The Grow Awards 2026 🏆
Likes
Comments
Share
@Terpyboyz
Follow
Hi growers 👌🏻🍁 This week I’ve had a few slight more issues this run hasn’t been the best so far. But I’m hoping if I can just up my feed as each watering I’m feeding the ppm are only at 450ppm 1ml grow 3ml bloom 2ml top max 4ml heaven 4ml actavira In a 5litre bottle - every 3 days I’ve had a few herm on me - which has been a bit of a disappointing, it just tells me my rooms not dialled in at all. Few more issues to fix next run. All the pink runts autos that finished flowering dried for 1 half weeks then went into canna butter. If anyone can give me a message or comment of anything I can do to try fix these girls I would appreciate it ✌️🏻🍁
Likes
98
Share
💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 42 and she's just killing💀it👌 The Smell has kicked in and is wonderful 😀 👉We are in full out flowering 💐 and its looking great 👈 So Shit , I gave them just a tad to much nutes on the first few feedings 👈 But I have since fixed it So I'm helping out with some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
18
Share
6/1/2020 I aased water with nutes lowered the light about. The leafs were clawing and droopy. I cant seem to catch .break. learned allot. So even though thay will cost more money to but bud fro someone else. That's the whole point of growing. I'm just a little sad and reluctant to keep groing. I think o definitely stunted. More than killing it. Im goona be so upset if I get a shitty amount. I wanna give up. I really do. But I won't this be a game change for me with the amount of bud and money in my pocket. 6/2/2020 They went back right away. Im learning there very versatile. 6/3/2020 Lst today fixed some of what I did. 6/4/2020 She's looking good i gave her some water with kelp in it. Got the 6" fan today gotta find 6" ducting. 6/5/2020 She's gotten so big I can't believe it. Not as big as I'd like but hey its my first grow. I got some mollases today ill start adding that too. I think i can do it with every watering but I think ill stick to feeding time. I raised my lights today. I was getting suggestions to do so. Ill add pictures tomorrow. Its been busy since its gotten nicer. I just did a little lst. And I cracked a stem. Right at the end were its connected to the main stem.. i added a little tape and some stakes. Man I keep messing up. I homw its ok. 6/6/2020 I did some LST to her I hope im doing it right pretty much stake em down so they get more light? I think im doing it right. Anyone wanna tell me if I am or not. 6/7/2020 Nothing today. She took well to this round of lst. End of week 5.
Likes
22
Share
@Prilyfe13
Follow
April 20, 2024 Happy 420 Everyone! A new diary for a new contest by Seedsman! Sit back, because there's a lot to talk about today. Just like all of my grows, this run will have daily updates with pictures, a weekly video and as much detail as I can muster in the stats. Let's get started. First off, let's talk about the setup. I have 4 plants in my main tent that won't be done for a couple more weeks. So these ladies will be starting out in an AC Infinity Germination Center with their Germination grow lights, a heat mat and a small computer fan to keep the air fresh. The DLI will be around 12 mol/m²/d. They will be planted in root Riot Plugs until they show roots. Then in their final 3 gallon fabric containers. Then into the Mars Hydro 2x2 tent with the TS600 light. 100 watts of pure power. Haha. This should only be for a couple weeks. Just enough time for them to be well established. Then they will go into my AC Infinity 3x3 tent with the S33 grow light. 240 watts of power. I have 2 oscillating clip fans running a slight breeze at all times. I'm using a 4" exhaust fan with filter. I'll be using the AC Infinity bottom feed wick system. I've been using it for quite a while and I find it to extremely efficient. More about this later on in the grow. Let's talk about the strain. Sour Diesel Auto by Seedsman. This strain should be with us for the next 8 to 10 weeks. In my experience, add another week or two just Incase. We can expect a really good yield if I don't screw anything up. Up to 650/m². She has some environmental requirements. Heat is the main thing. Slightly humid for the veg stage and dry for the flowering stage. Being a sativa dominant strain, she will grow tall. I'll be implementing LST and light defoliation for this plant without a doubt. That's about it for now. I'll describe characteristics throughout the run. Finally to our actual ladies. I'm germinating 5 in a glass of water. I plan on keeping 4 total. That's all my tent can fit. So I'll do away with the 5th and work with the 4 best seedlings. They should sink overnight and start to open up. As soon as I see the tap roots, they go in the Root Riot Plugs. That's all for today. See you tomorrow. Oh, and thanks for reading. Wish me luck on this journey. It is a grow off after all. Lol April 21, 2024 4 of the 5 seeds have sunk to the bottom of the cup with my assistance. The 5th one I still floating. However, I don't see any tap roots, so another day or 2. I may pop the sunken seeds in the Root Riot Plugs tomorrow afternoon. The 5th seed may be the reject. If it doesn't pop in a couple days, I'm calling it a loss and working with the 4 other seeds as I originally planned. I could also go down to 3 plants, but I frankly would like the even number of 4. 1 per quadrant. We shall see. I wonder if I should do three 5 gallon plants or four 3 gallon plants. We shall see. The biggest obstacle will be the tight space I have to work with for the next 2 to 3 weeks while the plants already in there are done. I plan on dry trimming for a faster dry. Normally, I like to hang the whole plant. This time around will be wet trimmed and hung in parts. OR placed in my bud drying rack. That's large enough to hold all 4 plants' buds. I should also mention that these seeds are in constant darkness until they go into the plugs. Kind of obvious, but these diaries are not only for my records but set up as an educational piece of work. The environment is looking fine. The air temp is 82°, but the water is definitely no where near that warm. I did have to drop the exhaust fan down and increase the heat mat temp to get the water temp up to a proper temp. Germination Center Environment: I'll be keeping the temp around 82° and the humidity doesn't matter for now. When it matters, I fill the bottom of the Germination Center with water. It helps perfectly with the humidity for growing seedlings. It will also help regulate the temp to around 78° to 79°. April 22, 2024 All 5 ladies have sunk to the bottom of the cup. Now it's just a matter of time for the taproots come out. Somehow, the Germination Center was cold this morning. Like 68° cold. So I took the riser off the dome and cranked the heat mat to bring the heat and humidity up. That being said, the seed water is much cooler than I want. I like warm water for germination. Oh well. The heat mat should fix things in a matter of hours. Everything else looks good. Germination Center Environment: Currently it's at 77° and 94% humidity. It should level out to about 80° and the humidity should stay about the same. I also took the fan off the dome. I'll put it back on when they pop out of their plugs. April 23, 2024 All 5 seeds popped. They all have tiny taproots just starting to form. This is when I plant them in the plugs. They should take a couple days to break surface, but definitely germinated. Now it's just a matter of choosing the 4 best looking seedlings. They are now in the Root Riot Plugs with the temp at 77° and humidity at 95%. The dome is on without the extension for now. Once they show leaves, I'll install the extension and turn the light on. I'll be leaving the light on for 24 hrs. While in the Germination Center. Once out and established, I'll change it to the normal 18/6 light schedule. I was considering starting at 18/6 from the beginning, but I've tried that and feel like it wasn't as successful as 24 hours. Especially because these are autos. The kickstart of light makes total sense. We will see if my theory is correct. Germination Center Environment: Temp: 77.4° RH: 95.4% VPD: 0.15 kPa April 24, 2024 Nobody hopped surface yet today. I don't even see green in the plugs yet. I'm definitely not worried about it. I expect them to break surface in a couple of days. Maybe tomorrow or the day after. Honestly, I won't mind if they take a little bit longer and I can keep them in the Germination Center for a bit longer. It will work out best for my whole grow operation. Small as it is. I gave each seed plug a bit of filtered water today. Just to keep the moisture up. It shouldn't matter too much. The plugs are pre-moistened, so there shouldn't be any issues there. I'll be turning the lights on when I start to see green. They will be on 24 hours for the first week. Then into the main light at 18/6 for the rest of the grow. The environment is a bit bouncy while I work to get the system right. The heat mat is perfect a it's setting, but the fan needs to be messed with and the dome port needs to be adjusted as well. So far it's not too bad, but the temp keeps dropping below 75°. I'll keep a closer eye on it while I get it to acclimate to the proper total environment. Germination Center Environment: Temp: 80.4° RH: 94.7% VPD: 0.19 kPa April 25, 2024 Some ladies are starting to show green! Today we have 3 of the 5 ladies breaking surface with the shells. One of them is absolutely going to have helmet head. Or whatever it's called. I'll be needing to fix that. I'll wait til tomorrow to see how things go. The other 2 are still working their plugs. That being said, I reinstalled the dome extension and turned the lights on to 20% power. The DLI is around 10 mol/m²/d. I'll increase the light power in a day or 2 when the rest of the babies pop up. We should end up with the DLI of 12 mol/m²/d when we start seeing leaves. The environment hasn't been the best. Not my best start by far. I can't keep the temp at a good range. My night time temps are super low and then I get a decent day temp, but then it gets too hot. I'm going to have to figure out the heat mat I think. It's back to normal now, but was like 65° last night. Not good. With the light on now, the temp shouldn't be a problem. Germination Center Environment: Temp: 72.6° (too low) RH: 76.8% VPD: 0.64 kPa April 26, 2024 So far I have 4 ladies fully showing with the 5th lacking any movement. She mush not have actually popped. Or maybe a little late. I'll give it 2 more days and see what happens. Anyway, I think I already have my 4 plants now. They will be labeled A through D. Everything looks great for now. The environment is looking great at 80° and a humidity of 82%. I won't need to mist them at all at this rate. Maybe when they get into the nursery bags I'll need to mist. We shall see. I'll be leaving the light at 20% for another day or two. Then I'll increase the intensity to 12 mol/m²/d. It should start this run out swimmingly. One of the babies had a helmet, so I gently removed that this morning. Other than that, nothing else for the day. Germination Center Environment: Temp: 78.7° RH: 80.0% VPD: 0.69 kPa April 27, 2024 This is when I normally would start a new week, but these ladies are only in the very early seedling stage. Not on veg. Honestly, I would love for a seedling stage week. Now I'm kind of stuck until I see the first set of true leaves. Another few days no doubt. So it throws off my schedule. Oh well. I'll do my best to keep track. I have 1 seed that rooted, but never grew up. I'm calling it a loss for now. So 4 of 5 seeds made it out of the plugs. I also have a 4th one that is super wonky. I'll keep it for now. If it looks all messed up over the next few days, I'll have to toss that one as well and just work with 3 plants. Hopefully it won't come to that. The 3 seedlings that are looking good, look really good. Roots already starting to get exposed. They will be going in the 1/5 gallon nursery bags in a matter of days. Maybe even tomorrow. I don't like too much root to show before transplanting. So that may be a thing tomorrow. I'll increase the light intensity when they are transplanted. It makes the most sense based on the speed they grow. The environment is pretty good. Hovering at a temp of 80° and 87.4% humidity. I also gave them a small misting to keep the humidity up and the babies getting all the water they can get without overdoing it. Germination Center Environment: Temp: 81.2° RH: 88.9% VPD: 0.41 kPa
Likes
17
Share
Likes
12
Share
Well here it is harvest day 😁 some nice purple on the top buds , smell is very fragrant! Buds are a nice size for such low wattage leds. Quite frosty nothing spectacular but frosty all the same, I will update once all dry with weight and smoke report. 🙏 blessing you all good days.
Likes
307
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The #1 keep growing good, the #2 keep turning more and more yellow, Transplanted in 11l. 🕑 Removed 2 Hours, now 18/6 💪 continues, topping, defoliation, training. 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Grow + Zym (1 + 5 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 25% 35 cm. Mars Hydro Fan kit Setting 4 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/
Likes
41
Share
The girl is progressing well. She is receiving around 25 DLI of light. I did a topping.
Likes
3
Share
She is definitely performing. I can smell her on approach. The weather does not look too promising for the next 72 hours…hoping for the best this post full moon rain.
Likes
4
Share
Week is going good aside from me accidently cutting off a stem on pheno 2. If I can properly save the cutting though I might have a chance at another female. Pheno 3 I'm hoping can make some comeback as I really want to flower the plant, its not dead by any means but the way its growing I just cant see it allowing itself to flower the top leaves were barely growing so I topped. Hopefully positive changes within the next week.
Likes
3
Share
Last week of flushing and next week we harvest 😁
Likes
5
Share
@Chubbs
Follow
Weekly update on these absolutely gorgeous girls. I was gone for the beginning of the week and came back today and I swear the flowers have doubled in size. They're smelling super strong and gassy. The flowers are dense as rocks so I hope with the summer heats they'll stay that way and not become airy. All in all Happy Growing.
Processing
Likes
13
Share
Seedsman White Widow. I accidentally killed my first seedling as a sprout by getting it wet right as it was sprouting. Live and learn. Here we go again and she's off to a much better start this time. 👍 My Perpetual Harvest strategy…. Originally my plan was to start 2 seeds each month, but had some seeds from one breeder that did not germinate early in my rotation. Ultimately, this caused single seeds to pop and messed up my 2 at a time plans. But, that seemed to work out OK, because now I think starting one seed every 3 weeks is a better strategy. This should provide me with 4-5 plants at a time, instead of 6. However… Since I need to shut down over the summer because my tent is currently in the attic, I’m starting 2-3 seeds at at time for the last couple of rounds. Plants get fed once weekly on weekends. Seedlings get water only. Plants in vegetation get water and Recharge. Flowering plants get water, Recharge or Big Bloom (Fox Farm). Feeding is done using 2 gallon watering can. Any additional waterings during the week are given on an as needed basis per plant. I lift the plants to help determine which plants are more dry (lighter) and provide water any plants via water bottles and watering spikes. I give each pot a quarter turn every day in an effort to make sure the plants get equal lighting from all sides. I rotate the plant in place by turning the pot 90 degrees (I am not rearranging the layout of the plants in the tent on a daily basis). The soil is an ‘organic super soil’ I mixed myself using organic top soil, organic potting soil, organic compost, organic peat moss, organic perlite, organic vermiculite, lime, epsom salt, expanded clay pellets and Jobe’s organic fast start. I am also recycling my soil and water with Recharge when using recycled soil. For plant training I have tried a variety of things, but my plans now are to do LST bending only, no HST anymore. I may decide to go back to HST again in the future, but I’m curious to compare LST training only to see how that goes. Around week 3 I'll do a FIM pinch once there are 4-5 nodes established. And some defoliation around the 3rd week of flowering. I have been doing HST bending and having good results, but think the HST may be causing the plants to take longer to harvest. I hope FIM/defoliation only will help increase harvests while getting me to harvest sooner. Setup: 1- Grow Tent 24”x48”x72” 2- Viparspectra 300W LED’s (1-V300 & 1-R300) 1- Hanging 100w CFL (26w actual) 1- Carbon Filter w/ 190cfm Fan & 4” ducts 1- 6” clip-on fan 1- 700w electric heater - oil filled radiator (in front of air intake behind tent)
Likes
15
Share
@PiusWaxis
Follow
Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room. With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation. But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.
Likes
18
Share
Replantées en pot de 25 gallons, nos vers vivent dans le substrat depuis une semaine, les nutriments organiques de greenhouse ont été ajoutés à raison de 100gr par pots, le paillis recouvre le tout. Le sol vivant est prêt ! Repotted in 25gal fabric pots, the worms are in the substrate for a week, GreenHouse’s organic dry amendments are mixed into the soil, 100g into each pots, nice layer of mulch on top of it all. The living soil is ready !
Likes
17
Share
@Hoodoo
Follow
2020-08-16 End of week 8 of flowering! Nutrients are still stable with the same amounts (EC=1600/1200). Gonna ride them out until the end of the growth. Gonna start monitoring the trichomes daily so I can figure out when to flush. They look about 100% milky!
Likes
4
Share