Likes
Comments
Share
@Rangaku
Follow
First week of flower went smooth as , nice growth and everything as expected. Just getting into the defol and tying down branches to get light where it needs to go . Same same next week.
Likes
46
Share
Soooo, nach langem Warten (ich bitte um Entschuldigung, es kam immer irgendwas dazwischen), nun die Ernte! Nachdem ich jetzt alle Sorten verkostet habe, kann ich euch nun mein Fazit präsentieren. Im Großen und Ganzen bin ich eigentlich ganz zufrieden mit dem Ergebnis, muss aber auch gestehen, dass ich bei der ein oder anderen Strain doch etwas mehr erwartet habe. Bei den nun folgenden Bewertungen möchte ich noch anmerken, dass sich diese rein auf den Outdoor-Anbau der jeweiligen Sorte und nur auf den einen bekannten Phäno beziehen. Man kann grundlegend behaupten, dass sich alle Sorten doch sehr solide geschlagen haben, und das bei diesem … naja, sagen wir mal wechselhaften Sommer. Allerdings merke ich einfach, dass sie lange nicht ihr volles Potenzial ausgeschöpft hatten, was ich immer etwas schade finde. Ich bin trotzdem froh, dieses Projekt durchgezogen zu haben, und gehe mit reichlich neuen Erkenntnissen sowie einem abwechslungsreichen Stash in die besinnliche Zeit. Was hat mich grundlegend bei den meisten Sorten gestört? Bei fast allen Sorten, mit Ausnahme der Hella Jelly und der Lemon Tree (wer hätt's gedacht), waren die Terps doch sehr flüchtig. Im Vape kamen sie wirklich gut zur Geltung, wenn man sie allerdings im Joint (pur, versteht sich) geraucht hatte, haben sie oft nach den ersten Zügen an Präsenz verloren, was wirklich schade ist. Dies ist aber wahrscheinlich auf die Anbaubedingungen zurückzuführen und soll den Breedern keinesfalls ihre Qualität absprechen. Wie schon in einem vorigen Kommentar erwähnt, haben sie einfach nicht ihr volles genetisches Potenzial erreichen können. Ich bin mir des Weiteren auch nicht sicher, ob ich beim nächsten Mal wieder auf die Dryferm-Bags setzen werde. Es war doch ein ziemliches Gefummel, bis man die Blüten ohne Kontakt zueinander in die Beutel verfrachtet hatte. Außerdem hat es meiner Meinung nach die Trocknungszeit eher verkürzt, obwohl ich mich an die Temperatur- und Luftfeuchtigkeitsrange gehalten hatte, was ich auch nicht unbedingt begrüße. Und zu guter Letzt sind sie auch echt nicht billig, wenn man bedenkt, dass ich pro Pflanze teilweise über 4 Beutel benötigt hatte (pro 3 Stk. ca. 25 Euro) und sie laut Hersteller nur dreimal verwendet werden sollten. Das ist doch auf Dauer ein ganz schönes Investment. Aber das sind nur meine 2 Cent zu dem Thema :). Nach und nach sollten jetzt hier die Erntereports eintrudeln. Ich hoffe, ich schaffe alles heute. Falls nein, seht es mir bitte nach. Falls ihr noch spezifische Fragen zu einer Sorte habt, lasst es mich einfach wissen, dann bekommt ihr noch eine ausführlichere Beschreibung. PS: Die Filmore-Slim musste ich leider fast komplett entsorgen. Sie hatte die festesten Blüten, die ich je bei einer Outdoorpflanze gesehen habe, was ihr leider zum Verhängnis geworden ist (durchgeschimmelt). Von ihr hatte ich leider keine rauchbaren Blüten. Von der Optik war sie auf jeden Fall ein Champion! Ich habe von allen Sorten Fresh Frozen in der Gefriertruhe, die ich in der kommenden Zeit wachsen möchte (auch von der Filmore Slim). Also kann ich sie hoffentlich als Konzentrat verkosten. Das soll es gewesen sein. Ich wünsche euch viel Spaß mit den folgenden Ernteberichten und eine ruhige, besinnliche Weihnachtszeit mit euren Liebsten! Wir hören uns dann hoffentlich im nächsten Jahr wieder, mit vielen neuen spannenden Projekten. Peace!
Likes
13
Share
Likes
3
Share
@CalGonJim
Follow
3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs
Likes
1
Share
@Mo_Powers
Follow
She’s grown lovely over the last week and has more than doubled in size. The weather last week was fairly mild, with an average temperature of 20 degrees. She’s healthy and full of life.
Likes
Comments
Share
@Bpsb4_2
Follow
Дефки отрастили корни и переехали в горшки) Тутанхамон начал активно набирать после увеличения базы до 3 мл/л. Растем...
Likes
11
Share
*Week 3 Flower - 09/10* Blimburn Apple Fritter - Seedsman Genetics Critical+2.0 Healthy - 0 signs on of deficiencies Most fan leaves have been stripped; - Lighter defoliation - Aggressive LST on main colas *Week 3 Flower Mid-week update 09/13* Approximately 3 inch increase in Height on both plants - Critical+2.0 - Seedsman Genetics - Blumburn Apple Fritter 1 Gallon increase on water feed (Nutes included) Budsite density has increased. Light defoliation *End of week recap 09/16* (Week 3 Flower) BlimBurn - Apple Fritter - 47 Inches - Flowering processing accordingly - 0 deficiencies Seedsman Genetics - Critical+2.0 - 46 Inches - Flowering processing accordingly - 0 deficiencies Increased water feed (2.5 gallons every day +Nutes) *SEE UPDATE END OF WEEK VIDEO RECAP*
Likes
20
Share
She looks super heath and happy, I Supercroped her to get much more light penetracion and avoid a high height because I don't want her to be seen from the street,looks like a big green spider. Let's see how this beauty performs,she's smelling pretty strong so far,this is gonna be beautiful to watch! 💚😍🤤 Peace everybody! 💚💛❤️✌️🌱
Likes
8
Share
This week I let the plant grow freely with no training or cuts applied. I’m waiting for the branches to reach 5 nodes before doing the next topping at the 3rd node, so for now the focus is just on healthy growth and recovery. Everything is developing nicely, and the structure is getting ready for the next apical cut 💪🌿
Processing
Likes
28
Share
New weekly video uploads and more! See what’s happening in the Cabbage Patch! Day 14 Flower! Plants looking very h@ppy. Can’t wait to get in there and give it’s last defoliation. Day 16 - She’s stacking up nice! Just need to water when dry. She’s on cruise control! Day 20 - Defoliation video for ya! Cheers 🍻
Likes
Comments
Share
🌿 Grow-Tagebuch – Woche 4: Struktur, Selektion & Stabilisierung 📅 Zeitraum: KW 44 - 04.10.25-11.10.25 Phase: Mittlere Vegetation 📍 Setup: Indoor-Growtent mit LED-Beleuchtung, reflektierenden Wänden, aktiver Luftzirkulation, 20+ beschriftete Töpfe 🔍 Wochenüberblick Wuchsverhalten: Die Pflanzen zeigen nun deutlich differenzierte Phänotypen. Einige Strains entwickeln kräftige Haupttriebe und eine kompakte Blattstruktur. Andere zeigen eine leichte Streckung – hier wurde die Lichtdistanz angepasst. Pflege & Klima: Temperatur: konstant bei 23–24 °C Luftfeuchtigkeit: gesenkt auf ~50 % zur Vorbereitung auf Vorblüte Lichtintensität: leicht erhöht auf ~400 PPFD Luftzirkulation: Ventilator läuft 24/7, leichte Rotation der Pflanzen zur Gleichverteilung Nährstoffmanagement: Vegi-Dünger wurde auf EC ~1.2 erhöht. CalMag wird weiterhin punktuell eingesetzt. Keine Anzeichen von Nährstoffmangel oder Überdüngung – Blätter sind sattgrün, keine Verfärbungen oder Kräuselungen. 📚 Lernimpuls der Woche „Jetzt beginnt die Architektur der Pflanze – wer formt, gewinnt.“ Die vierte Woche ist ideal für Low Stress Training (LST), Topping oder leichtes Defoliieren. Ziel ist es, die Energieverteilung zu optimieren und Licht gleichmäßig auf alle Triebe zu bringen. Tipp: Beim Topping immer auf die dritte bis fünfte Internodie achten – dort ist die Pflanze stabil genug und reagiert mit kräftigem Seitentrieb.
Likes
5
Share
@Bak2Blk
Follow
My girls are doing fabulous in their new tent. I'm so excited about this grow, man... 6/20: So I topped GDP2... she's just entering her 4th week. She's growing so much faster than GDP1 and BK at this point. I was having watering issues during this point with them 2. I'm thinking I am just going to top 2 more times and not LST. Honestly I just don't feel like adding another LST lololol 😅😆😆 6/23: So I learned that I accidentally fimmed Lil GDP2 when attempting to top. Had my question answered pretty quickly and he was very helpful. So instead of creating 2 new colas, looks like I created 3... #winning 😊😊 It's only been 3 days since I topped GDP2 and her 3 additional colas are already growing in really well.
Likes
1
Share
@EUROGROW
Follow
WEEK 3 ! They grew like fu*k this week and all started to look healthy again since the first set of leaves were kinda bleached. it was most def PH issues, I think I found my sweet spot at PH 6. Tonight I will raise the LED to 500w and start adding Co2. I also added an extra pot full of coco and nutrients under each pots since the roots were already popping through my Air Pots.
Likes
1
Share
So where do I start they are both the same strain but just growing completely different. The first picture is super frost growing strong while the second still seem to be in the beginning of flower stage. We will just keep an eye on it from week to week
Likes
89
Share
The journey is over for this lady, she is 1m tall, the buds are smelling crazy good and stacked pretty well, I really wish i had a free tent for this lady to fully open her while still in pre flower but I'm happy anyway 🙌
Likes
5
Share
5/07/24 day 15 I was worried with how small she is, I started her a little early for outdoor so she hasn’t been getting proper lighting but she’s not too far behind other plants at this age. Hopefully she’s set her roots deep and is ready to grow upwards 5/11 she’s loves the sun so much. I was worried about her but she’s gonna be fine 🌱 5/12/24 I gave her a tsp of Terp Tea Grow 711. This last week she had grown very well, she has 3 nodes total and is working on more
Likes
6
Share
Watermelon Candy is alive! Canna pro+ 30% perlite from pokon 60 gram easy boost 20 grams easy roots