Processing
Likes
Comments
Share
@
Follow
Likes
Comments
Share
@Antarctic
Follow
Week 8 update (full bloom): The autos are now in full flowering mode 🌸 Buds are stacking well, pistils are everywhere, and trichomes are starting to show up. Stretch is nearly finished – now it’s all about building flowers. Nutrients this week: • Hesi Bloom Complex (base bloom) – plants are responding really well. • Hesi PK 13/14 introduced at low dose to push flower sites. • Athena Bloom + Athena Grow (light mix) to balance nutrition and keep a steady NPK ratio. • CalMag still in rotation at ~1 ml/L. • Silic Rock small dose for stem strength. • Total feed around 800–950 ppm, depending on the plant. Observations: • Canopy looks uniform and healthy – green leaves, no big issues. • Runtz shows the most aggressive bud growth – dense flowers already forming. • Amnesia autos a bit more stretchy, but flowers are catching up fast. • Mike Tyson slowly recovering from early stress, but now producing pistils. • Aroma becoming stronger – fruity and slightly spicy terps in the tent. Training: • Final LST adjustments to spread colas. • Light defoliation to open budsites and improve airflow. • From now on: minimal interference, just supporting the flowers. Plan: • Keep PK booster for another week, then evaluate. • Maintain bloom feed and slowly reduce nitrogen. • Watch trichome development – early frost is starting, but still weeks to go before maturity.
Likes
93
Share
@Ferenc
Follow
Hopefully, this is the last week for the Gelato Cookie D'ohpe. Fan leaves are getting yellow and the pistils are getting brown and also keep checking the trichomes that are getting milky. Watering 125ml 2 times per plant, so altogether 700ml for 2 plants, and now the Gelato Cookie D'ohpe. is being flushed so no fertilization. Purple Punch will be fertilized with the same way before I did and now it is flowering. I removed some yellow leaves from the Gelato Cookie D'ohpe that was dried so the lower buds might be able to receive more light. Monday: Sunday is the scheduled harvest day for Gelato Cookie D'ohpe. I can't wait to happen. Petty much everything is okay. Last day of the 9th week so I trimmed the Gelato Cookie D'ohpe before harvest and also this is the last day when I gave her water so I added extra today 2x 250ml. Until Sunday no more water and Saturday no light also so 3 days no water before harvest and 1 day no light. I removed the oldest biggest fan leaves from the Purple Punch because those were getting yellow and the plant looks much better, let her focus on her buds. :) As I cut off the leaves the Purple Punch has like citrus smell in really like that. The Gelato Cookie D'ohpe is stronger, very strong smell, for me stinky, but the flowers have fruity smell I really like it. So the end of the week Purple Punch is 40 cm, Gelato Cookie D'ohpe is 70 cm.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
150
Share
AvT oh my she just stinks and I'm not sure is a pleasant smell. She is 22 inches tall and just as wide, filling her space nicely. Defoleated her. She is bottom heavy, branches are low and wide. Hung second light so things should be happening. Increased newts to 680 ppm. All things considered this plant is doing great, and really has a strong smell.
Likes
27
Share
Let’s Go day 85 from Seed!! These ladies have all got the chop !! We will be hanging to dry over the next 2 weeks or 12-14 days an we will be ready for trim an jar up for cure! What a very satisfied grow this was @fastbuds_genetics very happy with the strains an would definitely run em again! Hope you all enjoy stay tuned for next week! Start trim up an get some weights!
Likes
39
Share
Holy COW some serious growth this week especially out of the Mimosa she is easily 30 inches right now 12 over the Jaeger I'm going to have to figure out a way to even them out I'm thinking BUCKETS
Likes
4
Share
I am going to Hang dry with the entire plant so I will not have wet weight. But yeah dry weight coming soon!
Likes
13
Share
@goeser
Follow
Day 50 since Germaniation. Genetics are really nice and strong. Even against high amounts of nutritions. Rqs never disappoints but this genetics i like the most so far. Cant wait to see the result
Likes
7
Share
@gablmo
Follow
I finally turned 600 watts on, would love to get comments from you folks, so clueless here. If you see something wrong, please let me know.
Likes
53
Share
@Mz876
Follow
Week 6 of flower about another 2 to 3 weeks to go . Buds are forming Nicely but I’ve been a little heavy on the nutrients so I’m trying to remedy that .
Likes
9
Share
@VIPgrower
Follow
Week 8 four days in flushed the girls big time got tds too 255 for final 7 to 10 days the look great except 1st flush water I used clear and two plants some got rusty spots on leaves and yellow and die but did not affair bad i learned a lot about a proper flush from my neighbors thank god I took his advice on flushing took tons of ph water but should have flushed all unwanted nutrients and salts away and drink nothing but water for its last 7 two 10 days tricombes are almost all cloudy a few Amber and a few not quite cloudy I watch daily now on those I use to wait for hairs to turn 75 percent but that’s not good way to do it invest in microscope or jewellers loop
Likes
4
Share
At the beginning of week 7 of flower she started to fade. Her leafs started to get dark purple starting at the bottom. At the end of week 7 of flower there were first signs of amber trichomes on the top buds. I will wait until the lower buds are mostly cloudy before harvesting.
Likes
7
Share
@PotCasso
Follow
Week 8 Flower Full Bloom Watered in at 600ml
Likes
21
Share
@Mrryan78
Follow
So Roots have hit water and starting to take off I did a water change of 10 gallons and mixed up Jacks at 3.6 grams per gallon 2.4 grams per gallon 1.1 grams per gallon Tree Trunk silica 1 ml per gallon added first Southern Ag Garden Friendly Biological Fungicide At 2 ml per gallon This brought ppm up to 750 ph6.2 I’m very pleased with the growth rate and the way I’m starting to see new growth I set light at 22 inches
Likes
15
Share
@Lontra
Follow
Tag 36: 🌱: Eine neue Woche beginnt und die kleine Lady wächst und wächst. 💧: Die Erde ist immernoch feucht. 💡: Die Beleuchtung ist unverändert (DLI ~40-45, Abstand zur Pflanze ~35cm) Tag 37: 🌱: Auch wenn es wohl nicht der beste Zeitpunkt dafür ist, wurde es mittlerweile doch sehr eng im Gebüsch. Daher habe ich mich entschieden heute doch noch ein mal etwas radikaler zu beschneiden und die schwächsten Triebe, vor allem aus der Mitte, zu entfernen. Zusätzlich wurden auch noch einige Fächerblätter entfernt die andere Blüten zu sehr verschatteten. Ich hoffe sie übersteht diese Tortur. (Beim nächsten mal muss ich die Triebe wohl früher und stärker selektieren...) 💧: Die Erde ist immernoch feucht. 💡: Die Beleuchtung wurde in die (mit Aufhänger) höchste Position gebracht, um den Abstand zur Pflanze aufrecht zu halten (~37cm) und die Intensität angepasst (DLI ~40-45). 🤔: Ein wenig verwundert bin ich, da ich heute plötzlich einige ziemlich violette Blattstiele, vor allem im oberen Bereich entdeckt habe. In Verbindung mit ersten sich leicht gelblich färbenden Blattspitzen, will sie mir wohl etwas mitteilen. Ich weiß nur noch nicht genau was....Sonnenbrand? Zu warm? Zu wenig Phosphor? Ich denke beim nächsten Gießen gibt es als ersten Lösungsversuch etwas mehr vom BioGrow und vom BioBloom. Tag 39: 🌱: Das Blütenwachstum scheint gefühlt etwas gestört zu sein (kein Wunder bei dem Beschneidungsstress zwischendurch). Ansonsten scheint sie sich jedoch wohlzufühlen und noch etwas an Höhe zuzunehmen. Heute gab es daher kleinere LST Anpassungen umd etwas mehr Licht/Luft in die Pflanze zu bekommen und ein einheitlicheres Dach zu erzeugen. 💧: Die Erde war trocken. Gegossen wurden wieder ca. 3 Liter Nährstofflösung. Um etwaigen Mängeln (siehe violette Stiele) vorzubeugen, wurden Bio Grow, Bio Bloom und Top Max auf 100% Düngeschema gesteigert. 💡: Die Beleuchtung wurde in Ihrer Intensität leicht angepasst, bleibt aber weiterhin bei einem DLI von ca. 45 Tag 41: 🌱: Heute wurden einige Blätter aus der Mitte und ganz unten entfernt. Sie streckt sich weiterhin fleißig und arbeitet an ihren so beliebten Buds. Als kleines Extra kam heute auch wieder ein CO2-Beutel in die Box. 💧: Die Erde war noch feucht genug. 💡: Die Beleuchtung ist unverändert. Tag 42: 🌱: Jeden Tag was neues: heute habe ich neben den violetten Blattstielen zum ersten Mal auch violette Stellen an einigen Trieben entdeckt 🤔 Ich hoffe einfach mal, dass dies aufgrund des Phenotyps / der Temperaturen geschieht. 💧: Die Erde war trocken. Gegossen wurden wieder ca. 3 Liter Nährstofflösung nach etwa 100% BioBizz Light Mix Schema. 💡: Die Beleuchtung ist unverändert.
Likes
8
Share
Beautiful pheno of Ak420 by seedstockers same smell as her sister, the other 2 plants of this same ak420 package, let's see how this wonderful lady keeps developing, I think I could have train this lady just like this but I should have gave her a few more weeks of growth before changing the light cycle.
Likes
42
Share
Hey guys, I did some LST with some copper dreads. I like Rubber tie tubes more but my brances are to small for that. A day later i gave them some water with enzymen ph 5.8-6 and yesterday i gave them nutrients and sprayed them with CANNA CURE. I decided to build a roof for my plants haha, i can't help myself giving them the best conditions i can give them for a outside grow. Bought some 20L pots and some garden dreads. Sadly it is still to cold in the night so i can't repot them and keep them outside 24/7. I'm not really sure if i like the way i LST them because it takes a lot of time to recover and grow but like i said i like to do different things everytime. Normaly you should LST them when you got more brances or just bend the main cola. The way i did it cost many leafs while not having much, so you take away lots of energy. By accident a brance from the plant in the middle(look at pictures) got cut off but i really didn't mind because i was planning to keep four plants instead of five :) ps, made the pictures at 10pm so the leaves are down a bit, i might make some new ones when they are happy in the sun therefore they are lifted more. They still get a few hours of sun every day when i put them outside and therefore they still grow slowly, it will take some time. I hope you enjoyed. Update: Made a new picture at daylight under the roof. Putted the plant I don't want to keep in the bigger pot and will keep her outside to see if she can manage through the night temperatures. If i don't see anything i don't like, keep growing in the comming week, i might put all my plants outside permanent.
Likes
2
Share
@Ninjabuds
Follow
My Skunk Apple Run plant is still a bit young, but I can see those buds starting to form. It's a bit of a slow starter, with buds popping up all over the place instead of a nice even line. We'll see if adjusting the light cycle or its food might help it along. I'll keep you posted on any changes. The past few weeks have been so beautiful, watching the plants grow and change. It's amazing how something so small and fragile can turn into something so strong and vibrant. Now that they're getting ready to bloom, it feels a little bittersweet. I'm so excited to see the finished product, but I'll definitely miss having them around while they're growing.
Likes
44
Share
05/06/2021 - Day 14 - First day of the 3rd week. MEMO: I'm using the following "names" for differentiating the two both in comments and pics: 🅰️ - "A" for the one transplanted in the garden soil and that will NOT receive any nutrient; 🅱️ - "B" for the one that will grow in the pot and that will receive nutrients. 👉 "A"is struggling a little after the transplant. Probably suffered a little or maybe she is focusing on the roots, idk. She is little if compared to "B" but she looks healthy so lets' go. 👉 "B" is GIANT! compared to "A". Can't say if the reason is the pot, the fertilizer, the luck or just the difference in transplant time, anyway she is flying 😂 Stem a little bended and unstable because he overgrew and had to cover it last week but not a big problem. Summer has come, sun is warm, all perfect. This week I'll probably proceed feeding "B" with "Easy Grow Booster Tablet" by RQS. Wish me good luck and let's hope in sunny hot days 🤞☀️ - DD ───── ⋆⋅☆⋅⋆ ───── UPDATE 10/06/2021 - Day 19 👉 After a lot of rain starting right today 7 days of feeding with "Easy Grow Booster Tablets" by RQS for "B" as planned. 👉 Also started some LST for "B", not for "A" because I think she is still to small :(