It’s the final week. I’m just giving them a couple of waterings with ph’d water before the chop.

She start bulking up and 2 weeks ago I change light to 12/12 and finally preflowering over its look bud start bulking up she take around 15 week to finish do u think is worth it to wait 15 week for auto? Smaller plant buds are very dense honestly I neve seen auto like that I think smaller plant finish in 3 weeks not big yield but high quality bud will be for sure Day 66 I cut most fan leaves coz too bushy and light couldn't go through lower bud side to I give lady little hair cut lol Day 69 I move her into autoflower tent with 18 hour light under new light

Having to constantly move the ties as each branch keeps pulling in closer together , keeping on top of defoliation starting to get a weak smell when opening the tent overall plants healthy

Day 84 - June 25 June 25 - 09.30AM Trichomes still not ready at 50/50 milky to cloudy. Soil is still moist. Will water either late this evening or tomorrow morning. I suspect this will be the second or last watering before chop. June 25 - 09.00PM Removed a dead leaf - I want to remove some of the dying leaves on the colas, as underside of plant has a beautiful purple hue to the leaves. June 26 - 08.45AM Trichomes are starting to turn milky, with 60/40 milky to cloudy ratio. Will water this evening as pot is getting lighter + soil isn't as moist. June 26 - 01.20PM Purple is here. I think it's time to chop tomorrow as I'm seeing more ambers. I'm noticing some bright green growth which I hope isn't the start of nanners. June 26 - 01.20PM Watered 3L. Chop tomorrow. June 27 - 00.00AM CHOPPED (Day 86). . June 27 - 00.00AM Inspected detached calyx with strange (I suspect pistil) growth. Many amber trichomes found. Strange, given colas I inspected were all cloudy with no amber, but this calyx (located at centre of plant) had plenty of amber trichomes. Perhaps this is due to recieving a higher than expected DLI at hotspot of light. . June 27 - 00.00AM Underside of Buds are underdeveloped in comparison - easily due to light blockage. I aimed not to defoliate as she entered flower, but perhaps with better LST and leaf tucking I could've produced more even yield. . June 27 - 00.00AM Trimmed Fan leaves and mostly necrotic foliage - want to avoid bud-rot at all costs, but I may have over-defoliated. . June 27 - 00.00AM Drying hanging upside down with oscilating fan above (2/10) and one beneath driving air toward a wall of the tent. There's also an extraction fan at the top of the tent. . June 27 - 00.00AM Humidity 60-62% & Temperature 64-66F. . June 27 - 02.45PM Temperature is rising in the tent to 69F, inside a sealed bathroom room. Sealed Bathroom offers no light leakage, but I might need to open the door and allow light + cool air in. . June 27 - 03.45PM Moved tent out of bathroom to get cooler air. Tent temperature was just under 70F. I've likely lost some flavour over a few hours - but now that it's in a cooler environment (with slight light leakage) - things should improve. . June 27 - 03.45PM Temperature & Humidity are 66F and 60% respectively. . June 27 - 04.00PM (16 hours since chop) . June 27 - 04.05PM Added portable cooling unit to intake, this should drop temperature by a degree or two hopefully. Ensured Fans weren't directly in path of buds. . June 27 - 04.30PM Humidity is 66%, I've increased oscilating fan speed to 5/10 to combat this. . June 27 - 08.50PM Humidity is 60%. Temperature is 66F . July 1 - 09.00PM Branches still bend - not snap. Will trim and start cure process tomorrow. Leaves shrivelled up. . July 2 - 10.00AM Rough Trim, and placed into cure jars. 58% RH and 60% RH Probably should have harvested last night. Will maintain RH in jars via burping. Roughly 2oz (56g) of bud harvested.

12/13 Week 6 Second week of flower will be moving to just bloom nuets this week. Leaf tucking and occasion tightening up of bends Going to stay under 1000ppm for that see what the plants say about it. 12/14 Foliar feeding due to slight signs of Mag def and I mean slight on a couple of leaves. RO water, wetting agent, 1ml CalMag/quart, leaves well covered on both plants at lights out. Put the lights off pics at the top 12/15 Phasing out Coco Tek Grow in favor of Bloom Defoliation day - opened them up cleaned up lower end pics later maybe tons going on 12/16 All Bloom now 850ppm watching leaf tips close, increasing feed amount for good runoff 15%

For the first 2 weeks the pot was weighed before watering. Into Substrate 10ml D1: D2: 5ml D3: keep moist D4: 10ml D5: keep moist D6: 13ml D7: put towel in tent for more humidity Lamp 70% 65

Today is week 5 now since dropped in water to be honest I think these are growing slow compared to other peoples. I changed a couple of things like upped wattage of metal halide from 250 to 400 and started giving full strength nute from half strength which I should of give 3 quarter strength instead of full because I can see a slight tip burn so will back of a little. Water every day till run off. At some point this week I will top for the first time to get the main line thing up and going. See you next week peace.

So far 44 grams total dry weight of flower. I have 1 zkittlez girl left. Smoke is amazing and the sedating effects come after the peak. Overall great looking and tasting bud.

Week 8 flower. All getting just water at 6.5ph only a couple of weeks left for some

😈😈😈

Zz

Loved it!

Welcome to week 2 of my Bubblegum XL diary, genetics by Royal Queen seeds. Looks beautifull, no starting problems. Grows fast since day 1. Small full spectrum burple cob light is doing its job very good, and as you can see the plant is growing as we like it to. GHE changed its name to Terra Aquatica, so its terra aquatica nutrients -- update day 3 wk2 Repotted into 15l rqs smartpot -- update day 4 wk2 Topped/fimmed plant, lets see how it comes out in the future Added small after-transplant video

08/07/2020 Flowering week 2 for the bigger plant, all are cuttings of Red Sky I'm growing outside but this one is stinking some crazy smells not sure how to describe burnt rubber? And pine tar? Best I can say. Application of L A B this week to feed the microbial communities. Application to leaf surfaces to combat pw (prevent) bud rot.

Hey friends of good grow😊✌️ This week was ok . I had to remove one alien because of hermaphroditic. Sad but think the pheno is very sensitive and has not tolerated the topping. The other two are great . Smell and look good💚 This week there was again Enhancer from Ghsc and the ladies love it 😊👌

Never done this strain before have another going that the seed is supposed to be female. Testing said way to see seed dont think it work but why not

Hey now, hope everyone is having a safe weekend. I currently have the Spectrum X running at 100% power and have upped the time on the UV/IR bars to 90 minutes just prior to lights off. I am super happy with this light so far, she puts out impressive PAR, and runs fairly cool. The only thing I would change is to have individual timers for the different spectrums. I did hear from another grower that Medic Grow does sell a controller that has this feature for $300. Not much to do this week other than keep the reservoir full and in the correct PH range. The tomatoes outside are absolutely loving the runoff from these autos, as that is all they have had to drink since they were about 3 weeks old. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

This strain is currently satisfying us greatly, in fact the mainlined one is the best for now without a doubt, its name is King Louis Automatic. Remember that we are growing a plant worked with the indicated techniques and another left to grow without pruning to preserve its speed; in the previous/next diary you will find the other plant of the same variety. This plant has started flowering after a Main Lining that was a success in a Masterful way thanks to a good grower and a fantastic plant with a wide internodal distance: topping at the second internode, creation of the Mainfold, the brunches have stretched naturally and parallel to the ground with just a little pressure, no sign of breakage, fraying of the hemp, nothing. Everything very graceful, aligned and in rhythm. Truly everything is in its place, fingers crossed we will be able to see a mega result. Comparison is the salt of experience, so the plant in the other diary will be treated very differently, go and see it to make a comparison. We started the Plagron fertilization program, we are in 100% organic configuration, the soil is composed of recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhizae Mix (4 g in the mix, 1 g under the small fiber pot). In the middle of the week the pre-flowering began so I decided to start the program for this phase: 1 ml/l of Power Roots - 1 ml/l of Pure Zym - 1 ml/l of Sugar Royal - 1 ml/l of Power Buds - 2 ml/l of Alga Bloom Remember the Green Sensation from the 3rd/4th week of flowering depending on the flowering speed or how you see the calyxes composing, when the calyx is in the swelling phase it is used. We sprayed 5ml/l of Vita Race foliar fertilizer once a week. ------------------------------------------------- https://plagron.com/it We always have the excellent RQS mycorrhizae running through the soil. https://www.zamnesia.io/it/5778-mix-micorrhiza-easy-roots.html Love this strain perfect for main lining! ---- https://www.zamnesia.io/it/11238-zamnesia-seeds-king-louis-automatic.html Brief description of Zamnesia // Say hello to true royalty with King Louis Auto, an autoflowering version of the original King Louis. Bred from OG Kush, LA Confidential and a premium ruderalis cutting, King Louis Auto delivers premium bud fit for a king just a few weeks after germination. As if that wasn't enough, her small size and vigor make her great for almost any grow environment. Incredibly efficient King Louis Auto has inherited the best traits of her photoperiod cousin, all wrapped up in a fast and easy-to-grow seed. With good soil and adequate watering, King Louis Auto seeds will quickly grow into robust and vigorous plants. Once fully mature, these plants will not exceed 80cm indoors, meaning they can easily fit into even the smallest of grow spaces. Likewise, outdoor plants will only reach 100cm, making this strain ideal for guerrilla grows or other environments where discretion is key. And if that wasn't enough, King Louis Auto only takes 9–10 weeks from germination to harvest, after which she'll reward you with yields of up to 300g/m² indoors and 150g/plant outdoors. With its pungent terpenes and high THC levels, King Louis Auto offers a fragrant and relaxing experience. When you open your jars of buds, you'll immediately notice intense scents of pine, damp earth and fragrant wood. After inhaling her equally complex smoke or vapor, you'll be hit with a deep, relaxing body stone that's perfect for those moments of well-earned rest and relaxation. With 24% THC, King Louis Auto hits hard and takes ef The whole world of growing and much more is on Zamnesia: just take a look at the site and you will find "all the best that nature has to offer" in various shapes and colors. --------------- www.zamnesia.com