It's been 37 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. It really got my last grow extremely frosty and is doing the same so far for this grow. I'm very happy with every product I have gotten from mars hydro 👍👍There's not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍   Track: Ethan Meixsell - Thor's Hammer [Rock] Music promoted by BreakingCopyright Watch: https://youtu.be/o6Gr0xn6U88 Download: https://www.youtube.com/audiolibrary_...

Lst bağları çözdüm scrog ağı montajı tamam bu yaratıkların gelişimi nasıl olacak?

I fudged up one pot , when lifting it the down part popped and root parts went away. The plant already had his main branch broken and is still hanging. Please advice on the deficiencies of the biggest plant. What other nutrients can I add here ? I have humic acid in little pallets. Dutch pro bloom is coming on it’s way, I’m still watering with hand distributed nutes that could have the emblems “A”+”B” mixed up. To everyone telling that it brings a big issues to the company - no - it’s just a dude most of the time buying bulk amounts and selling per liter, having the original packaging on the bottle glued up. Anyway, any advice is appreciated.

Not much happening when this one just started for fun hehehe.

She's looking very healthy and strong so far, although she had to handle a little fungus gnats infestation which has been completely errdadicated thanks to the treatment with nematodes this lady is starting to get into the shape I want for her. Let's see what we can do!

So this is the start of the fourth week with me. I find this very engulfing. I like spending an hour with them a day and move the little ones out of the bigger fan leaves shadow by tucking the larger ones away giving the little ones a chance to get more light and flourish. I’m noticing more the strain my one girl went through compared to the others, her leaves being smaller than the other girls. I’ve tried to give them the best environment I can and realize I still play a huge role in their life. This is my first grow and I love it. I hope they grow up well and flourish. They were fed last week and had a bit of nutrient burn so this week I gave them just water. I’m not sure how much longer I should veg but I hear in the scrog game the longer you veg the better. Hoping for the best for everyone on GrowDiaries and their grows!

Day 50 Friday 17/05/24 I attempted to try mainline her, failed 😅 But I think I'm learning the fundamentals of this method. She seems to have exploded since I did it. The tops seem to have a surge of energy. Seeing sex all over plant now😁 female first tell signs are awesome to see 😍 Feed today. Day 52 Day 9 Flower 19/05/24 - Sunday. Water today with calmag- Finally seeing her slap them female pistils out, and turn a nice vibrant green on her tops indicating the pre flower/flower stage. Since trying the mainlining and lollipopping, she really has thrown out awesome new growth development. Continually pulling tops back down via lst to encourage an even canopy. Day 56 Day 13 flower 23/05/24 Light water with calmag Wow, this one loves pre flower stress. Her stretch is starting, I've stopped plucking and snipping till required now. The tops are throwing so many bud sites out it's incredible.

ladies have started to take off much more this week. I added heavy 16 finish to schedule of nutes. may be adding fire and roots also over next weeks. no huge issues this week, felt pretty dialed in for most part. using grow room glasses ive found i can get decent video of the girls under lights vs having to take them oit find ok lighting and taking a pic. noticed smell coming off the plants this week, its weak right now, but definitely starting to stink! going to top at the 3rd node once they reach 8 inches tall. after day 28, I transferred into 3 gallon fabric pots, which will be their final homes til harvest! (bottom leafs on plant #1 got some spotting, one side was windburn from earlier in grow, the other side I got a few drops of nutrient mixed water on them, and even after wiping away it left spots on leaves, its all good they are going to be removed after topping)

Hey everyone 🤗. This week they both continued to develop very well. I especially like Pheno 1 visually ☺️ although both phenotypes smell very good 👍. Flowering day 28 Today the tent was cleaned, the humidifier refilled and both plants sprayed with Canna Cure :-). Flowering day 29 Both were poured today with 1.2 L per pot 🙂. Both were also checked for their health and pests 👍. Everything looks great 🙏🏻. Flowering day 30 Again the tent was cleaned and fresh osmosis water was filled into canisters. Flowering day 31 Today 1.5 l per pot was poured so that some drainage comes out again. therefor two days are not poured 😋. Flowering day 32 The tent was cleaned, the humidifier was filled, both plants were checked for vitality and the entire electronics were checked for functionality. Flowering day 33 Today both were sprayed again with Canna Cure and checked. Flowering day 34 We have reached the last day of this week and again 1.2 L were poured per pot and the tent was cleaned 👍. I hope you have a lot of fun with the new update, and let it grow 🍀🙏🏻 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

👹 Monster Marker – Sweet Seeds Absolutely crazy strain! 😎🔥 The terpenes are super berry-like and sweet 🍇 – smells amazing already. The bud structure is starting to show some foxtailing, with very short internodal spacing 🌿💪. I’m really curious to see if the colas will grow completely together by the end of flowering 👀✨ Follow me here and on Instagram: @DendeGrow to stay updated – I share more grow tips, tricks, and behind-the-scenes content over there 🌱📸 --- 👹 Monster Marker – Sweet Seeds Absolut krank, diese Sorte! 😎🔥 Die Terpene sind super beerig und lecker 🍇 – der Geruch ist jetzt schon der Hammer. Die Budstruktur zeigt bereits Foxtailing, mit sehr kurzen Internodien-Abständen 🌿💪. Ich bin gespannt, ob sich die Colas am Ende komplett miteinander verbinden 👀✨ Folgt mir hier und auf Instagram: @DendeGrow, um nichts zu verpassen – dort gibt’s noch mehr Tipps, Tricks und Einblicke rund ums Growen 🌱📸

High temperatures and nutrient burn. At this point i have no idea what i am doing. Every now and then SD2 and SD3 release typical weed smell but apart from that no other smell. The stems upon rubbing and touching smell like cinammon,cloves and orange zest.It reminds me of fanta drink.

Hello colleagues! As for an autoflower, the cycle did not take much time and brought good results for me. Thanks to GanjaFarmerSeeds for the opportunity to test a new strain, also thanks to everyone who came and commented on this diary 🙏 See you soon😀👍

Cant take my eyes off my plant. This is my second round of growing and I am the type of person who learns through failure (not gonna upload the pics of the first round plants lol). The buds are thickening up very nicely. Hoping to get between 3-4oz , the strain is high yielding but I have a smaller tent. My auto yielded 2oz with the same space (2 plants in one tent splitting the space), but the buds definitely didn't develop as well as these buds.

10/8 - going along steady. I'll take few more glam shots later. 2 MONTHS. It may not look like much but I'm proud of these 3. This is probably the healthiest tent I've had since I started growing inside. I just want them to fill out the net a little better before I flip. 10/10 - trellis training is underway. Between topping and this, I should have a nice, full canopy this time around. I've estimated about 72 squares in my net yet only about 35 or so colas forming. Wondering if I should really I push this one or quit while I'm ahead. One thing is for certain, Moby dick is responding much faster to being topped than GZ. Every stem of Moby I've topped has grown lower shoots aggressively and quickly. Gz has been far slower to respond. Noted. Can't wait to see these things bud. But patience is a virtue here. If the veg stage is any indicator, the buds going to be phenomenal.

✂️ Harvest — From Chop to Bubble Hash (Final Review) 🌿❄️ Harvest completed with dense, resin-heavy buds and fully swollen calyxes. Trichomes were mostly cloudy with a touch of amber, and the aroma at chop was loud — sweet, citrusy, and greasy, filling the room instantly 🍊🔥 After harvest, the plant was air-dried for ~5 days at 16–19 °C, keeping conditions cool to preserve terpenes and trichome heads. Instead of a full flower cure, I chose to process the harvest into Bubble Hash, focusing on resin quality and terpene retention ❄️🌿 The wash went very clean — trichome heads separated well, showing strong resin production despite earlier challenges during the run. Smell stayed fresh and powerful throughout the process, confirming the effectiveness of the environment control and flush. This grow was a big learning experience. From training in veg, managing powdery mildew in early flower, switching to RO water, and finishing with Flawless Finish, everything contributed to a clean and satisfying result. Ending with one plant proved that quality and consistency matter more than numbers 👑 Overall, very happy with the outcome — solid resin, loud terps, and valuable lessons gained for the next run. Looking forward to applying everything learned into the next diary 🌿🔥

those nugs are getting bigger and bigger each day. They‘re just soaking up the fertilzers. We have to water them every second day 2l per plant

Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #7 2020 September 3th - 10th. General Info: When planted: 2020 July 23th. Week: 7 Days: 42 - 49 Last Update Day: 2020 September 8th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan: Lower: 4" Ram Fan. Upper: 9" Voxon Box Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Water pump: Digital microscope: cheap Chinese USB X4, 1600X. Comment This week not going to do any training at all, I will let them just be happy lol 😆✌️ Watering every 2 or 3 days, every other watering I use nutritions. Everything going as planed, these girls going to be massive!