I really had no idea what i was getting into with these F2's.... Currently the freaky mutant is on 18/6 and has been put on it since today to finish (maybe 3-5 days on 18/6) The exodus, i ended up putting back on 18/6 after 2 days on 12/12, the reason for how long its taking but looking nice, wish i defol'd a bit different, but its all gunna be tops!

started to flower this week i dont think im getting a big yield but at least i nailed the nutrients and the plant didnt show any deficiencies (yet)

Just feeding and letting them do their own thing. They have done really well for only being in 1litre pots.

Hey bros! Around 362g wet, so a lot less from her previous version. Was it the fert I gave less or was it the time of harvest that was around a week earlier? Anyways, I tested and smoked a joint from a 1 week drying bud and it was great. Thanks for following! On my next diary I will do a clone of this plant. 3rd generation. Please, follow up. Thanks all! Tchau, do Brazil!

purple queen is a absolute beast she's stacking colas like arms and extra frosty she smells like a potent kush so far and is surprisingly sticky already ,She's drinking 4l a day to get runoff around a litre and half and dosnt seem to be slowing she stunning to look at shaped wicked and just shining with how much frost is there already going to be given a mini flush and few days water and will start back on nutes adjusted some of the ties to keep good air flow and light penetration nothing else to say she's happy and healthy thanks for reading happy growing guys

Welp I just Doubled up on my feed bc last week seem to not hurt feed more this is my last time feed rain water for here on out I’m let pots dry out a lot the start giving hell of water I’m think be done in the next two week a lot can be done in two week keep my finger crossed I’m ready clip some this fire up jar up and smoke it this all was hardest time for me this is day 100 from seed day 46 of flower

May 1st - pH 6.0, PPM 1280, 2.6 EC, 79/70f, 35% humidity - Water change, added purpinator since I found it on sale, plant seems happy from this past week, great sign. :) May 2nd - pH 5.9 -> 6.2, PPM 1380 -> 1260, 2.5 EC, 80/69f, 36% humidity - adjusted pH, likes to read a bit higher than usual according to my pH strips (~.2ish I believe), added a bit of distilled water, PPM was a bit high when testing this morning no idea why though. The plant seems O.K. May 3rd - pH 6.3, PPM 1350, 2.7 EC, 77/68f, 55% humidity - I started to add humidity to the cabinet to keep temps down and to help during flowering, I've got it outside the cabinet plugged into a humidity inkbird set to 60% RH and it'll allow it to fall 12.5% before turning back on. (Not trying run it 24/7) May 4th - pH 6.2, PPM 1350, 2.7 EC, 79/72f, 57% humidity - The plant is chilling, notice maybe some yellow spots on some fan leaves, if this continues I will turn off the humidifier, as that's what happened last time... Also raised the lights again, I wonder how big this one will get. May 5th - pH 6.1 -> 6.3, PPM 1280, 2.6 EC , 77/73f, 50% humidity - upped pH a tiny bit, added water to lower PPM May 6th - pH 6.5 -> 5.9, PPM 1350, 2.7 EC, 75/72f, 42% humidity - adjusted pH and added a little bit of water May 7th - pH 6.1, PPM 1600, 3.2 EC, 78/68f, 44% humidity - bucket is low on water, didn’t want to add a whole thing just to change it tomorrow, will start with more water (3.5gal) and add more water throughout the week compared to this week, I have started to experience clawing, possibly due to nitrogen toxicity, hoping to fix this upcoming week. And a noticed a few tiny rust spots on leaves randomly on the plant (not like it’s just fans or just old or just new growth, it’s sorta spread? Hoping it’s calmag?) Plant looks nice otherwise

Did some major defoliation. Seems to be working good!

Ending up trans set 1 got a lil more space in GH...topped up the other also did some defoliation(everything) and LST HST( set 1&2)

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

Let’s go the two phenos are pushing strong If you’re thinking about trying them out, don’t miss this 👇 Use my code for 20% OFF 💸💫 🎉 Discount Code: DFARMER23 🎉 Go grab your favourites before they’re gone 🏃‍♀️🔥

The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Day 1 we had partly cloudy skies, low humidity, and temps in the lower 80's. I watered about 1/4 gallons from the water hose for each pot. Day 2 we had lite showers in the morning, partly cloudy skies and temperatures in the low 80's the remainder of the day. The rain provided the water today. Day 3 we had showers in the early morning until afternoon. Then it was mostly sunny with high temperature around 79. I noticed a few spots of powdery mildew on the leaves. I removed the leaves. Day 4 we had lots of sunshine and temperatures in the low 80's. I watered about a half gallon out of the water hose. Day 5 we had thunderstorms, rain, and drizzle early morning and intermittently throughout the day. Temperatures were in the lower 80's. Day 6 we had thunderstorms and rain in the morning, then rain and drizzle intermittently throughout the day. High temperature for the day was 71°. It was raining so much I brought them inside. They've proven very resistant to boytritis, but this close to finish, I'm not testing them further. Four hours of rain in below 70°F temps at night is tuff enough. Day 7 we had lots of sunshine and high temperature around 84°. The #2 plant had a very mild outbreak of powdery mildew on the lower leaves this week. The #1 plant has proven immune. These girls are nearly finished. They've gotten loud smelling. The #2 plant smells like straight cat piss and very loud. The #1 plant smells like fruit roll ups berry and loud. I'll harvest these sometime next week. Over a very hardy strain that's taken a beating in the Ozarks Spring.

Si presenta bene veramente bene ...un po' lenta nel gonfiarsi ma promette bene. È piena di tricomi e presenta popcorn rosa e arancioni. Ora devo solo aspettare il mio nuovo giocattolo mars hydro ts 1000 sicuramente avrà una marcia in più! Alla prossima settimana Dajeforte growers!

This one looks really promising🤩

I thought the plants would grow a bit faster, but I also pruned a lot of shoots. The root mass is now increasing rapidly on both plants, and this time they're staying white and healthy. I think the light penetration into the reservoir is lower, the oxygen supply is better thanks to the new air pump, and the Athena Cleanse from the start is also helping. Now I need to figure out the best power setting for the new lamp and the exact setting for the sweet spot. The temperatures should finally rise, so I can soon do without the radiators. It's still much too cold in the basement. I am always grateful for advice and tips from experienced growers. 😉 Especially growers with experience using Athena: is IPW worth it ? 04/26/2026 Damn. Another stupid accident caused trouble. 😡😡 One of the green radiators rolled over to the Sour Fraise and burned the stem of the plant. All the bark is gone all the way around. I cut the plant above the burned area, treated the stem with Clonex gel, and placed it in a rockwool cube soaked in a cloning mixture according to the Athena scheme. Let's hope it works.

Growing feminized seeds from White Label Seed Company is an affordable and easy method of obtaining a high quality harvest. White Label was the first company associated with the Sensi gene-bank to make feminized varieties available to the public. As the popularity of growing feminized cannabis has grown, the number of White Label feminized varieties has increased to keep pace with the demand. Starting to add some enzymes and some nutrients with the roots booster. Giving more place for the plants to grow, adding the MH to increase light coverage. Plants started to grow, it’s nearly the time to transplant into bigger pots. Pots gets lightweight faster, and need to get water more often, but feeding and adding nutrients to the water only once a week, at this stage, is enough ! (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)

Last 3 weeks before the flush

Such a fast/strong grower. Minimal training needed.. Thi S I believe is the strain... I'm doing Seedmans - Strawberry Banana and it also has similar structure

Had a bad PH swing causing the leaf color. Quickly fixed