress. I also later feed nutes at 1.35ms 5.8ph. ⏰ Day 19: I am seeing some more “burning” on the new growth tips so I feel happy about the choice to back off on the EC and lights. A feeding was given at 1.35ms 5.5ph and light lowered a bit more to 250ppfd. ⏰ Day 20: The regular feeding was dropped again slightly to 1.26ms and 5.6ph and light increased to 270 ppfd. ⏰ Day 21: Feeding given of 1.26ms 5.6ph. All of them look fairly okey, but W.C #1 undergrowth is slower than the rest but raised lights to 52cm and set ppfd to 300-305. ⏰ Day 22: Away from home so the flatmate is feeding them from the premixed bucket. ⏰ Day 23: Away from home so the flatmate is feeding them from the premixed bucket. ⏰ Day 24: Away from home so the flatmate is feeding them from the premixed bucket.

Hi ... It's been a crazy week and it switched to 12/12 on the 40th day of vegetation.🍃🍃🍃 They are ready for sure there is no more to wait ... 🍃🍃🍃Good luck girls during the flowering stage🍃🍃🍃

Booming and blooming. One pheno is about 25" tall, and the other is over 3' tall. Not a ton of odor yet, but I continue to be very impressed by the growth rate of these Pride of the Lion genetics. Sprayed CannControl on Wednesday as a preventive measure. Aphids are strong in the brussels sprouts right now.

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

👉The time finally arrived for the harvest, mostly cloudy trichomes with scant few amber, very few white pistols, and the leaves had either faded or were fading. The run-off pH would quickly plummet and the run-off EC would spike. This may be an indicator that the plant is ready but that only would be conjecture on my part. The overall look of the plant to me said it was ready. The aroma was super strong citrusy and intoxicating. THe leaves were fading and there were virtually no white pistols. 👉I harvested bottom to top. I hung each cola on alphabetized clothes pins with gardening wire attached for hanging on the rack. The buds are dense and shaped like pine cones. I trimmed it semi-tight, but left some of the smaller frosty sugar leaves. The buds and sugar leaves are very frosty but it wasn’t as scissor freezing as the Gorrila Glue I grew last year. I measured the post trim wet weight on a self-calibrating digital scale. I checked the accuracy of the scale with a set of scale calibration weights and it was accurate at all weight ranges. I logged each colas trimmed wet weight and hung on the rack. I have a 42” tower fan. For first 12 hours I ran it at its medium setting, then reduced to lowest speed. I rotated the side facing the fan after 24hrs. Then after another 24 hrs I placed them in paper sacks with to top open. I left the buds on the clothes pin hanger and clipped the bag to that. After another 24 hours I closed the tops. Another 24 hrs and I test weighed a couple of colas. I monitored for another couple of days until the weights averaged 20-25% reduced from the initial wet weight. I then cataloged the weight of each cola and placed each into its own jar, most got one of those small cheap hygrometers. These hygrometers have been calibration tested and I know the drift of each. My target humidity is 62%. I would open the jars for brief periods of time during the next couple of days until the humidity stabilized at 62%. Once stable I placed 62% humidity packs in the jars. I took out most of the hygrometers for the next plants cure, but leave some of them with the best buds. The Queen cola was 20g when placed in the jar. That is about 24% remaining weight from trim. 24% is a little on the high side of the humidity target range. The jar the Queen cola is in, is a wide mouth counter jar and I will be toking that bud primarily and it will dry out the fastest. I have compensated the weight I entered on the dry weight spec to reflect about 20g more of humidity loss and another 30 for the stems that are left on the bigger buds. The final weight of the buds going into the jars was 254g (not including the larf at 23gdry). 200g of plump sticky pine cones for the final weight is pretty nice for a 1 gallon pot. 👉I wrote this review at 3 weeks before the 6 week cure mark. In my short experience of being weed rich, its been interesting to take note of how the flower continues to ‘cure’ as time goes on. I have found that 6 weeks isn’t a given for when its ‘cured’. I have observed that as weed ages it changes. I have not noticed much difference with 2-3 week old buds at 62% humidity when compared to 6 weeks from jarring. But I do notice significant difference around 6 months of age. The flavor is enhanced and the buzz is stronger. It maintains this level then 8-12 months it has leveled off and all strains are becoming more ‘couch lock’ inducing. My observations are not scientific by any means. This is just my 8th plant in the 2 years that cannabis became legal for home grow in my area. But I still have each of the plants and rotate which one I consume. 👉I loved growing this plant, and hopefully gained more knowledge. It fox-tailed a bit at the end. I think my frequent fertigation techniques contributed to most of the issues I had. I think I was a little too conservative with nutrient mix and irrigation volume and frequency. I used only 10% expanded clay pebbles in the coco mix as opposed to the standard 30%. This was slightly problematic at first before the roots filled the pot. Fertigation events would cause erosion and caution had to be taken around the seedling. I placed a layer of hyrdoton pebbles across the surface and the issue was solved. Once the pot was filled with roots it took 10+ minutes to give the plant 2L of solution. The pot was packed hard with roots. This may have been a contributing factor to some of the possible nutrient issues I had. I dont think the nutrient issues I saw had much impact on the final outcome. To get 200g from a 1 gallon pot is wonderful.

This week has been wild. I had to cut the sides of the greenhouse as the plants had it bursting at the seams. These girls are all flowering beautifully and starting to frost up. Happy Growing.

Allora....quinta settimana di vegetativa alcune piante mostrano dei segni di carenza date dal fatto che non c'erano i nutrimenti corretti, adesso che finalmente ho tutti i nutrimenti Giusti in teoria questi problemi dovrebbero scomparire, nelle prossime settimane vedremo come si evolverà la situazione, questa settimana le travaserò nel vaso finale poi farò ancora un paio di settimane di vegetativa e quando saranno pronte le metterò in fioritura.

it wasnt a hard grow at all the organic nutes i have make it just that simple just add water and also i look for a sturdy genetic and roll with it but i can say the overall grow on all the strains in that area would have made it a real nice hues of different colors and just the 14 weeks i was on that journey it was nice and easy

These are most of the last pictures I have of this harvest