FERMAKOR BARREL MIX – BASE IN USE (Testing on the Fantasy Feast girl we pulled out of another diary https://growdiaries.com/diaries/274722-grow-journal-by-yan402 ) (FERMAKOR BASE SYSTEM KOH VERSION diary https://growdiaries.com/diaries/278391-grow-journal-by-yan402) (Urea & Micros on the way — first week running without them) 🍶💧🍶💧🍶💧🍶💧🍶 💧 30 L Barrel – Current Working Mix 🍶💧🍶💧🍶💧🍶💧🍶 Step 1 – Calcium Nitrate (Part A) 7 L warm water (~35–40 °C) → added 45 g Calcinit, stirred until fully clear. That’s the calcium + nitrogen backbone for the feed. Step 2 – FERMAKOR PK Base (Part B) 15 L water in the main barrel → added 30 ml FERMAKOR PK Concentrate, mixed well. This forms the main P + K part of the formula. Step 3 – Combine Solutions Slowly poured the Calcinit mix into the barrel while stirring — no reaction, still crystal clear. That confirms the mix is stable and precipitation-free. 🌿 Step 4 – FPJ / FFJ Batch Added 30 ml homemade FPJ (fish + veg batch) ≈ 1 ml/L. Color shifted to a light-amber tone — looks alive and active. 🍋 Step 5 – Citric Acid Balance Added 1 tsp citric acid after everything was blended to fine-tune pH and help chelate micros later on. 📦 Step 6 – Top Up & Check Filled to the 30 L mark with plain water → pH tested with drops, showing yellow-green — roughly 5.8 – 6.0 range. Nice clean look, stable smell, no residue. 💧 Current Base Ingredients (Active Mix) Warm Water ≈ 22 L total Calcinit 45 g → N + Ca foundation FERMAKOR PK Base 30 ml → P + K support Citric Acid 1 tsp → Chelation + pH balance FPJ / Fish Emulsion 30 ml → Organic enzyme booster Result: clean amber mix, mild and balanced. I’ll let this version run for a week before adding anything. 👀👀👀👀👀👀 Observations and changes 👀👀👀👀👀👀 27.10.25 VW27 noticed some min burnt tips so I decreased Calcium Nitrate 45 to → 40g, decided to add two more elements micros and Epsom salts just to make sure they got everything, Fetrilon Combi 1 (Micros): 0.5 g, Epsom salts: 8 g 28.10.25 VW27 she seems devoid of any deficiencies, seems ready for the flip to 12/12 02.11.25 VW27 girl is looking good so I decided to stop making daily videos and do a standard once a week update. 09.11.25 aVW28 7 days since flip,stretch in full swing, first pistils showing, leaf color deep and healthy. Slight tip burn early week → gone after pH stabilized. Feed stayed clear, no residue, roots clean and sweet-smelling, did what I hope is a last cleanup and pruning🎥 10.11.25 VW29 added Phosphoric acid pH down to the schedule for flowering stage. 14.11.25 FW1 FERMAKOR PK Micros 40 → 50 ml 23.11.25 FW2 got some burnt tips, observe and act accordingly in case it worsens, diluted by 25% for this week. 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 23.11.25 FW1 – Fed 3l of #1 → 1l runoff 24.11.25 FW2 – Fed 5l of #1 → 2l runoff 25.11.25 FW2 – Fed 5l of #1 → 2l runoff 26.11.25 FW2 – Fed 5l of #1 → 2l runoff 27.11.25 FW2 – Fed 5l of #1 → 2l runoff 28.11.25 FW2 – Fed 5l of #1 → 2l runoff 29.11.25 FW2 – Fed 5l of #1 → 2l runoff 30.11.25 FW2 – Fed 5l of #1 → 2l runoff 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 Veg — FERMAKOR 🍶💧🍶💧🍶💧🍶💧🍶 💧 Calcium Nitrate (Calcinit / Nitcal): 45 g → 40 g → 35 g = 1.33 g/L → 207 ppm N + 253 ppm Ca = 1.17 g/L → 183 ppm N + 224 ppm Ca (current) 💧 PK Concentrate (FERMAKOR Base): 30 ml → 40 ml → 50 ml = 1.00 → 1.33 → 1.66 ml/L → balanced 1:1 P:K + light micros (from extract) 💧 Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → 26 ppm Mg + 35 ppm S 💧 Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm • Mn 0.7 ppm • Zn 0.3 ppm • Cu 0.3 ppm • B 0.1 ppm • Mo 0.02 ppm Phosphoric Acid (pH down) + Citric Acid (chelation): → First set pH with phosphoric acid → Add a little citric only if extra chelation is needed 💧 Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL Inputs: 60 ml → 70 ml → 80 ml / 48.5 g per 30 L = 2.00 → 2.33 → 2.66 ml/L + 1.62 g/L (current) YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

Did abit of chopping this week still abit to go, been looking at expanding this spot to try get few more plants down. Both plants looking healthy, the ny diesel is getting big now, as the cheese has got more closer node spacing. May do abit of lst this week coming as shouldn’t be long before pre flower. That’s all this week, happy growing 🌱

The seeds germinated after 1-3 days, 1x runtz unfortunately did not germinate. 3 Days after the germination the plants were growing too quickly so I repot them them in deeper and increased the light intensity to 50% = 100 watts. When repotting in biobizz light mix, the plants were also given a load of Mykorrizah from Great white premium.

Del 5 al 12 de julio Buenas a todos otra semana más. La cosa avanza bien y Esta va a ser la última semana que actualizamos únicamente una vez por semana, volveremos a las actualizaciónes diarias. Continuamos con nuestro LST diariamente. 8 y 9 de julio Usamos el quemador de azufre alrededor de unas 5-6h como preventivo ante posibles plagas. 10 de julio Hoy a tocado poda (bastante severa) podamos algunas hojas y seguimos doblando las ramas. Las dpblamps entre si, por debajo, por arriba... Por todos lados, es una salvaje. Las temperaturas están siendo muy buenas en comparación a lo que me llegan en cuanto a los indoors de mi alrededor y de otros compañeros. Tenemos unos 25 - 26°C en On cpn Max de 27.8°C y mínimas en pdf de 23°C. Preparados porque viene lo bueno. 11 de julio Regamos vía foliar 1 ml aceite de nem + 10ml spruzit + 1 ml de un producto que nos dieron para probar como preventivo e insecticida. De este mismo liquido inundamos la bandeja unos centímetros para realizar un riego vía absorción. ¿ Por qué ? Pues porque los trips se alimentan en la superficie pero viven en la tierra, y muchos de estos están en la parte inferior de la maceta por lo que no tendran salida estos bichillos. Mi guerra con ellos ya viene de tiempo atrás y quiero mantenerlos a raya.

Week 5 Light cycle=18/6 Light Power=120w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 58% Low Rh= % Rh step=0% Speed max=7 Speed min=1 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.3 DLI aim=28-34 EC aim=1.7 PH aim=6.3 Thur 25/1/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0ml/L Ec=0.25 PH=6.4/6.6 Time start=12.00pm Finish time=13.05pm (7×5 minute runs with 5 minute gaps) Total flow rate=200ml/min Flow rate per plant=50ml/min. Total volume made=12L Total volume left=5.5L Total volume used=6.5L Volume per plant=1.6L (Est) Runoff. Total runoff=0L Ec= PH=/ Did not work properly so need to sort it out. Total flow rate=185ml/min Flow rate per plant=46ml/min. Ran for an extra 15 mins while sorting out system. Should be about 200ml/min now (50ml/min each plant). 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 29) 📋 didn't quite get the amount of water it was supposed to. Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Humidifier on= not in use. Humidifier off= not in use. Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c Humidifier on= not in use Humidifier off= not in use Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.6-1.4 DLI aim=35-40 EC aim=1.9 PH aim=6.2 Fri 26/1/24 #2 (Day 30) 📋 defoliate lower leaves that hardly get any light. Sat 27/1/24 #2 (Day 31) 📋 H=44cm D=38cm DLI=33.5 Raised light about 10cm Increased light power to 140w H=44cm D=47cm DLI=29.5 Sun 28/1/24 I have decided today is going to be the last day of veg before I flip to flower. Lights will have come on today at 6.00am and go off at 10.00pm, they will get 14hrs light today and tomorrow will be day 1 of 12/12. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=Veg nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=4.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Ec= 2.05 PH=6.1/6.3 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=12L Total volume left=2L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.7 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 32) 📋 With no information for flower time I'm going to have to guess she will be finished in 45-60 days. I removed quite a few lower nodes that probably won't break through the canopy, they where ideal candidates for clones. Light cycle=12/12 Light Power=140w 58% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Mon 29/1/24 Lights on at 10.00am off at 22.00pm #2 (Day 33)(Day 1 flower) 📋 H=49cm D=42cm DLI=23.0 At 9.00pm increased light to 150w H=49cm D=42cm DLI=24.0 Tue 30/1/24 #2 (Day 34)(Day 2 flower) 📋 Wed 31/1/24 #2 (Day 35)(Day 3 flower)**** 📋 H=54cm D=37cm DLI=27.0 🚿 foliar sprayed (Sumo Boost 2ml/L). She got flipped into flower on day 32, has caught up to the others in height and even overtook one plant. The cola I stuck back on is a lot shorter then the other 4. Back soon. Take it easy.

Eyes on bud swelling and trichome cluster ripen ratios /./ harvest prep //

Sorry guys, forgot I had this😂😂😂 but this is her week 3. Did some lst and adjustments and she’s responding to it well constantly every time. Follow my ig for constant daily updates💪🏼 Also have 5 other plants not just this one. Follow ! @authenticgrow

Starting week 10 things are looking great! I have nothing else to ask from this plant! it smells so good!! and super sticky when I took her out of the tent to take this photos one bud was touching my arm while I was carrying it and all my arm hairs sticked together and my arm smelled great for the rest of the day haha Started flushing by the end of this week

Buenas a tod@s... Tercera semana de las niñas... Se las ve muy bien, de momento tranki, ya empezamos con los nutrientes y cambiamos una lámpara normalita q no tenía mucha potencia x una de marshydro de 150... Las veo bien, y se pondrán mejor en nada... 💪🏻💪🏻💪🏻⚡⚡⚡🙏🏻🙏🏻🙏🏻 Buenos humos para tod@s... 💨💨 ⚕️😎💎 🇦🇷🤝🏻🇪🇦

Been 10-14 days since I fixed the lighting issue & she's flowering very nicely now. Tho the top of the plant is still a bit behind. There's a street light outside my balcony which still shines a bit of light over the wall that catches the top branches & I wondered if this could be slowing down the uppermost branches. I found some extra sun netting & have hung it on my pergola to block out the street light some more too. Not sure this will make much difference but it has the added benefit of giving her some more privacy as she is getting huge! Have seen some evidence of thrips & mealyworms, which seem to be kept under control by the bio insecticide I have been using. I thought I might have to prolong the grow til late October but the rate she's bulking up now I don't think she'll need to be out there for that long. Time will tell!

Day 46 - Lollipopped all three pearls, I will now wait a week and then send them into flower. Everything is going pretty well with these Ladies.

This was my best experience yet with growing and am quite proud of myself! Training went almost perfect and the plants handled the resistance strengthened up and sprouted so many buds! All we’re dense and frosty by the end time! I dried in brown paper bags in 17.5-18.5c temps with a humidity of 40-50% and took 7 days to dry! I have them curing in 3L glass jars with 62% Boveda pack inside! I’ll be able to really taste the flavour then but it’s already strong and tastes great! Royal queen seeds are definitely worth a top place on seeds! Added a few photos after cure! The smell is like sweet pungent and flowery and the high is full body and u get itchy eyes and dry mouth!

i went on vacation like 10 mins after this. i dont have any pics of the painkiller for this week.

this is the end..

Día 9 (10/06) N/A Día 10 (11/06) N/A Día 11 (12/06) Llueve mucho. Humedad alta por aquí. Eso les favorece Día 12 (13/06) Se empiezan a desarrollar las hojas verdaderas a una buena velocidad! Todo en marcha! 💨 Día 13 (14/06) Riego ligero 100 ml sólo H20 EC 0,5 en previsión del trasplante en el día 15 de la planta Día 14 (15/06) Se nota que estamos en el día 14 desde germinación y la mayoría de las plántulas van viento en popa! Día 15 (16/06) Hoy procedemos a trasplantar a las chicas a su maceta intermedia de 6,5 litros Se prepara con 5,5 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1 Litro de Insect Frass (15%) + 65 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 1L para que quede la forma perfecta de la maceta donde están las plántulas (ver fotos) Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la plántula de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Hello people week # 9 is at the start, unfortunately I can not get the humidity below 40% but we always stay in the 40s, this is accompanied by a temperature of max 26c. The buds are in production, you can clearly see a difference from last week. The harvest is still difficult to estimate when that will be. I fertilize them as on the BioBizz plan until week 10 and I rinse them for another 2 weeks. A little tip: if you turn the pots 1/4 circle every day, this simulates different wind directions. The plant reacts differently to it than when it stands still in a place for 10 weeks. As already mentioned, my rules for autoflowering are: LESS IS SOMETIMES MORE. This helps beginners to take their time to study the plant. To understand the stages of development. Mastering the harvest is only possible through experience. Thanks for your time and for reading. Your green fox 🦊🦊

Sehr schöne Färbung der Pflanze! Sie klebt wie Sekundenkleber und riecht wie ein Honigglas.

Começando a semana 4 com o lollipopping para dar força aos tops buds. Planta com otimo desenvolvimento. Adcionarei 6ml.l de mel para a cura dos cortes feitos. 4 dias depois de fazer o lollipopping a planta começou a desenvolver polem.

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues