The Grow Awards 2026 🏆 
Does anyone use the flower care app and device I b...
Bennygen2started grow question 4y ago
Does anyone use the flower care app and device I bought it on amazon and seems pretty accurate well the temperature and soil moisture are very very accurate so guessing the others are
Open
Setup. Sensors
likes
Answer
Findtheloraxanswered grow question 4y ago
I have 2 of those sensors and I believe they work pretty well. They are Xiaomi MiFlora. I have mine linked with Home Assistant and a Bluetooth to WiFi link and I can view the data anywhere to check on temps and lighting. Normally they only give you data when in BLE range. I also wrapped the top of mine in plastic wrap to avoid moisture when watering. It is of course just another data point so pay attention to your plant also.
1 like
Complain
Similar Grow Questions
Solved
Hisknibbs935
Pre run test showing high temp and low humidity,Hello,I have pre run to test the temps and humidity on my first one ,i run a 600w hps in a 1x1x2 tent with 5 inch rvksileo extract my temps at at 35c and my humidity below 30 despite setting for 55% would a test without a plant be false ? Should i drop to 400 ?Setup. Sensors
Setup. Lighting
6y ago
1
3
Solved
Renco42033
101 Help with build of DIY humidity controller.High,
I am building a mini grow setup in a very small area and want to make my own humidity control system., Not knowing alot about the way to approach it, thusfar I have the parts ready I think but my question is: Do I need CODE to finish the set up?
Greetz,
Renco.Setup. Sensors
2y ago
2
Solved
ClydeGrows
pH meter calibrationSorry for all the Q's lately haha! pH meter problem. Trying to calibrate and it reads all three solutions as 3.9-4.3?? I used distilled water and fresh sachets. Literally arrived today and it ain't fucking working 😂😂 universe is against my grow :(Setup. Sensors
3y ago
8
5
Solved
Abacus
InkbirdI bought a inkbird itc 308s to control temperature. In heat plug I put a little heater, but in cold? I was thinking to connect extractor, but until now in my grow the extractor was always on, from 1st day of veg to last day. So, should I connect something to cold plug or not?Setup. Sensors
3y ago
2
Solved
Ghosttown
Grow thermometer appI'm looking to update my grow room with a new thermometer / hydrometer that will Monitor and record things through an app. Do you guys have some suggestions. I have a standalone hydrometer / thermometer but I would like to track the temperature and humidity in both grow and BloomWeek 11
Setup. Sensors
6y ago
1
2
Solved
versace_grow
RH 90% during Flowering!I have a problem with RH. I am at the 3rd week of Flowering and I'm struggling to keep my RH down. Today it was 90% when I opened the grow box. I have access only to a window. Is it better to suck air inside or blow the exhausted air out? I can't do bothSetup. Sensors
Setup. Ventilation
6y ago
2
3
Solved
WeGrow
placement of sensor for humidity/temperatureWhere should I place the sensor for humidity/temperature? I see huge differences depending on the spot, I have placed the sensor now slightly below the top leaves - above the lamp directly hits and it has 4 degrees (celsius) more!Week 6
Setup. Sensors
1y ago
3
3
Solved
Sang79
Ph of the soilPh of the soil, I checked with this 2 ph meter but I dont know the credibility, if that work.. I see that is around 8.0 but I use water at 6.0ph and soil light mix biobizz, bio grow ,calmag , bio heaven. Are biology shouldn't change the ph.. how is possible? Advise?5y ago
5
Solved
versace_grow
Hi everyone, I would like to ask you how you test Temperature and RH. Do you put your thermometer under the direct light at the base of the plants or inderectly, because I have pretty different values . If I put it under the light my temperature is near 35°C and RH is under 20%Setup. Sensors
6y ago
2
5
Solved
AliceInChainsmoke
Ph devicesWhat ph pens/meters/testers do you recommend? Any good digital ones on Amazon?Setup. Sensors
5y ago
3
3
Solved
NCgrower252
Cord for Vivosun Controller to automate an electric heaterI have a Vivosun CFM In-line duct with the Temp/Humidity controller. We’d like to connect an electric heater so that it can automatically come on when the temp is low inside the Tent. Any suggestions to what would be compatible to my Vivosun temp/Hum Controller?3y ago
2
2
Solved
Newbiegrower420
I was struggling with low humidity, now I can’t keep it below 70%.Hi! Since upgrading my 4 girls into new 3 gallon pots & giving them a good water the humidity levels in the tent have soared to over 70% Will this reduce as they drink all the water in the pots? Shld I invest in a dehumidifier yet? Running out of space 😬Week 3
Setup. Sensors
5y ago
3
5
Solved
snowmanbl90d
PH TestingI have a vivosum ph meter, a ph tester for the up/down ph liquids and ph test strips. All of them don't seem to agree with each other with in a range of 1 ph across the ph scale. My question is what is the most reliable or is there a different method I should use?5y ago
3
4
Solved
AirDuster
Help in understanding instrument readings for hydroI'd like to undertand what the importance or significance of these numbers are, and if they indicate issues to resolve:
Hydro - 30 litre reservoir
ph: 5.91 - pretty sure that's in the perfect range for hydro
ppm 1502 - no idea
μS/cm - 3195 - no idea
humidity 41%
Temp: 21 - 36c6y ago
4
4
Solved
dataTwiiix
Ph mètre conditionnement apera ph 20Voilà je viens d'acheter un ph mètre apera hppmais malheureusement je n'ai pas encore de solution KCL pour le conditionnement de l'électrode. J'ai lu que je pouvais utiliser les solutions tampon de 4 et de 7 pour le conditionnement. Dois-je remplir le capuchon de solution?4y ago
1
1