Likes
Comments
Share
@Kirsten
Follow
27.5.25: I watered with 5ltrs of dechlorinated water PH'd to 6.3 I added Per 6.5 litres; ♡ 1Tsp Bud Explosion ♡ 7ml Trace PH: 6.3 PPM: 990 SOLUTION TEMP: 30°C SOIL PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 58%. 27.5.25: She has taken very well to all the emergency repairs and, for the first time, started lifting her leaves to the sky. I missed out one day of watering, as I did not believe i would need to water the dafter having fed 5 litres the day before. I watered with 3 ltrs of dechlorinated water PH'd to 6.4 I added Per 6.5 litres; ♡ 1/2 Tsp Ecothrive Biosys ♡ 7ml Trace PH: 6.4 PPM: 590 SOLUTION TEMP: 28°C SOIL PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 58%. 28.5.25: I watered with 2.5ltrs of dechlorinated water PH'd to 6.3 I added Per 6.5 litres; ♡ 1Tsp Bud Explosion ♡ 7ml Trace PH: 6.3 PPM: 990 SOLUTION TEMP: 30°C Still PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 58%. 29.5.25: The plant is drinking constantly now. This one was planted in coco, perlite, and worm castings. Due to this being practically the first time I've used this mix without adding the peat based "light mix," I had not realised how quickly the pots will dry out, especially during the high water consumption of the flowering stage. I realise that I need to be treating it as pure coco. This can be fantastic, for example, if you have just one pot/plant and can provide all the waterings and monitoring continually and regularly. This tends to make you use more nutrients than necessary, as personally I find it difficult to use just plain water. I think many of us still can't help the feeling that we should be adding things to every watering. Therefore, when the frequency of the waterings increases, we are still adding nutrients EVERY time. Which is an overall increase in nutrients, too. For my part, I'm cutting the amount of nutrients per watering. I feel like nutrients are a bit of a crutch to growers. I'm still getting used to the coco and the waterings, but I am really enjoying it. If you don't check your plants multiple times a day, it may not be the best choice of substrate. For me, I'd much rather the pots dry quickly because it reduces the chances of mould and mildew, which I'm always concerned about. The pot was actually top dressed with Canna Terra Soil Mix, as the company I'd purchased from sent the wrong item, and I couldn't get it sorted in time. This has really annoyed me as my top dress went mouldy, and I had to remove the top 1cm. After I used this, that soil became compacted and has remained that way since. Due to this, I would much rather not use these types of substrates. 28.5.25: Watered 1.5ltrs with Trace PH 6.4. 29.5.25: I took everything off the timer and am now running 24/0 light schedule. I want to make the most out of what light is available. The plants need it. My tent is underpowered in that department, so increasing the duration of the light is all I can realistically do. Hopefully, it will help. Watered with the same nutrients as above, 6.5L. PH 6.1. 30.5.25: Watered again, plain water with Ecothrive Biosys 4L. PH 6.3 Tganks fir stopping by and hanging out 😊💚✌️🍃😃
Likes
11
Share
Week 18 Day 120 | 08/11/2021: I just can’t stop looking at them, they are so plump 🍑 I watered them today with just 1L of plain water because I want to harvest them in 4 days and don’t want them to wilt, but at the same time I know it’s better to let the soil be on the dryer side when harvesting. Day 124 | 12/11/2021: Today the beauties are being harvested!!! So exciting because they’ve been growing for a while and I can’t wait to finally vape them. From day 1, no, even from germination, the seeds were so strong and quite resistant to nutrient deficiencies. Very good and strong genes, I’m really happy that I tried them out! I will be hanging them with the stem to dry for 10-14 days, I keep the leaves so that the humidity can stay high in the tent, I used to struggle a lot with humidity when I would hang them without leaves, and then the buds tasted like hay for the next month, so I try to avoid that now. Can’t wait to see that the total weight is! They are quite big but I think the buds are not extremely dense so it could be deceiving 👀
Likes
38
Share
@CANNASIM
Follow
---GENERAL COMMENT--- Girls are at day 4 technically, but i like to update Sunday always, so keep that in mind, is 1/2 a week now. From germination to soil emerging took 3-4 days, no issues at all. 100% germination rate from multiple breeders till now. I will try my best to do a stress free grow again, so will grow mainly naturally. ---RQS EASY BUD--- Ironically the Easy bud is developing better and growing faster than her sister. ---DAY 10 UPDATE--- Over some days she got volume, just started to use RECHARGE, and wow, that thing works, 48H you could tell something is different, since watering with it the stem is thicker and is growing more vigorous, lets see how it will impact overall! ---DAY 14 UPDATE. WEEK 2 FINAL--- This is the last day of this week and this girl is absolutely amazing, she grew a lot, showing already the intension of shooting up more stems, i'm very happy with her, it has been a delight to grow, response in very good. Voodoo juice is of by now, will keep the recharge maintenance every other watering as i'm loving it. Feeding program will start soon!
Likes
16
Share
Plants are definitely Drinking alot. Set up scrog net Kinda late ... As soon as I flowered. Only need net to hold them..not to train them... humidity is in high 60s low 70s. THATS WAY TOO HIGH.. need to get my humidity down to 45%... My main focus is to get a dehumidifier ..and really soon.......
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
36
Share
@Salokin
Follow
Hi All, The week was pretty uneventful, the plant is developing nicely. I removed a leave here and there to make sure maximum light exposure in the middle of the canopy is guaranteed. The buds stopped stretching so I’ll will stop with the boost and add the pk 13/14 to help with the fattening. Dried and smoked a few of the lowest popcorn buds and they are by all means not there, but smell and taste pretty awesome. I have also added a few pictures of the new box that I have built for the cuttings. The box was build pretty low budget, however I will still need to add a better light source as I am currently running on only 60W veg lights. Was planning to buy the Greenception GCx5solo 150W full spectrum LED, as it would fit exactly Inside the box.
Likes
11
Share
By the looks of her on week 9 I can say I Am impressed...she was fed some black strap molasses which I Know she loves...I expect some more heavy rains from tomorrow as the tropical storm passes through let’s see how she holds up after…airflow on this mountain 150M above sea level is really good so she dry out in no time….fingers crossed!
Likes
18
Share
@Haoss
Follow
I need to dry the buds in the dark at 20 degrees in 50% humidity, then transfer them to jars and continue curing 💨
Likes
49
Share
@Roberts
Follow
I had a horrible germination rate then the seedling I finally got was very weak. So I made the best of it, and finished the grow. Frosty buds nice color. Great smell. The Gen 1:11 nutrition works good. Was just the first time using it in DWC. Good looking nugs. Just not one of my best grows. Thank you Mars Hydro, Gen1:11, and Humboldt seed company. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
9
Share
@Kushizlez
Follow
Room is starting to yellow out too soon. Going to hit with a full strength feeding today. I’m still hoping for more swell by day 29. Although for my first indoor run I’m pretty happy. I know what to do for next round and got a sick game plan. The blackberry breath pheno is looking almost done already. I hope it continues to swell because it’s already thick as fuck. I found a small underdeveloped pollen sack on the slurricane #4 that scared the shit out of me. I chopped it off and inspected the whole plant but only found the 1.
Likes
2
Share
@Ninjabuds
Follow
Bubble og I still have 4 of these guys going. A few of them are still dark green and pretty decent growers they have thiner leaves. I'm sure a few of these will be on the chopping block later down a few of them just have crappy start growth and they need the humidity at 75% or above 100% the time with the light lower than normal or they start to shrivel up. That's not all of them just a couple. Also I am only going to flower 8 plants out if the 12 seedling and I have 5 strains going so can't have half my plants bubble og (wish I had room to grow the full 12 plants at a time) It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
9
Share
Some of the buds/ leafs were starting to turn brown. It seems like it was a bit past it's prime, I harvested on day 60 of flower. The strain was 56-63 days Jack Herer by pHenos Nursery. The trichoms looked ready, I did have some issues that I've noted in previous weeks but it smells amazing and I can't wait for it to finish drying and curing!
Processing
Likes
3
Share
@Bankir
Follow
Начинает обрастать трихомами. Понмногу начинаю добавлять рипен. Запах усиливается. Немного проредил листву.
Likes
5
Share
@Nemessis
Follow
Calmag enter this week, the fruit are more big. Next week im gonna enter the PK from Aptus. One of my plants has a magnesium deficiency I think, I hope that with the calmag it will be fine. The smells are already magnificent, the Glookie looks like a packet of candy! The fruits will start to grow nicely by the weekend with the high PK intake
Likes
9
Share
Topping effectué pour arriver à 16 colas Palissage des tiges secondaire aux noeuds du bas afin de commencer à les former pour dans la tente de 90x60 pour qu’il puisse s’épanouir et ainsi pendre tous l’espace On va le garder au maximum à la hauteur qu’il est actuellement et essayer de faire en sorte que les tiges occupe entre 80x50 à 85x55 d’espace dans la box Pour ensuite les laisser monter 10/15cm en hauteur et lancer la floraison À la 3ème photo j’ai fait un dessin pain de la futur mise en formation En rouge ça sera les middle bud qui occuperont l’espace centrale Vert foncée ça sera les bud qui occuperont les espaces gauche /droite du centre de la longueur de la grande box Pour l’autre vert ça sera le comblement de la largeur Le dessin n’est pas la finalité du projet c’est juste la suite d’actuellement On avisera au moment venu du bouquet fin Pour la floraison il y aura la mise en place d’un 2ème panneaux SANlight dans la grande boxe afin de croiser les spectre et donner une meilleur pénétration lumineuse pour la floraison, j’espère atteindre un beau rendement au cm2
Likes
21
Share
@w33dhawk
Follow
Hi liebe Freunde des grow sports ✌️, ich hoffe die Woche mir euren Ladys war genau so problemlos wie meine 😁. So zum wesentlichen am 30.04.22 war wie immer nur zu schauen dann am sonntag den 01.05.22 war giessen angesagt, reines wasser (ph 6,5) und diesmal 0,4 g/L wasser microbes von biobizz werde diese woche keine Nahrung zuführen da ich finde das die ladys ein ziemlich sattes grün vorweisen. Montag den 02.05.22 war Nach justieren der Äste damit die t-Form einiger maßen erhalten bleibt. Am 03.05.22 musste wieder alles neu justieren da die befestigung nicht richtig saß. 04.05.22 für die Lady im 3,6 L Topf gab es heute das 2. Topping und weiteres justieren für sie damit die t Form bleibt. Am 05.05.22 war dann das 2. Topping für die anderen 4 die im Zelt bleiben dran und wieder neues fixieren der t-Form. Und am 06.05.22 musste ich wieder giessen reines wasser (Ph 6,5) das war es mal wieder für diese woche, euch allen ein Mega wochen ende........
Likes
6
Share
This one was Baked in Paris by PerfectTreeSeeds, grown with GreenPlanetNutrients only! Check the other weeks to see the ones with AptusPlantTech! Great zkittles terpz, awesome structure, beautiful colours. So, this is the one I liked the most since day one, love her colours, her structure and her smell, but precisely because of that I was too excited to harvest her that I forgot to take proper photos so I leave the ones of her last days .. Will try to update soon with some pictures of her on the drying screen ahah
Likes
11
Share
Everything after germination has been pretty smooth. The plants in veg had a couple small brown spots due to under watering but no extreme signs or any abnormalities.
Likes
Comments
Share
Best Cannabis Nutrients Organic Brand 2025
Big congrats to BioBizz, voted Best Cannabis Nutrients Organic Brand 2025 by our growers! Thanks to our awesome community for making this happen! @biobizzwwo @spannabis_official