6/19/2024 These are going to be My next run. Excited Transplanted into 1 gal and added (too) much myko powder. 6/23 she completely drooped and is showing signs of stress or shock. 6/25bent her in half. She was starting to harden off(up?) But I wasn't sure what I wanted to do with her yet. I knew I was going to train or top or something. She wouldn't become much more than a single cola and a handful of buds(I assume). Either way I can shape her up as we go. 🙈🙉🙊 6/24/24 applied veg nutes. Terp tea grow 711. A single tsp or 5 ml per gallon of substrate. I need to remember to add uprising foundation as well

Umas estão indo melhores que outras mas havemos de ver o que saíra daqui.

.

2/2 We are about half way on the 2 biggest, 3 weeks on the SG, and about 6 weeks on the Blue cheese. Damn... You can see how much I lose on the bottom half, but like I said before. It will still be more than I can smoke. And I want to make sure it all gets enough light to ripen and allow plenty of airflow. The only issues in really having is the godberry seems to be yellow 8ng too soon, but I still think it's from the light stress early on. She also looks a bit like nute burn. Probably the fish emulsion I gave it 2 weeks ago when I misread the light stress. I always have at least one plant that goes yellow too soon. Living soil. More to come...

Started adding molasses to the feeding solution on day 56, 26d into flowering light cycle. The plant that I LST is LOADED with colas. The one I left to grow naturally doesn’t have nearly as many colas. I’ll be using LST in the future for all of my grows just based on this side by side comparison. The Earthboxes are doing really well. These girls haven’t really had any issues.

Buds are starting to get really fat on 3 of the 4 plants. No amber on the trichomes yet so it will be a few more weeks till harvest at a minimum. The one that did the most stretching is just starting to thicken up on the buds. Been having issues with my drainage system causing a bit flooding in my tent. I see a few signs of deficiencies on one of the plants but I can't properly have access to it to see what is going on. The 4x4 tent has proven to be just too small for these thicc ladies. After this grow I'll be getting a much bigger tent. Any recommendations?

This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 27.09.25 VW22 – Fed 3l of #1 → 2l runoff 28.09.25 VW23 – Fed 3l of #1 → 2l runoff 29.09.25 VW23 – Fed 3l of #1 → 2l runoff 30.09.25 VW23 – Fed 3l of #1 → 2l runoff 01.10.25 VW23 – Fed 3l of #1 → 2l runoff 02.10.25 VW23 – Fed 3l of #1 → 2l runoff 03.10.25 VW23 – Fed 3l of #1 → 2l runoff 04.10.25 VW23 – Fed 3l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new fish batch): 30 ml = 1.00 ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL : = 160 ml per 30L = 5.33 ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done

Aloha Freunde der Sonne 😊 Heute wurde das letzte Mal so richtig entlaubt. Nicht ganz Lollipop aber für mich reicht das vorerst. Ich muss klar sagen das ich noch nie so einen schönen Geruch in der Nase hatte. Ich freue mich auf die Ernte. Viel Spaß 🙏

Wedding Cake is almost ready but unfortunately both Cookies Kush need a lil bit more time. I guess we good to go in 2 Weeks from now on. 💚

Yea she looks beautiful can’t wait to see her flowers nice shape goin on! 🌸💕

Very very happy with this strain, adapting well to LST, starting to smell good 😜

day 1 Jan19 12am initial Seed Drop 40 cell seed tray and dome 99rH seed 1 75F (1hr post drop) seed 2 77 (1hr post drop) JAN 20 day 2 Seed A: Taproot ~2pm // Seed B: Taproot ~11pm JAN 21 Day 3 22Day 4 failed restarted no Taproot penetration through root plugs and no sprouting from plugs 23Day 5 try 1 fail start germ try 2 24Day 6 25Day 7 **germination reset** -solo cups and direct into soil day 1 jan 23 1 gmo cookie 3 purple urkle day2-day3 Jan24-jan25 74F 62rH lost 1x purpleurkle day 4 Jan26 74F 62rH day5 jan27 74F 62rH gmo Seed sprout cotyledon leaves with true leaves form and emergence urkle #1 stem sprout still shell no cotyledon or trues urkle#2 waiting Taproot in soil waiting for vertical push a day6 jan 28 seed A seedling day 2 and Seed B seedling day 1 days Jan 29 seed#3 cut never emerged from soil **SEEDLING** jan27 gmoCookie seedling day1await purpleUrkle coytledon leaves& shell shed jan 28 gmoCookie seedling day2 purpleUrkle day 1 seedling cotyledon and shell shed 8pm ct jan29 gmoCookie seed 1⅝inch 25mL 6.6ph water purpleUrkle seed1⅛in 10mL 6.6pH water jan30 jan31 feb1 feb2 feb3 feb4 feb5 feb6 feb7 feb8 feb9 feb10 feb11 feb12

Weekly update on these big girls. I decided to take out some of the lower branches, giving more airflow at the top of the pot level. Overall they've exploded with growth this week. I'd say they're getting close to 4ft tall. I sprayed some BT spray for ipm this week since I don't want catapillers showing up unannounced. All in all Happy Growing.

Gracias al equipo de Royal Queen Seeds, en especial a @james, Marshydro y XpertNutrients y sin ellos esto no seria posible. 💐🍁 Gelato #44: Los criadores de Tyson 2.0 criaron Gelato 44 a partir de cepas finas. Al cruzar la Sunset Sherbet y la Thin Mint Girl Scout Cookies, crearon un híbrido de dominancia índica que asesta fuertes golpes en el cuerpo y la cabeza. Su contenido de THC del 22% crea sinergia con terpenos colocantes para ablandar los músculos Mantenla hidratada y con una dieta constante y pasará por la fase de floración en unas ocho semanas. Las plantas de interior alcanzan una altura máxima de 120 cm y producen 400-450 g/m², mientras que sus homólogas de exterior alcanzan los 180 cm y producen hasta 600 g por planta. 🚀 Consigue aqui tus semillas: https://www.royalqueenseeds.es/rqs-semillas-cannabis-tyson/663-gelato-44.html 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 5: Debido al frio 21/22 °C durante el dia la floración es algo lenta, con la ventaja de que seguramente no vea ninguna cola de zorro. Practico defoliación para una mejor penetración de la luz y bajar la humedad. Las plantas se comen todos los nutrientes y comienzan a formar unas lindas flores, mantengo una semana la dosis de nutrientes en algunas plantas hasta ver bien formados los erizos. Potencia del foco 85%.

January 26, 2021 (Week 3, Day 22): Today ended up being an unexpectedly big day. This morning when I checked on the plants, they'd grown another 1.5" over the last 24 hours. They're basically growing out of control at this point. Every plant had a fully developed sixth node that was beginning to unfurl. So I decided to water the plants with 1000ml + 4ml pH Perfect Bloom + 4ml pH Perfect Grow + 1.5ml Cal-Mag Plus + 5 drops of pH down (6.5 pH solution). After that I took the plants out from the tent and began the topping process. I was pretty nervous about getting the snip in the right spot, but I think I've done it correctly. I topped each plant at the third node, then I cleaned all the growth below the node. After that I used rubber-coated garden wire to tie the growth sites to the fan leaves to promote lateral growth. Unknown 2 is definitely the runt of the group and my manipulation of the plant really pissed it off and it started to go kind of limp, so I decided to add a little extra support to the plant until it gets a bit hardier. I think it will take several days for it to recover from this process. The other plants however seem very strong and took the topping like a couple of champions. Gelato 1 and Unknown 1 seem to have great genetics and they haven't skipped a beat since germination. I decided to ditch Unknown 2's top but took clones of the other two plants. This process is flying by so far. Fingers crossed the plants continue to thrive even after my butchering. I've adjusted the humidity in the tent so were now averaging 65% rH and 77℉. Hopefully no other news today! January 27, 2021 (Week 3, Day 23): 24-hours post-top and all the plants have perked back up and I am already seeing growth from the two nodes I left on each plant. I added simple binder clips to the outside of my pot and redid the training on Unknown 2. Since topping, Unknown 2 went from pissed off to happier than ever. However, I have finally run into my first problem. The leaves on all three plants are starting to blotch. I touched one of the blotchy spots and it was crisp and began to crack. Soil is still moist from the watering yesterday. Other than irregular spots, I can't seem to find anything else wrong with the plants. I have a Vivosun pH meter which I've heard can be junk - so I am kind of suspecting my pH is too low. But I'm going to post up a grow question today to get a couple of other opinions. Plants still seem really healthy even with these blotchy patches on their leaves. Averaging 65% rH and 78℉. *Update: The damage on the leaves of the plants started to progress - so instead of waiting around watching my plants get crunchy, I decided to take action. I just flushed all three plants with 4 liters (1 gallon) each of filtered water pH'd to ~6.0. I am getting runoff of around ~6.5-6.6 which tells me the soil is too basic or alkaline. I had read this soil I am using is acidic, so I was feeding with a ~6.5pH solution. From now on I will feed with a ~6.0pH solution instead in an attempt to avoid these pH fluctuations. Before flushing with pH'd water, I tested the soil and all were sitting around ~7.1-7.2 pH. Obviously too high. Got tons of runoff by flushing. Here's to hoping we'll see a difference in leaf texture and color in the next 24-48 hours. This pH problem reared its head at an ugly time since I just decided to top the plants. I think I'll be sure to water with 10-20% runoff from now on so I can keep an eye on the pH regularly. January 28, 2021 (Week 3, Day 24): The last 24 hours were a little scary. As a new grower I wasn't really sure what to expect, and this was my first major challenge. All three plants are now scarred on the main fan leaves due to my inexperience. Gelato 1 looks like it took the worst of it. After flushing yesterday I noticed the progression of the leaf damage stopped almost immediately. Then the leaves began to fill in the crunchy green spots with bright orange around the edges with brown in the middle. It was really strange to watch. The leaves on all the plants are supple, they're just striped with ugly orange and brown scars. It also seems like even with the problems, the plants are continuing to thrive and grow at a surprising rate. Even with the fluctuation in pH and the flush I didn't see drooping from any of the plants. So they seem healthy despite their appearance. In fact, Unknown 1's fan leaves are so happy I've had to pin them down as I was getting too much vertical growth from the cola tips. I think I may have flushed at just the right time. I've never seen something progress on a plant so quickly before. The new growth on the plants seems perfectly healthy without any mottling or spotting. The second node of each growth tip on each plant is starting to unfurl already. All the stems are fattening up as well. It was the first night of 20/4 lighting schedule. Temperature dipped to 70℉ with the light off, but the humidity stayed constant. Average of 65% rH and 75℉. Hopefully we'll continue to see good progress with the new growth over the next several days. Once I top the second set of growth tips I'll most likely clip these ugly fan leaves so they'll stop taunting my inexperience every time I open my tent. 💀 January 29, 2021 (Week 3, Day 25): Seems like the plants are back to growing extremely fast. The scars are getting brighter and the brown parts in the middle have went from crispy to semi-supple. The new growth is bright green and even in color. I had to retrain every plant this morning to keep vertical growth from the growth sites tied against the fan leaf stem. I had to use a second set of ties to tie the second node down. So far my training seems to be working. All plants are working on their third nodes on both growth stems. I'll top once the fourth node begins to develop. The medium is still very moist from the flush two days ago. I don't anticipate having to water for two or three more days. I want the medium to dry out almost completely before I water again. I'll continue with light nutrients - but I'll make sure to run my pH down to 6.0 and I'll also be upping the feedings to 2.5-3l per plant to attain some testable runoff. My new Aperta pH meter showed up yesterday, so I hope to have more accurate readings going forward. Averaging 65% rH and 76℉. Nothing else for today. January 30, 2021 (Week 3, Day 26): Growth sites are stretching nicely along the fan leaf stem. Retrained in a few areas. Noticing slight blotching on Unknown 1's growth. Also seems very dark green with slight burn and dropping at the tips. Conducted soil slurry test and came back around ~6.8 pH. I am suspecting slight nitrogen excess. PPM was very high for this stage at around 1200. Next watering I will skip nutrients as I think the roots are beginning to expand through the pots extensively and may have access to too much nitrogen. Growth is still looking nice and fast. Plants are stretching a bit more with the 4 hours of darkness per night. Averaging 65% rH and 76℉. January 31, 2021 (Week 3, Day 27): The nodes on the main stem of every plant are beginning to swell considerably. Growth sites on all three plants are beginning to unfurl their third node. The nutrient burn on Unknown 1 isn't getting any better, but it also doesn't seem to be progressing. I'm hoping it's just a very slight excess, as it doesn't appear to be slowing down growth or causing any major issues. Gelato 1 and Unknown 2 are thriving and new growth looks perfect. I think the genetics on Unknown 1 may be a little more sensitive to nutrients. Unfortunately since I don't know what the plants are, it has made researching strain tips kind of difficult, so I've been treating every plant the same. The Gelato seems the healthiest of the three plants and is growing vigorously. Because of the training it's starting to look like a salad. I'll go for vertical growth after I perform the second topping. I don't plan on having these plants any taller than about 3 feet, so I anticipate having to switch to flower around week 6 or 7. If the growth keeps up, maybe even sooner. I retrained all the plants today and pinned down Unknown 1's fan leaves to encourage horizontal growth. The cola stems are getting huge and I was able to take off my first set of training braces. I also switched Unknown 1 and Unknown 2 in the tent to promote even growth. Medium is still moist from the flush several days ago. I'll water in a day or two. Averaging 65% rH and 75℉. February 1, 2021 (Week 3, Day 28): Medium was pretty dry this morning. Watered 6.0 pH 2 liters per plant with 2.5ml/l Cal-Mag + pH Down and without other nutrients. I think I'll hold off until flower to give nutrients to the plant again. I was getting very high PPM readouts during my flush, so I think the plants have plenty of food to get through the next three weeks. Just giving a small Cal-Mag supplement each feeding. Got about 10% runoff per plant. Runoff sitting around ~6.7-6.8 pH. Still pretty high, but I am hoping continually watering with a 6.0 pH solution will slowly lower the pH of the root-zone. Plants are growing quickly and I had to pin down the third node on each stem today. All of them are looking more like a salad every day. Fourth node is almost completely out - I'll wait for it to unfurl and top either tomorrow or the next day. Plants are looking good. Unknown 1 still looks to have a slight nitrogen toxicity, but doesn't seem to be affecting the plant's health much. Averaging 65% rH and 77℉ Nothing else to report. Looking forward to next week - the second and last topping will happen in the next few days. After the stems grow horizontally enough I'll switch to vertical growth. I'll aim for about 14" tall and then switch over to flower. Hoping that will be around week 6. Just picked up some awesome flowering powder I am excited to try in a few weeks. Plants are chugging right along! Happy growing everyone! 👽

W18 (29-5 to 4-6) 29-5 Temperature: 26.7 degrees (lights on) 21.3 degrees (lights off) Humidity: 56% (highest) 46% (lowest) Watering: Both 750 ml. 30-5 Temperature: 24.7 degrees (lights on) 21.8 degrees (lights off) Humidity: 57% (highest) 46% (lowest) No pictures. 31-5 Temperature: 26.5 degrees (lights on) 22.1 degrees (lights off) Humidity: 57% (highest) 49% (lowest) Watering: Chemdog #1: 500 ml. Chemdog #2: 1500 ml. 1-6 Temperature: 25.8 degrees (lights on) 21.4 degrees (lights off) Humidity: 58% (highest) 50% (lowest) No pictures. 2-6 Temperature: 22.1 degrees (lights on) 18.2 degrees (lights off) Humidity: 57% (highest) 45% (lowest) Watering: Both 1000 ml. 3-6 Temperature: 25.5 degrees (lights on) 18.8 degrees (lights off) Humidity: 56% (highest) 47% (lowest) No pictures. 4-6 Temperature: 25.9 degrees (lights on) 18.8 degrees (lights off) Humidity: 56% (highest) 45% (lowest) No pictures with the lights off for this week, i will harvest them in about 2 days, so the last day i will shoot some nice pictures.

Switched to 12/12 a few days ago. Girls are loving it!! Also after treating for bugs of some sort I let loose ab 50 ladybugs (most of which died but some are doing well) hopefully they pick through and get rid of anything left behind. Color is good but there’s a few brown spots and brown tips on a cpl leaves. Defoiled a bunch of leaves hoping it pushes all growth upwards. First time scrogging so this is all experimental for me so I hope I’m doing well! We shall see in ab 8 weeks when she’s ripe I can’t wait!!!

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 These girls held up pretty good while we were gone..They still look too dark/overfed but already well into their flowering stretch and have surpassed the other strains in height despite being the smallest plants this entire run...but we're still expecting the typical kush "golf ball" yields lol...They're all showing signs of a slight calmag deficiency (or light stress?) so we gave a full strength shot of calmag earlier today, raised the Solux about 3 inches and will document any change next week... The light is currently at 75%, we'll keep it here until their stretch is over and finish the grow at 100%... I'm blown away at how good the Solux350 is at lighting up an entire 4x4 despite being the size of a shoebox, its a star in a jar lol.. not too much else to report, looking forward to their color bouncing back..thanks as always for dropping by and happy harvest folks!! 🤘😼❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_