The Grow Awards 2026 🏆
Likes
18
Share
@MaxMo8
Follow
This end week 4 flowering last defoliation happy growing
Likes
5
Share
Teilweise sehr hellgrüne Blätter.. vllt möchte Sie mehr Dünger? Gerne mal kommentieren, was ihr denkt. Sonst kann ich mich eigentlich nicht beschweren.
Likes
27
Share
Data.... So there we have it. Another harvest in the bag and some very nice nugs of Zamnesia Biscotti to wait to dry and cure to perfection. The strain has been great to grow with no issues with anything I threw at it. I didn't see the need to use anything to minimise the iverall size of my plants but went with the nutes to see what the results would be. We will get a better idea once dried and cured with a yield per plant to go with too. I am not expecting g a huge yield based on their overall medium size bit rhe buds look so sweet amd smell amazing of a pineapple type sweet and a fuel type undertone. I think a cure will really bring out the best in these. Roll on the final report. Thank you Plagron and Zamnesia for the opportunity to try these out. Thanks for sticking g with me for this one and hopefully some nice bud porn in the last post once finished. Be
Processing
Likes
84
Share
@Beans
Follow
1 Leaf is obviously 1 tough customer....but is he tough enough? Can he hang with the present level of toughness he possesses? Watch and find out! (apparently my plant thinks it's a dude) Defoliated pretty heavily toward the end of the week. partly to try to stunt growth a bit but also promote more growth once it kicks in. Got a log jam going in my flower tent and not sure what to do. May just designate 3 mothers then cram 3 in to flower in a few weeks when its opened up. This is what happens when you feel like you cant throw away anything that might be clone-able. I've gotten past it thankfully and learned a lesson in how to time things next time.
Likes
12
Share
early cut pinepple ... bloom with some problems the low leaves fall as if in nitrogen deficiency but it does not seem possible ... could be the ph but I always measure it and it turns out 5.5-6.5 ... can you help me? in your opinion, how do things proceed? I put in bloom too early?
Likes
5
Share
@Highdro
Follow
This week I started bloom feed along with dutchpro explode at 50%. I defoliated alot of undergrowth as it would only struggle to grow. I removed half of what I wanted to remove due to not wanting to stress them too much.
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 💡🌱🤘🐱 Week 10 of flower! Amber trichomes are starting to form, we're cloudy in most sections but there's still a bunch of clear a little deeper in. This is probably their last full week..we cut all nutrients nearly a month ago and have been watering heavy (as we typically do during flush) but they have only lightened slightly, we use a soilless media which should be completely flushed out by now but most the leaflets are still super dark, after seeing several other grows of this strain we assume it must be characteristic of B.B..we have 4 grow areas in our grow room and the Bangers can be smelled over everything else.. It smells like Fruit Loops with notes of gasoline 🍓⛽...The SP-3000 by MarsHydro is an absolute beast in a 4x2, this is our 2nd grow under The SP-3000 and we completely filled the 4x2 on both occasions. Each run resulted in massive, compact Buds just covered in resin..its without a doubt the best LED of its size we have in house or have ever been privileged to use honestly... Full disclosure: we got a little impatient starring at these girls, so we (well I did lol) pulled down a bud 2 days ago (approx. 10grams) and immediately threw it in the oven for decarb..we made a 5oz batch of tincture and this is easily the "speediest" Seedsman strain I've tried to date, its a surprisingly clear headed high, definitely a daytime smoke..however, may have a different opinion after a proper dry and cure..we'll update our smoke report after drying...thanks as always for dropping by and happy harvests everyone!! ❤️💡🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
21
Share
Likes
10
Share
Hi Dear Friends, 👨‍🌾 👩‍🌾 Responded well to topping, plant is developing good and strong! I'm expecting a lot from this legendary genetic, I'm expecting a huge production of big and strong buds!! ✅ VEGETATIVE week #7 (LAST WEEK) 30/12 SWITCH 12/12H 📅this week goes from 26/12 to 01/01.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 26/12 3ml/lt TOP VEG 30/12 TOP MASS 0.2ml/L + 2.2 ml/L TOP VEG 31/12 SENSI CAL MAG EXTRA 2ml/L foliar spray WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night.... Now we started a new grow with six awesome strains!!!!! In this diary you will see our journey with MOBY DICK by our friends Seeds Mafia, sit down and enjoy the show! We are growing in a 15L Smart Pot with Light Mix soil by BioBizz Moby Dick is a potent and productive strain that may reach a maximum of 21% THC. Although it may be grown indoors, it will yield the maximum results when grown outdoors thanks to its sativa genes that make it resilient to pests but also because it needs much light and lots of space to reach its full potential. Its flowering period is about 60 days, and when grown indoors it reaches the maturity in about 9 weeks and gives a harvest of 650 grams per m2. When grown outdoors, it is harvested in early October and may even reach 1000-1500 grams per plant. Speaking of the effects, it is a typical indica which produces a high level of relaxation with some mixed sativa effects that stimulate the brain. It also has intense and long-lasting effects. Speaking of the flavor, Moby Dick Feminized mixes the floral accents with the coniferous and woody ones and leaves a persisting spicy taste in the mouth. If you want to be high, you should definitely try this one! 💸💸💸💸💸 Here you can buy seeds of this top shelf strain: https://seedsmafia.com/en/feminized-cannabis-seeds/moby-dick-feminized.html?search_query=MOBY+DICK&results=2 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA -FANS: A)OSCILLATING FAN D.15cm 2 speeds 20w B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet) C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability. 💊💉💊FEEDINGS: We used BioBizz light Mix TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
14
Share
@BLAZED
Follow
Week 5 (28-2 to 5-3) 28-2 Temperature: 24.3 degrees (lights on) 19.7 degrees (lights off) Humidity: 56% (highest) 46% (lowest) Watering: None. Today i set the exhaust to setting 3. 29-2 Temperature: 23.9 degrees (lights on) 19.4 degrees (lights off) Humidity: 65% (highest) 48% (lowest) Watering: None. 1-3 Temperature: 24.5 degrees (lights on) 19.3 degrees (lights off) Humidity: 66% (highest) 51% (lowest) Watering: None. No pictures. Today i set the light to 75% strenght. 2-3 Temperature: 25.4 degrees (lights on) 20.2 degrees (lights off) Humidity: 59% (highest) 45% (lowest) Watering: None. Today i removed some fanleaves. 3-3 Temperature: 25.3 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) Watering: None. 4-3 Temperature: 23.6 degrees (lights on) 19.7 degrees (lights off) Humidity: 65% (highest) 46% (lowest) Watering: Both 1500 ml. No pictures. 5-3 Temperature: 25.5 degrees (lights on) 19.4 degrees (lights off) Humidity: 61% (highest) 49% (lowest) Watering: None.
Likes
14
Share
First glimpse it’s perfect. Now I will cure the buds in a jar
Likes
19
Share
@nonick123
Follow
Día 13 (06/05) Nos acercamos al final de la fase plántula. A ver si ahora empiezan a crecer de forma explosiva! He sido muy estricto con los riegos, dejando que el top hasta el nudillo se seque completamente! Día 14 (07/05) Hago una mejora en la tienda. Hasta ahora tenia intracción pasiva, pero ahora he instalado una turbina para que impulse aire fresco dentro de la tienda Día 15 (08/05) Con el calor que hace me sorprende que las macetas sigan aguantando la humedad, pero al hundir el nudillo sigue húmeda. Mañana haré un riego de nuevo Día 16 (09/05) Relleno el top con sustrato para compensar la compactación y dar mas soporte a las plantas Riego con 300 ml solo H20 - pH 6,2 Día 17 (10/05) Baño de sol de dos horas. Día 18 (11/05) Baño de sol de dos horas Día 19 (12/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
13
Share
@FUH20
Follow
Technically this is veg week 2, currently still going. Had some cal mag issue so I started to put nutes flush with pH 6 then fooliage spray with cal mag 1 ml per 300 ml. Also nutes at 550 general hydroponics trio. So ending of this week 2 veg about 21 days since I planted the seeds, had issues with nute burn I gave double ppm by mistake thinking it would help the cal mag issue but ended up burning some baby leafs, so far looks like it grew out of it but I'm guessing yield will be effected greatly. Lesson learned
Processing
Likes
12
Share
1/14: This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiences here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. That's it for week 4-
Likes
10
Share
Harvest day 66 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚 Very nice phenotype with an extremely good smell. Growth was normal after the initiation of flowering. Looks beautiful with its jagged leaves 😃. As always, the Green House fertilizer did a very good job and I can only recommend everyone to try it out🚀 Have fun and stay healthy 💚🙏🏻
Likes
9
Share
harvested it one week earlier than i planned on my mother passed away and i was not around for 3 days taking care of things and when i came home she was very angry at me so i decided to chop her down will update a dry weight and taste when this stuff is ready taste is great effect is awesome