Likes
Comments
Share
I love this lady she exploded, beautiful buds loaded with trichomes, everywhere, smells amazing, beautiful purples hehe 😋👌💚
Likes
3
Share
She's looking very healthy,maybe a little small for the days she has but it's ok, let's see how she performs.
Processing
Likes
65
Share
Coming into the home stretch here. I've been flushing for a week, going to give her one more good watering then plan on harvesting this weekend. I still don't see any amber trichomes, but I don't want the dying leaves to cause any bud rot, so amber or not she's coming down this weekend. The smell is super STRONG!!!👍
Likes
29
Share
Day 21 - ThunderHaze Auto This plant looks like it’s coming along just fine; she looks really healthy and all new growth looks free of burns so I’m going to start feeding nutes again this week. If the lower nodes branch out far enough I will begin LST'ing with 6” garden staples. Technique: Topped on day 18 and seems to have handled it fine. Light: MarsHydro 300 set at 15" above plant providing about ~28,000 LUX Watering/Nutrients: plain RO water Environment: 4x2 Grow Tent. Temps low of 68 - high of 91 with RH of 80% Soil: ~6 gallons of Foxfarm Ocean Forest w/ 4 extra quarts of perlite added. If you see anywhere that you think I can improve please drop a comment – thanks for reading
Likes
200
Share
@yan420
Follow
🌸🍊✨🍭🌸🍊✨🍭🌸🍊✨🍭🌸 Back at it with Kannabia — huge thanks for the NEW EXCLUSIVE Upcoming Kannabia's seed Launch 🙏🍨🍊 Grateful for the trust and for everyone following along, I’ll run her clean and showcase what she can do. Dessert-party goals: berry–citrus sherbet terps, creamy finish, tight stacks, easy trim, zero drama. Veg 24/0, clean manifold + LST, flip on a happy, even canopy. Coco’s fresh, seed goes in now. 🚀 Added on 12.10.2025 🌞 Light conditions: Limited direct light for the first 4 weeks — ~4 h/day on weekdays and ~10–11 h on weekends due to tent sharing and work schedule. 🌸🍊✨🍭🌸🍊✨🍭🌸🍊✨🍭🌸 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 10.08.25 GW1 Sowed seed, soaked starter pot with #1 12.08.25 GW1 Seed popped hip hip hurray 28.08.25 VW2 Stopped using GreenBuzzBloom, took it out of the schedule. 01.09.25 VW3 TriPartMicro 10→30ml, TriPart bloom 10→30ml 12.09.25 VW4 Applied nemadodes against thrips and fungus gnats. 20.09.25 VW6 topped and trained for first time, decided against a full manifold as I lost a few weeks already. 26.09.25 VW7 Topped her one more time for 8 mains 27.09.25 VW7 Topped up the pot with perlite instead of clay pebbles this time, just trying things out, TriPartMicro 30→40ml , TriPartBloom 30→20ml 10.10.25 VW9 have her a haircut, umm be trimming the side shoots tomorrow, rest in the video 📹 12.10.25 VW9 done some extra trimming to clean up a bit and chose two extra side shoots to nurture info mains, so kept the 8 original mains plus 2 rest in the video 📹 17.10.25 VW9 FfJ/fpj fish mix 30 → 60 ml 20.10.25 VW10 Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 24.10.25 VW11 did a defoliation and trimming session 📹 27.10.25 VW11 Epsom Salt 0 → 2.5, Calcium Nitrate 3 → 9 g 01.11.25 VW12 CalMag 60 → 30ml, TriPartBloom 20 → 30ml, Magnesium 2.5 → 3.5g 02.11.25 VW12 Did a cleanup in preparation for flowering, rest in the video 📸 12.11.25 VW13 Did another cleanup in the tent 🎥, also switched to the FERMAKOR PK Micro schedule, (10.11.25) added Phosphoric acid as a pH down in preparation for flowering 14.11.25 FW1 FERMAKOR PK Micros 40 → 50 ml 05.12.25 FW3 about 2 weeks ago Calcium Nitrate 35 g → 25 g, FERMAKOR PK Micros 50 ml → 60 ml 12.12.25 FW4 Calcium Nitrate 25 g → 20 g, FERMAKOR PK Micros 60 ml → 80ml 16.12.25 FW4 Calcium Nitrate 20 g → 17 g, FERMAKOR PK Micros 80 ml → 110 ml 20.12.25 Calcium Nitrate 17 g → 15 g 26.12.25 Ffj fpj 30 →0ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Fed about 5l a day of #1 and on the weekends I do a pure FERMAKOR PK flush 2l runoff (*RUNOFF reused for tomato plants) 💧💧💧💧💧💧💧💧💧 🌱 Nutrients in 30 L #1 – FERMAKOR (progression kept) 💧💧💧💧💧💧💧💧💧 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g → 35 g → 25 g → 20 g → 17 g → 15 g = 1.50 g/L → 1.33 g/L → 1.17 g/L → 0.83 g/L → 0.67 g/L → 0.57 g/L → 0.50 g/L = 207 ppm N / 253 ppm Ca → 184 / 225 → 161 / 197 → 115 / 141 → 92 / 112 → 78 / 96 → 69 / 84 PK Concentrate (FERMAKOR Base): 30 → 40 ml → 50 ml → 60 ml → 80 ml → 110 ml = 1.00 → 1.33 ml/L → 1.67 ml/L → 2.00 ml/L → 2.67 ml/L → 3.67 ml/L → balanced 1:1 P:K + light micros (from extract) Home-made FFJ/FPJ (Fish + Veg): 30 ml → 0 ml = 1.00 ml/L → 0.00 ml/L Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → ~26 ppm Mg + ~35 ppm S Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm · Mn 0.7 ppm · Zn 0.3 ppm · Cu 0.3 ppm · B 0.1 ppm · Mo 0.02 ppm Phosphoric Acid (pH down) + Citric Acid (chelation): as needed → First set pH with phosphoric acid, then add a little citric only if you want extra chelation Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL (corrected): Liquids (PK + FFJ/FPJ): 60 → 70 → 80 → 90 → 110 → 140 → 110 ml per 30 L = 2.00 → 2.33 → 2.67 → 3.00 → 3.67 → 4.67 → 3.67 ml/L Solids (CaNO₃ + Epsom + Fetrilon): 53.5 → 48.5 → 43.5 → 33.5 → 28.5 → 25.5 → 23.5 g per 30 L = 1.78 → 1.62 → 1.45 → 1.12 → 0.95 → 0.85 → 0.78 g/L ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍊🍧🌬️🍬🍊🍧🌬️🍬🍊🍧🌬️🍬 Mystery seed (Kannabia Seeds) — NEW EXCLUSIVE 🍊🍧🌬️🍬🍊🍧🌬️🍬🍊🍧🌬️🍬 Species: Hybrid (GF / swift-flowering line) Genetics: TBA (breeder sheet pending) THC: TBA Effect: Euphoric, relaxed, creative (target profile) Flavor: Berry–citrus sherbet, sweet candy, creamy finish Flowering (indoors): ~6–7 weeks target (GF) Resistance: High (aim: no drama) Indoor yield: TBA Outdoor yield: TBA Structure: TBA Notes: Brand-new exclusive from Kannabia’s GF line — I’ll update specs when the breeder card drops. Goal is rich sherbet terps (berry–citrus + cream), low leaf-to-calyx, easy trim. Stage harvest stays on the table if tops finish early. YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31
Likes
137
Share
📅 Week 13 | Days 92–98 📅 🌼🌸🌺 Flowering Phase 🌼🌸🌺 Day 98 🌞 🔸 Poison Envy continues to develop beautifully. The buds have become noticeably denser compared to last week, with an impressive amount of resin forming. Trichomes are mostly milky now, with a few still clear - no amber ones yet. 🔸 The smell is evolving too: still that strong musty "forgotten laundry" funk, but now with a distinct sweet-spicy berry twist, almost like overripe blackberries. Very pungent! 🔸 Unfortunately, the humidity is still too high, but better than last week (currently 63%), which could become a problem. Today I finally turned on the dehumidifier and increased airflow using all clip fans at max setting. The dehumidifier now maintains a constant relative humidity of 50-60%, which I am very satisfied with. It does make it 2-3 degrees warmer in the tent, but I can live with that. 🔸Now give them 1-2 weeks of overdrive from AN and then only water. She drinks significantly less. 📈 Current Conditions 🌡️🔆 = 27°C 🌡️🌜 = 20°C 💨 VPD Target = 1.4 - 1.6 💨 Humidity = 63% → Target: below 60% 🔦 PPFD = 900 µmol (12/12) 🔦⌚ DLI = ~38 🛠️ Setup (unchanged) 💡 Lights: 2 x Sanlight Evo 4-120 @ 90% ⛺ Tent: 120 x 120 x 180 🍯 Pot Size: 18 liters 🌱 Medium: Bio-Bizz Light Mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap water (EC 0.5)
Likes
7
Share
Likes
3
Share
@Gram_Solo
Follow
4 of them are being flushed now and will be put into dark in few days and then we chop em! Rest are a little behind but kicking on Frosty nugs now!!!
Likes
4
Share
Day 1 week 2 Day 2 week 2 Day 3 week 2
Processing
Likes
12
Share
@GrowGuy97
Follow
Day 7 - Everything seems to be going ok they are all growing about the same pace! Day 8 - They are all growing pretty equal right now , extremely happy with how things are going!✌️🏼🌱 Day 11 - one plant has some twisted leaves hopefully it’s nothing serious😫 will be keeping a eye on her, other than that they all seem to be growing great! Thanks for following & happy growing friends!✌️🏼🌱 Day 13 - have a few with some weird leaves & growing a little slow, other 3 are growing pretty good! Hopefully they all do alright, fingers crossed! Happy growing friends!
Processing
Likes
5
Share
Início mais uma etapa depois da minha última colheita !todos sao clones das plantas anteriores kush critico e algumas estao revegetando ainda e outras esta ficando prontas para proxima flora!
Likes
11
Share
@Chubbs
Follow
420Fastbuds FBT2304/Week12 These beautiful girls are getting close to being finished, and really, I can not wait. The fade on the bigger one is a little more heavier than the other but over all health seems to be great. They are super super sweet smelling which is intoxicating when you get a wiff. Checking the trichs and still seeing a few clear on the taller one so will hold off a couple days before looking again and chopping. All in all Happy Growing
Likes
3
Share
È sbucata ...inizio del suo ciclo.. Domani inizierò la conta dei giorni e settimane....forza bella mia .......sebra che si e bloccata....... Sta iniziando a crescere ma molto lentamente..deve essersi stressata dall'inizio
Likes
49
Share
@Roberts
Follow
Green Cure CBD is growing good for a solo cup grow. She got her first lst and defoliation today. She grew 2 inches over the course of the week. I figure in about 2 weeks she will be root bound. Everything is looking good. Thank you Medic Grow, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
17
Share
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......